Applied Petroleum Geology and Reservoir Petrophysics Training Course
Geologists, petrophysicists and reservoir engineers link petroleum systems to log evaluation and defend net pay with core-calibrated cut-offs.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Vienna. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Vienna
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Applied Petroleum Geology and Reservoir Petrophysics is a 1-week training course for geologists, petrophysicists and reservoir engineers who must turn rock, core and wireline evidence into a defensible net pay evaluation dossier. Development wells are drilled into thinner, more heterogeneous intervals, so cut-off choices now move reserves and completions. Jupiter Prime Training sets the subject against the geological story that explains where hydrocarbons sit.
Why Applied Petroleum Geology and Reservoir Petrophysics Matters Now
Two forces shape the subject today. Asset teams are asked to extend mature fields by targeting laminated and low-contrast pay. Partners and reserves auditors expect every porosity, water saturation and permeability figure to trace back to core calibration and stated cut-offs. An organisation that links depositional setting to log response perforates the right zones and books volumes it can defend; one that does not drills water, misses bypassed oil and revises reserves late. The course rests on the Petroleum Resources Management System (PRMS) for classifying volumes.
Who Gains Most from Applied Petroleum Geology and Reservoir Petrophysics
- Development geologists who map facies, correlate wells and pick reservoir tops
- Petrophysicists who build shale volume, porosity and saturation models
- Reservoir engineers who take net pay, porosity and saturation averages into volumetrics and simulation
- Operations geologists who choose logging suites, core points and pressure stations while drilling
- Exploration staff who assess charge, seal and trap risk
Subsurface asset teams gain most when a geologist, a petrophysicist and a reservoir engineer attend together.
Applied Petroleum Geology and Reservoir Petrophysics Capabilities
Participants leave able to connect a basin's charge history with the log curves.
- Assess source, migration, trap and seal elements of a petroleum system — prospect ranking for exploration committees
- Calculate shale volume and effective porosity from gamma ray, density and neutron logs — reservoir quality maps for development geologists
- Apply Archie and shaly-sand equations to estimate water saturation — perforation choices for completion engineers
- Build porosity–permeability transforms from routine core analysis — flow-unit definition for reservoir simulation
- Weigh cut-off scenarios for net reservoir and net pay — volumetric ranges for reserves auditors
- Communicate interpretation uncertainty to partners — appraisal well and coring decisions
Key Applied Petroleum Geology and Reservoir Petrophysics Terms
- Petroleum system — the source rock, migration path, reservoir, seal and trap that together allow hydrocarbons to accumulate.
- Effective porosity — the share of rock volume made of connected pores that can store and deliver fluids, excluding clay-bound water.
- Water saturation — the fraction of pore space filled with formation water; the remainder holds oil or gas.
- Archie equation — an empirical relation linking formation resistivity, porosity and brine resistivity to water saturation in clean rocks.
- Cut-off — a threshold of shale volume, porosity or saturation used to separate productive rock from non-productive rock.
- Net pay — the thickness of reservoir rock that passes all cut-offs and is expected to flow hydrocarbons at commercial rates.
Applied Petroleum Geology and Reservoir Petrophysics Day by Day
Day 1: Petroleum Systems and Basin Setting
- Source Rock Maturity and Kerogen Type — Charge Risk Before Appraisal
- Migration Pathways and Carrier Beds — Where Hydrocarbons Accumulate in the Trap
- Structural and Stratigraphic Traps — Prospect Geometry and Closure Confidence
- Seal Capacity and Fault Juxtaposition — Column Height the Trap Can Hold
- Petroleum Resources Management System (PRMS) Classes — How Volumes Are Reported
Day 2: Reservoir Rocks and Depositional Controls
- Clastic Depositional Environments — Sand Body Geometry and Connectivity
- Carbonate Facies and Diagenesis — Pore Type and Reservoir Quality Trends
- Core Description and Thin Sections — Calibrating Lithology on Logs
- Routine Core Analysis Porosity and Permeability — Rock Typing Inputs
- Capillary Pressure Curves — Transition Zone Height and Free Water Level
Day 3: Log Measurements and Porosity
- Gamma Ray and Spectral Gamma Logs — Shale Volume Estimation Method Choice
- Density and Neutron Crossplots — Lithology Identification and Gas Effect
- Sonic Porosity and Secondary Porosity Index — Fracture and Vug Recognition
- Borehole Environment Corrections — Log Quality Before Interpretation
- Effective Versus Total Porosity — Clay-Bound Water in Volumetrics
Day 4: Saturation, Permeability and Cut-Offs
- Resistivity Logs and Invasion Profiles — True Formation Resistivity Selection
- Archie Parameters a, m and n — Saturation Sensitivity in Clean Rock
- Simandoux and Indonesia Shaly-Sand Models — Low-Resistivity Pay Recognition
- Porosity–Permeability Transforms and Flow Units — Simulation Layering Choices
- Cut-Off Derivation from Core and Production Data — Net Reservoir Definition
Day 5: Practising the Net Pay Evaluation Dossier
- Integrated Well Correlation Panel — Applying Facies and Log Tops Together
- Multi-Well Porosity and Saturation Model — Applying Days 3 and 4 Methods
- Cut-Off Sensitivity Cases — Low, Base and High Net Pay Ranges
- Uncertainty Ranking with Tornado Charts — Coring and Logging Priorities
- Net Pay Evaluation Dossier — Interval Summary for Partner Review
Applying Applied Petroleum Geology and Reservoir Petrophysics After the Course
- Re-run the shaly-sand saturation model on one bypassed interval and present the revised net pay to the asset team
- Derive core-calibrated cut-offs for the main reservoir and record them in the field petrophysical reference sheet
Applied Petroleum Geology and Reservoir Petrophysics Questions (FAQ)
What is applied petroleum geology and reservoir petrophysics, and why does it matter now?
It is the linked practice of explaining where hydrocarbons accumulate and measuring how much rock can produce them. It matters now because mature fields depend on thin, low-contrast pay, and every cut-off choice changes reserves, well targets and completion plans.
Which roles gain most from applied petroleum geology and reservoir petrophysics?
Development geologists, petrophysicists and reservoir engineers gain most.
How does applied petroleum geology and reservoir petrophysics differ from a geology overview for non-specialists?
It works at practitioner depth with real log equations, core calibration and cut-off derivation. Overview courses stay conceptual; carbonate or shaly-sand specialist courses go deeper into one rock type.
What do you bring back from applied petroleum geology and reservoir petrophysics?
You bring back a net pay evaluation dossier for one interval, with documented cut-offs and low, base and high cases.
Applied Petroleum Geology and Reservoir Petrophysics: The Way Forward
The net pay evaluation dossier first informs which intervals to perforate in the next development well. Completion engineers, reservoir engineers and partner representatives use it to agree volumes and test plans. After first results, revisit the cut-offs and saturation exponent against production logs, since flowing evidence tests the model directly and early.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 23 – 27 November 2026 in Vienna. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Vienna, Abu Dhabi, Istanbul, Manama, Kuala Lumpur, New York, Milan, Madrid, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 27 – 31 December 2026, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.