Basin Modelling and Thermal Maturity Simulation Training Course
Calibrated burial, heat flow and kerogen kinetics workflows for geologists and geochemists who must time hydrocarbon charge and rank prospects.
This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 6 – 10 December 2026 in Manama. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Manama
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
December 2026
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Basin Modelling and Thermal Maturity Simulation is a 1-week training course for petroleum geologists, geochemists and exploration geoscientists, built around one named work product: a Charge Risk and Maturity Map for a prospect area. Exploration portfolios now face tighter capital and more scrutiny of each well, so charge risk must be argued from calibrated burial and thermal models rather than analogue guesses. Jupiter Prime Training offers this course on basin modelling and thermal maturity simulation.
Why Basin Modelling and Thermal Maturity Simulation Matter Now
Exploration budgets favour fewer, better-risked wells; legacy basins hold remaining potential in deeper or unconventional plays where maturity windows are narrow; and the same thermal models now inform geothermal and carbon storage screening. A team that calibrates heat flow against measured temperatures and vitrinite reflectance can rank prospects on defensible charge timing. A team that skips calibration drills dry structures or condemns viable kitchens. The course rests on the petroleum system concept and first-order kinetic models of kerogen conversion, described in general terms.
Who Gains Most from Basin Modelling and Thermal Maturity Simulation
- Petroleum geologists building burial histories and prospect charge assessments
- Geochemists interpreting source rock pyrolysis, biomarkers and maturity data
- Exploration geophysicists supplying depth horizons and erosion estimates
- Play-fairway analysts ranking basin segments for licence rounds and farm-ins
- Geoscientists moving into geothermal or storage screening who need thermal history skills
An exploration asset group gains most when its geologists and geochemists attend together.
Basin Modelling and Thermal Maturity Simulation Capabilities
Participants move from single-well maturity plots to calibrated multi-well and map-based models that time generation and expulsion against trap formation.
- Build a one-dimensional burial history with decompaction, erosion and hiatus events — prospect charge timing
- Calibrate heat flow and thermal conductivity against borehole temperatures and vitrinite reflectance — model credibility for peer review
- Apply source rock kinetics to predict transformation ratio and generated volumes — kitchen ranking
- Assess expulsion efficiency and secondary migration pathways — trap-fill and seal risk
- Weigh uncertainty in palaeo-heat flow and erosion through sensitivity cases — chance-of-success estimates
- Communicate charge risk on maps and cross-sections — portfolio and drilling decisions
Key Basin Modelling and Thermal Maturity Simulation Terms
- Vitrinite Reflectance — light reflected by vitrinite particles, an indicator of the maximum temperature a rock has reached.
- Burial History — the depth of each layer through time, allowing for compaction, erosion and uplift.
- Heat Flow — the rate of heat moving upward through the crust.
- Transformation Ratio — the fraction of reactive kerogen already converted to hydrocarbons at a given time and depth.
- Kinetic Parameters — activation energies and frequency factors describing how fast a kerogen type cracks with temperature.
- Critical Moment — the time when generation, migration and accumulation are most active relative to trap formation.
Basin Modelling and Thermal Maturity Simulation Day by Day
Day 1: The Petroleum System in Time
- Petroleum System Elements and Events Chart — Framing the Charge Question
- Stratigraphic Input Tables and Lithology Mixing — Building a Defensible Column
- Porosity–Depth Compaction Curves — Decompacting Layers to True Thickness
- Erosion and Hiatus Estimation Methods — Restoring Missing Section at Unconformities
- One-Dimensional Burial History Plots — Reading Subsidence and Uplift Phases
Day 2: Thermal History and Calibration
- Basal Heat Flow Models for Rift and Passive Margins — Selecting a Thermal Scenario
- Thermal Conductivity and Radiogenic Heat — Setting Lithology Properties
- Borehole Temperature Correction Techniques — Removing Drilling Disturbance Effects
- Vitrinite Reflectance and Alternative Maturity Indicators — Choosing Calibration Data
- Calibration Matching and Misfit Diagnosis — Accepting or Revising the Thermal Model
Day 3: Source Rock Kinetics and Generation
- Pyrolysis Screening and Kerogen Typing — Characterising Source Richness and Quality
- Bulk and Compositional Kinetic Schemes — Predicting Oil Versus Gas Yields
- Transformation Ratio Maps — Delineating Active Kitchens Through Time
- Expulsion Thresholds and Retained Hydrocarbons — Linking Conventional and Unconventional Plays
- Secondary Cracking of Oil to Gas — Forecasting Phase at Deep Prospects
Day 4: Migration, Accumulation and Uncertainty
- Flowpath and Ray-Tracing Migration Methods — Mapping Drainage Areas to Traps
- Invasion Percolation and Darcy Flow Approaches — Choosing a Migration Model
- Seal Capacity and Fault Leakage Estimates — Judging Column Height Retention
- Sensitivity and Monte Carlo Scenario Runs — Bounding Charge Volume Uncertainty
- Thermal Model Reuse for Geothermal and Storage Screening — Extending Subsurface Insight
Day 5: Practising the Charge Risk and Maturity Map
- Multi-Well Calibration Exercise — Reconciling Temperature and Reflectance Datasets
- Kitchen-to-Trap Timing Case — Comparing Generation Against Structure Growth
- Charge Volume Estimate for a Prospect — Feeding Chance-of-Success Inputs
- Peer Assurance Checklist for Basin Models — Testing Assumptions Before Sign-Off
- Charge Risk and Maturity Map — Completing Kitchens, Pathways and Risk Segments
Applying Basin Modelling and Thermal Maturity Simulation After the Course
- Recalibrate one existing well model against corrected temperatures and vitrinite reflectance, and record how the maturity window shifts.
- Run a sensitivity case on erosion and palaeo-heat flow for a current prospect and present the charge timing range.
Basin Modelling and Thermal Maturity Simulation Questions (FAQ)
What is basin modelling and thermal maturity simulation and why does it matter now?
It reconstructs how sediments were buried and heated so that hydrocarbon generation, expulsion and migration can be timed against traps. With fewer, costlier wells, calibrated charge risk separates drillable prospects from dry structures.
Which roles gain most from basin modelling and thermal maturity simulation?
Petroleum geologists, geochemists and play-fairway analysts gain most, because each feeds and relies on charge risk estimates.
How does a basin modelling and thermal maturity simulation course differ from a general exploration course?
It concentrates on quantitative thermal and kinetic modelling rather than surveying the whole exploration cycle. You spend most time calibrating heat flow, applying kinetics and testing migration scenarios.
What do you bring back from basin modelling and thermal maturity simulation training?
You bring back a calibrated burial and thermal model workflow, sensitivity cases and a charge risk map structure for a real prospect area.
Basin Modelling and Thermal Maturity Simulation: The Way Forward
The Charge Risk and Maturity Map shows active kitchens, migration pathways and risk segments on one page. Its first use is ranking prospects before a drilling or licence decision, read by exploration managers and partners. Geoscientists update it as new wells add data. Revisit the heat flow assumptions after the next well result.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 6 – 10 December 2026 in Manama. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Manama, Dar es Salaam, Casablanca, Singapore, Paris, New York, Amman, Doha, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 7 – 11 March 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.