Basic Drilling Technology Training Course
New drilling staff and non-drillers learn rig systems, bits, mud, casing, cementing and well control, and read a drilling plan with confidence.
This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 7 – 11 December 2026 in Dar es Salaam. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Dar es Salaam
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
December 2026
January 2027
February 2027
March 2027
April 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Basic Drilling Technology is a 1-week training course for new drilling staff, engineers and non-drilling professionals who need a working grasp of how oil and gas wells are drilled, and who leave with a well construction briefing pack for their own asset. Rising well complexity means more people must read drilling plans with confidence. Jupiter Prime Training delivers this Basic Drilling Technology course.
Why Basic Drilling Technology Matters Now
Three forces shape drilling today: deeper and more deviated wells, rig crews with fewer experienced hands, and partners who expect every hole section to be justified on cost and risk. An organisation that understands these basics catches stuck pipe, lost circulation and kick warning signs earlier. The course rests on widely used well construction practice: casing load cases, the two-barrier principle of well control and circulating hydraulics.
Who Gains Most from Basic Drilling Technology
- Graduate and junior engineers moving into drilling, completions or well engineering roles
- Rig-site trainees who will run the drill floor, mud pits or pipe handling
- Geologists and reservoir staff who set well targets and formation evaluation needs
- Supply chain and contracts staff who buy rigs, bits, mud and cementing services
- HSE and finance professionals who review well risk and authorisation for expenditure
Asset teams gain most when a geologist, a contracts lead and a new well engineer attend together and read the same drilling plan line by line.
Basic Drilling Technology Capabilities
Participants move from naming rig hardware to explaining why each hole section is drilled and cased as planned.
- Describe the hoisting, rotating, circulating and power systems of a rig — when briefing new crew or visitors
- Specify a drill string and bottom hole assembly for a given hole section — for the well engineer
- Select a bit type and mud system against formation behaviour — for the drilling supervisor
- Calculate hydrostatic pressure, mud weight and kill margins — for well control decisions
- Assess casing setting depths and cement placement — for the well integrity reviewer
- Read a drilling plan and flag its main risks — for partners and authorising managers
Key Basic Drilling Technology Terms
- Bottom hole assembly — The lower drill string holding the bit, collars, stabilisers and measurement tools.
- Mud weight — The density of drilling fluid, chosen to hold formation pressure back without fracturing the open hole.
- Casing shoe — The bottom end of a casing string, where formation strength is tested before drilling deeper.
- Kick — An unplanned influx of formation fluid into the wellbore.
- Blowout preventer — The stack of valves and rams on the wellhead that seals the well during a kick.
- Rate of penetration — The speed at which the bit deepens the hole, usually recorded in metres per hour.
Basic Drilling Technology Day by Day
Day 1: The Rig and the Well Life Cycle
- Well Life Cycle From Spud to Handover — Where Drilling Fits in Field Development
- Hoisting System and Derrick Loads — Rig Selection for Planned Hook Loads
- Rotary Table, Kelly and Top Drive — Choosing How Torque Reaches the Bit
- Mud Pumps, Pits and Solids Control — Sizing the Circulating System
- Onshore Versus Offshore Rig Types — Matching Rig Class to Water Depth
Day 2: Drill String, Bits and Hydraulics
- Drill Pipe, Heavyweight Pipe and Collars — Building Weight on Bit Safely
- Roller Cone Versus PDC Bits — Bit Choice for Soft and Hard Formations
- Bit Nozzles and Hydraulic Horsepower — Optimising Cuttings Removal at the Face
- Directional Tools and Survey Basics — Steering Toward the Geological Target
- Rate of Penetration Drivers — Balancing Speed Against Bit Wear
Day 3: Drilling Fluids, Casing and Cement
- Water-Based and Oil-Based Mud Systems — Fluid Choice for Shale Stability
- Mud Properties and Daily Mud Reports — Spotting Hole Cleaning Trouble Early
- Casing Strings and Setting Depths — Isolating Pressure Zones Section by Section
- Casing Load Cases for Burst and Collapse — Choosing Grade and Weight
- Casing and Cementing Job Design With Bond Logs — Confirming Zonal Isolation Behind Pipe
Day 4: Well Control and Drilling Problems
- Pore Pressure and Fracture Gradient — Setting the Safe Mud Window
- Kick Warning Signs and Shut-In Procedures — Acting Within the First Minutes
- Blowout Preventer Stack and Barriers — Keeping Two Independent Barriers in Place
- Stuck Pipe Mechanisms and Freeing Actions — Reducing Lost Rig Time
- Lost Circulation Materials and Losses — Protecting the Open Hole and Reservoir
Day 5: Practising the Well Construction Briefing Pack
- Reading a Drilling Plan Section by Section — Linking Plan to Risk
- Mud Window and Casing Scheme Review — Testing a Sample Well Design
- Daily Drilling Report Interpretation — Separating Productive and Lost Time
- Kick and Stuck Pipe Scenario Drill — Rehearsing the First Response
- Well Construction Briefing Pack — Summarising Hardware, Fluids, Casing and Risks
Applying Basic Drilling Technology After the Course
- Walk a current well plan with the drilling engineer and annotate its mud window, casing points and main hazards.
- Review a week of daily drilling reports and list the lost-time events with their likely causes.
Basic Drilling Technology Questions (FAQ)
What is Basic Drilling Technology and why does it matter now?
Basic Drilling Technology covers how a rig, drill string, bit, mud and casing work together to build a safe well. It matters now because more staff must read drilling plans and spot trouble early.
Which roles gain most from Basic Drilling Technology?
New well engineers, rig trainees, geologists, contracts staff and HSE or finance reviewers gain most. Each checks well decisions without deep drilling experience.
How does Basic Drilling Technology differ from a drilling performance course?
Basic Drilling Technology explains equipment, fluids, casing and well control from first principles. A drilling performance course assumes that knowledge and targets lost time across a campaign.
What do you bring back from Basic Drilling Technology?
You bring back a well construction briefing pack for a sample or real well, covering rig systems, bit and mud choices, casing scheme and key hazards.
Basic Drilling Technology: The Way Forward
The well construction briefing pack gives each participant a single view of hardware, fluids, casing and hazards for one well. Its first use is usually the pre-spud meeting. After that first well, revisit the mud window and casing points against what was actually drilled and refine the pack for the next one.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 7 – 11 December 2026 in Dar es Salaam. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Dar es Salaam, Kuala Lumpur, Vienna, Casablanca, Doha, Geneva, Singapore, Amman, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 24 – 28 January 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.