Amine Treating and Sulfur Recovery Technology Selection Training Course
Practical selection of amine solvents, Claus layouts and tail gas routes for engineers and operators planning sour gas and refinery revamps.
This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 7 – 11 December 2026 in Milan. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Milan
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
December 2026
January 2027
February 2027
March 2027
May 2027
June 2027
July 2027
August 2027
September 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Amine Treating and Sulfur Recovery Technology Selection is a 1-week training course for gas processing engineers, refinery process engineers and senior plant operators who compare solvent, Claus and tail gas options, and it ends with a sulphur block technology screening matrix. Tighter sulphur emission limits, sourer feeds and ageing units force owners to revisit process choices before revamps. Jupiter Prime Training delivers this selection work.
Why Amine Treating and Sulfur Recovery Technology Selection Matters Now
Three forces shape these choices: feeds richer in hydrogen sulphide and carbon dioxide than design, stricter incinerator stack limits, and owners seeking more throughput from existing absorbers and furnaces. A wrong solvent or tail gas route costs energy, solvent and emission exceedances; a sound choice gains capacity without new trains. The course rests on recognised process engineering practice, the modified Claus process, hydrogenation and amine tail gas treating, and lifecycle cost comparison rather than any single vendor licence.
Who Gains Most from Amine Treating and Sulfur Recovery Technology Selection
- Process engineers who size absorbers, regenerators and reboiler duty for sour gas trains
- Refinery engineers responsible for sour water stripper gas and amine regeneration off-gas routing
- Senior operators who run Claus furnaces, converters and sulphur condensers day to day
- Technical support staff who evaluate licensor proposals and revamp studies
- Environmental engineers who track stack sulphur dioxide and incinerator performance
A sulphur complex gains most when its process, operations and environmental engineers attend together.
Amine Treating and Sulfur Recovery Technology Selection Capabilities
Participants weigh solvents, furnaces and tail gas routes against feed, recovery and energy.
- Compare MEA, DEA, MDEA and formulated solvents for selective hydrogen sulphide removal — solvent change decisions
- Calculate amine circulation, lean loading and reboiler steam demand — regenerator revamp scope
- Specify foaming and corrosion controls such as filtration, heat stable salt removal and metallurgy — reliability engineers
- Assess straight-through, split-flow and oxygen-enriched Claus configurations — capacity expansion choices
- Weigh hydrogenation-amine, sub-dewpoint and direct oxidation tail gas options — environmental permitting teams
- Build a technology screening matrix linking recovery, energy and lifecycle cost — plant management
Key Amine Treating and Sulfur Recovery Technology Selection Terms
- Lean Loading — moles of acid gas left in regenerated amine per mole of amine, setting how much gas the absorber can treat.
- Heat Stable Salts — amine degradation products that cannot be stripped by heat, reducing capacity and driving corrosion.
- Modified Claus Process — thermal oxidation of part of the hydrogen sulphide followed by catalytic conversion to elemental sulphur.
- Ammonia Destruction — high furnace temperature that breaks down ammonia from sour water stripper gas to prevent salt plugging.
- Tail Gas Treating — processing of Claus residual gas to recover remaining sulphur compounds before incineration.
- Sulphur Recovery Efficiency — share of sulphur entering the unit that leaves as liquid sulphur rather than as stack emissions.
Amine Treating and Sulfur Recovery Technology Selection Day by Day
Day 1: Sour Feeds and Selection Drivers
- Feed Gas Composition Review — Hydrogen Sulphide to Carbon Dioxide Ratio Effects
- Product Gas and Sulphur Specifications — Required Treating Depth
- Acid Gas Removal Process Families — Chemical Versus Physical Solvent Choice
- Stack Emission Limits in General Terms — Recovery Target Setting
- Selection Criteria Weighting — Energy, Reliability and Capital Balance
Day 2: Amine Solvents and Absorber Regenerator Design
- Primary, Secondary and Tertiary Amine Chemistry — Selectivity Trade-Offs
- Formulated and Hindered Amine Options — Solvent Swap Feasibility
- Absorber Tray and Packing Selection — Contactor Capacity Limits
- Regenerator Reboiler Duty and Reflux Ratio — Steam Cost Decisions
- Lean Rich Exchanger and Flash Drum Sizing — Hydrocarbon Carry-Over Control
Day 3: Solvent Health, Foaming and Corrosion
- Foaming Root Cause Diagnosis — Antifoam Versus Filtration Decisions
- Heat Stable Salt Monitoring and Reclaiming — Solvent Replacement Timing
- Rich Amine Corrosion Mechanisms — Metallurgy Upgrade Choices
- Carbon Bed and Cartridge Filtration Design — Solvent Cleanliness Targets
- Amine Unit Troubleshooting Charts — Off-Spec Treated Gas Response
Day 4: Claus Configurations and Tail Gas Routes
- Straight-Through and Split-Flow Furnace Layouts — Lean Acid Gas Handling
- Oxygen Enrichment Levels — Capacity Gain Versus Refractory Limits
- Converter Catalyst and Reheat Methods — Conversion Per Stage
- Hydrogenation and Amine Tail Gas Treating — High Recovery Targets
- Sub-Dewpoint and Direct Oxidation Processes — Smaller Unit Options
Day 5: Practising the Sulphur Block Technology Screening Matrix
- Feed Case Definition From Day One Drivers — Design Basis Agreement
- Solvent Option Scoring Using Day Two Data — Treating Route Shortlist
- Reliability Risk Ranking From Day Three Findings — Operating Cost Exposure
- Claus and Tail Gas Pairing From Day Four — Recovery and Energy Balance
- Sulphur Block Technology Screening Matrix — Recommended Revamp Case
Applying Amine Treating and Sulfur Recovery Technology Selection After the Course
- Run a lean loading and reboiler duty check on one amine train and compare it with a formulated solvent case
- Lead a tail gas option review that scores current recovery against hydrogenation-amine and sub-dewpoint alternatives
Amine Treating and Sulfur Recovery Technology Selection Questions (FAQ)
What is amine treating and sulfur recovery technology selection and why does it matter now?
It is the structured comparison of solvents, Claus configurations and tail gas processes for a sour gas or refinery sulphur complex. Sourer feeds and tighter stack limits mean many plants must revisit these choices before revamps or capacity increases.
Which roles gain most from amine treating and sulfur recovery technology selection?
Process engineers, refinery engineers, senior Claus operators, technical support staff and environmental engineers gain most.
How does amine treating and sulfur recovery technology selection differ from an operations course?
It concentrates on choosing between process routes rather than daily unit control. It compares solvents, furnace layouts and tail gas technologies before a revamp or new train.
What do you bring back from amine treating and sulfur recovery technology selection?
You bring back a screening matrix for your own sulphur block. It ranks solvent, Claus and tail gas options against recovery, energy and lifecycle cost.
Amine Treating and Sulfur Recovery Technology Selection: The Way Forward
The sulphur block technology screening matrix first informs whether a revamp keeps the current solvent and Claus layout or moves to a new route. Process engineers and plant management use it to agree the design basis with licensors. After the first revamp study, revisit the weighting of energy against recovery as feed composition and emission limits shift.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 7 – 11 December 2026 in Milan. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Milan, Barcelona, Istanbul, Vienna, Dubai, Dar es Salaam, Amman, Rome, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 5 – 9 September 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.