Blast Resistant Building Design for Oil and Gas Plants Training Course
Turn explosion scenarios into siting decisions, blast loads, member checks and door, glazing and HVAC specifications for occupied plant buildings.
This 1-week course has 25 dates from November 2026 to October 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Dar es Salaam. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Dar es Salaam
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Blast Resistant Building Design for Oil and Gas Plants is a 1-week training course for structural, civil and process safety engineers, built around one work product: a blast design basis for a named plant building. Vapour cloud explosions keep showing that occupied buildings placed too close to hazards turn a process event into a fatality event. Jupiter Prime Training offers this subject to refining, gas processing and petrochemical sites.
Why Blast Resistant Building Design for Oil and Gas Plants Matters Now
Plant expansions today squeeze new process units closer to existing control rooms and laboratories. Owners now expect occupied buildings to be justified by an explosion study, not by tradition or spacing tables alone, and insurers ask for the same evidence in writing. Getting it right protects people and keeps control available; getting it wrong leaves staff in structures that collapse or glaze inward. The course rests on the single-degree-of-freedom (SDOF) model and pressure-impulse (P-I) diagrams as its core analysis methods.
Who Gains Most from Blast Resistant Building Design for Oil and Gas Plants
- Structural engineers who size frames, walls and connections for blast loads
- Civil engineers who lay out plant buildings and their foundations
- Process safety engineers who define explosion scenarios and building occupancy
- Building services engineers who specify doors, glazing and ventilation intakes
- Project engineers who own building siting decisions on expansions
A project or site engineering unit gains most when its structural and process safety members attend together, since the blast design basis joins their two disciplines.
Blast Resistant Building Design for Oil and Gas Plants Capabilities
Participants move from an explosion scenario to walls, roofs and openings that survive it.
- Calculate side-on and reflected overpressure and impulse at a building face — structural designers
- Assess building siting against explosion, fire and toxic hazards — plant layout decisions
- Apply SDOF models and P-I diagrams to wall and roof members — design approval
- Specify blast doors, glazing and HVAC dampers to match the load — procurement
- Weigh upgrade, relocation or occupancy reduction for existing buildings — site management
- Communicate response limits and damage levels to non-structural reviewers — safety committees
Key Blast Resistant Building Design for Oil and Gas Plants Terms
- Overpressure — the pressure above atmospheric produced by an explosion blast wave as it reaches a structure.
- Impulse — the area under the pressure-time curve, governing how much momentum a blast transfers to a building element.
- Building siting study — an assessment of explosion, fire and toxic hazards at each occupied building location on a plant.
- Single-degree-of-freedom model — a simplified dynamic model treating a wall or beam as one mass on a spring to predict its response.
- Response limit — the allowable deflection or rotation of a member for a chosen damage level, such as low or medium.
- Pressure-impulse diagram — a chart showing which combinations of pressure and impulse a member can withstand.
Blast Resistant Building Design for Oil and Gas Plants Day by Day
Day 1: Explosion Hazards and Occupied Buildings
- Vapour Cloud Explosion Case Histories — Why Buildings Became Fatality Points
- Explosion Scenario Selection — Credible Cloud Size and Congestion
- Building Siting Study Method — Occupancy, Function and Location Criteria
- Fire and Toxic Ingress Screening — Hazards Beyond Overpressure
- Owner Performance Criteria — Choosing Acceptable Damage Levels
Day 2: Blast Loads on Structures
- Blast Wave Parameters — Side-On, Reflected and Dynamic Pressure
- Load Shapes on Front, Side, Roof and Rear Walls — Member Design Inputs
- Clearing and Shielding Effects — Adjusting Loads for Geometry
- Fragment and Debris Hazards — Protection of Openings
- Load Calculation Spreadsheets — Checking Consultant Results
Day 3: Dynamic Structural Response
- SDOF Model Set-Up for Walls and Beams — Predicting Peak Deflection
- P-I Diagrams — Rapid Screening of Member Capacity
- Response Limits for Steel, Concrete and Masonry — Damage Level Choice
- Connection and Rebound Design — Avoiding Brittle Failure
- Foundation Reactions Under Blast — Sliding and Overturning Checks
Day 4: Building Envelope and Existing Assets
- Blast Doors and Frames — Specification and Factory Testing
- Blast Resistant Glazing and Window Removal — Inward Hazard Control
- HVAC Intakes, Dampers and Gas Detection — Keeping Occupants Sheltered
- Upgrade Options for Existing Buildings — Strengthening Versus Relocation
- Portable and Temporary Buildings — Turnaround Placement Rules
Day 5: Practising the Blast Design Basis
- Siting Screening for a Sample Control Room — Applying Day 1
- Wall Load Calculation for the Chosen Building — Applying Day 2
- SDOF Check and Envelope Selection — Applying Days 3 and 4
- Peer Review Against Owner Criteria — Testing the Assumptions
- Blast Design Basis — Completed for the Named Plant Building
Applying Blast Resistant Building Design for Oil and Gas Plants After the Course
- Screen each occupied building on one plant against current explosion scenarios.
- Check one existing control room wall with an SDOF model and record the damage level reached.
Blast Resistant Building Design for Oil and Gas Plants Questions (FAQ)
What is blast resistant building design for oil and gas plants and why does it matter now?
It is the siting, loading and structural design of occupied plant buildings so they protect people during an explosion. Plant expansions and stricter owner criteria now demand that protection.
Which roles gain most from blast resistant building design for oil and gas plants?
Structural, civil and process safety engineers gain most, together with building services and project engineers who specify openings and decide where buildings go.
How does blast resistant building design for oil and gas plants differ from a general structural dynamics course?
It applies dynamics to one plant problem from scenario to specification. Rather than general theory, you work through siting, blast loads, member checks, doors, glazing and HVAC for plant buildings.
What do you bring back from blast resistant building design for oil and gas plants training?
You bring back a drafted blast design basis for one building, with scenarios, loads, damage levels, member checks and envelope specifications.
Blast Resistant Building Design for Oil and Gas Plants: The Way Forward
The blast design basis first informs whether a building is strengthened, relocated or reduced in occupancy. Structural designers, process safety leads and project managers use it to agree scope and budget. After its first use, revisit whether the chosen explosion scenarios still match plant layout and congestion, since later expansions often change both.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 23 – 27 November 2026 in Dar es Salaam. It is one of 25 dates scheduled up to October 2027.
Where is this course held?
In a classroom in 24 cities: Dar es Salaam, Barcelona, Dubai, Doha, Casablanca, Istanbul, Amman, Abu Dhabi, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 4 – 8 April 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.