Bulk Solids Handling for Sulphur and Petcoke Training Course
Keep sulphur, petcoke and catalyst lines flowing: hopper and silo design, chute layout, dust control and blockage prevention for plant engineers.
This 1-week course has 25 dates from November 2026 to October 2027 in 24 cities and live online. The next session runs 22 – 26 November 2026 in Manama. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Manama
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Bulk Solids Handling for Sulphur and Petcoke is a 1-week training course for plant engineers and operations supervisors, built around a solids flow improvement map for one handling line. Sulphur recovery output, coker throughput and catalyst change-outs all depend on conveyors, hoppers and silos that keep moving without blockages, dust clouds or fires. Jupiter Prime Training presents this Bulk Solids Handling for Sulphur and Petcoke course.
Why Bulk Solids Handling for Sulphur and Petcoke Matters Now
Three pressures shape solids handling at refineries and gas plants today: rising sulphur volumes from sour gas processing, tighter expectations from neighbours and inspectors on fugitive dust, and maintenance crews stretched across ageing conveyors and stackers. A line that flows reliably keeps coker drums and recovery units on stream and loads ships or trucks on time. A line handled poorly causes arching hoppers, ratholing silos, belt fires and combustible dust incidents that stop production. The course rests on recognised bulk solids flow testing, hopper design theory and dust explosion prevention practice, described in general terms.
Who Gains Most from Bulk Solids Handling for Sulphur and Petcoke
- Engineers responsible for conveyor, hopper and silo performance on sulphur or petcoke lines
- Supervisors running daily loading, reclaiming and stockpile operations
- Reliability staff tracking belt, idler and chute failures
- Specialists handling catalyst loading and unloading during turnarounds
- Environmental and safety staff controlling dust and ignition sources
A refinery, gas plant or export terminal gains most when its process engineer, handling supervisor and maintenance planner attend together and agree one list of flow problems to fix.
Bulk Solids Handling for Sulphur and Petcoke Capabilities
Participants connect the behaviour of granules and powders to the equipment that stores, feeds and transfers them.
- Assess flow properties such as cohesion, wall friction and bulk density — the hopper redesign decision
- Specify conveyor belt width, speed and idler spacing — the capacity upgrade case
- Design transfer chute geometry to cut spillage and wear — the maintenance planner
- Apply mass flow and funnel flow criteria to silos — the storage engineer
- Build dust control and ignition prevention measures — the site safety committee
- Calculate the downtime cost of recurring blockages — the operations manager's priorities
Key Bulk Solids Handling for Sulphur and Petcoke Terms
- Mass flow — a silo discharge pattern where all material moves together, avoiding stagnant zones.
- Funnel flow — discharge through a central channel while material near the walls stays still.
- Arching — a stable bridge of material forming over a hopper outlet and stopping discharge.
- Ratholing — an empty vertical channel through a silo surrounded by material that will not move.
- Angle of repose — the steepest slope a free-standing pile of granular material holds without sliding.
- Combustible dust — fine particles that can ignite or explode when dispersed in air near an ignition source.
Bulk Solids Handling for Sulphur and Petcoke Day by Day
Day 1: Solids in Refining and Gas Processing
- Sulphur Prilling, Granulation and Pastilles — Product Form Selection
- Petcoke Grades and Moisture — Handling and Export Choices
- Catalyst Loading and Unloading Methods — Turnaround Duration
- Handling Line Mapping From Unit to Jetty — Bottleneck Location
- Failure History Review — Where Downtime Really Comes From
Day 2: Flow Properties of Powders and Granules
- Shear Cell Testing — Cohesive Strength and Flow Function
- Wall Friction Measurement — Liner Material Selection
- Bulk Density and Compressibility — Storage Volume Estimates
- Particle Size and Moisture Effects — Caking and Degradation Risk
- Abrasiveness and Corrosion Tests — Wear Part Choices
Day 3: Hoppers, Silos and Conveyors
- Mass Flow Versus Funnel Flow Design — Silo Geometry Choice
- Hopper Outlet Sizing — Arching and Ratholing Prevention
- Belt Conveyor Capacity and Tension — Drive and Belt Selection
- Feeders and Flow Aids — Screw, Belt, Vibratory or Air Options
- Stockpile and Reclaim Systems — Blending and Inventory Control
Day 4: Chutes, Dust and Reliability
- Transfer Chute Trajectory Layout — Spillage and Impact Wear
- Dust Suppression and Extraction — Enclosure, Sprays and Filters
- Sulphur Dust Ignition Prevention — Static, Hot Work and Housekeeping
- Belt Tracking, Idler and Pulley Inspection — Failure Prevention
- Condition Monitoring of Handling Equipment — Maintenance Intervals
Day 5: Practising the Solids Flow Improvement Map
- Flow Test Results Applied to a Petcoke Silo — Retrofit Options
- Chute Redesign for a Sulphur Transfer Point — Spillage Reduction
- Dust Control Audit of a Loading Area — Corrective Measures
- Blockage Cost Ranking — Investment Priorities
- Solids Flow Improvement Map — Action Owners and Sequence
Applying Bulk Solids Handling for Sulphur and Petcoke After the Course
- Walk one handling line and log every arching, ratholing and spillage point.
- Commission flow property tests on the material causing the most blockages.
Bulk Solids Handling for Sulphur and Petcoke Questions (FAQ)
What is bulk solids handling for sulphur and petcoke, and why does it matter now?
It is the engineering of how granular sulphur, petcoke and catalysts are stored, fed and conveyed. It matters now because sulphur and coke volumes are rising and blockages, dust and fires halt upstream units.
Which roles gain most from bulk solids handling for sulphur and petcoke skills?
Plant engineers and operations supervisors on handling lines gain most. Reliability, turnaround and environmental staff also use the methods.
How does bulk solids handling for sulphur and petcoke differ from general mechanical maintenance training?
It starts from material behaviour, flow testing and hopper theory rather than generic repair skills. Mechanical maintenance courses fix machines; this one explains why solids stop flowing and how equipment should be shaped.
What do you bring back from bulk solids handling for sulphur and petcoke training?
You bring back a solids flow improvement map for one handling line, listing problem points, test needs, design changes, dust measures and the order in which to tackle them.
Bulk Solids Handling for Sulphur and Petcoke: The Way Forward
The solids flow improvement map gives engineers, supervisors and maintenance planners one view of where a sulphur, petcoke or catalyst line loses time. Its first use is choosing which hopper, chute or conveyor to fix before the next turnaround. After that change runs for a season, revisit flow test data and blockage records to confirm the cause was truly removed.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 22 – 26 November 2026 in Manama. It is one of 25 dates scheduled up to October 2027.
Where is this course held?
In a classroom in 24 cities: Manama, Dar es Salaam, Abu Dhabi, Cairo, New York, Istanbul, Kuala Lumpur, London, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 20 – 24 December 2026, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.