Catalytic Chemical Processes in Refining Technology Training Course
Read reactor data, forecast catalyst life, close hydrogen balances and set severity on hydrotreaters, reformers and crackers for refinery engineers.
This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 6 – 10 December 2026 in Doha. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Doha
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
August 2027
September 2027
October 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Catalytic Chemical Processes in Refining Technology is a 1-week training course for refinery and petrochemical engineers who run hydrotreaters, reformers, fluid catalytic crackers and hydrocrackers, and it ends with a Catalyst Cycle and Hydrogen Balance Brief for one conversion unit. Tighter sulphur limits, heavier crude diets and shrinking margins put catalyst choices and hydrogen use at the centre of refinery economics. Jupiter Prime Training delivers this course on catalytic chemical processes in refining technology.
Why Catalytic Chemical Processes Matter Now
Three forces shape catalytic chemical processes in refining today. Fuel sulphur and aromatics limits keep tightening, so hydrotreater severity and catalyst life trade directly against each other. Crude diets grow heavier and more variable, loading metals and nitrogen onto conversion catalysts faster than run plans assume. Energy transition pressure squeezes refinery margins, and hydrogen is now one of the most expensive streams on site. Refineries that read their reactors well stretch cycles; others face early shutdowns and costly hydrogen imports. Examples come from fuels refining and from integrated petrochemical complexes.
Who Gains Most from Catalytic Chemical Processes
- Engineers who monitor reactor temperature, pressure drop and conversion on hydroprocessing units
- Technologists responsible for catalyst selection, loading and end-of-run decisions
- Process engineers who close mass, energy and hydrogen balances around conversion units
- Planners who link unit yields to blending and product specifications
- Petrochemical engineers who receive refinery feedstocks
Technical services groups that send unit engineers and catalyst technologists together gain most.
Catalytic Chemical Processes Capabilities
The outcomes centre on reading reactor behaviour and turning it into run-length, hydrogen and yield decisions.
- Calculate weighted average bed temperature and deactivation rate from reactor data — end-of-run forecasts for turnaround planning
- Build mass, energy and hydrogen balances around a conversion unit — decisions on hydrogen supply and purge
- Weigh severity against catalyst life on hydrotreaters and reformers — the sulphur and octane targets agreed with planning
- Assess fluid catalytic cracking heat balance and catalyst circulation — conversion and regenerator limits
- Apply blending rules for octane, vapour pressure and sulphur — product release and giveaway
- Specify catalyst change-out criteria with vendors — procurement and turnaround scope
Key Catalytic Chemical Processes Terms
- Weighted average bed temperature — A single temperature that represents catalyst activity across all beds, used to track deactivation.
- Liquid hourly space velocity — Feed volume per hour divided by catalyst volume, a measure of how hard the catalyst works.
- Hydrogen partial pressure — The share of reactor pressure due to hydrogen, which drives desulphurisation and slows coke laydown.
- Catalyst deactivation — Loss of activity through coke, metals or sintering, offset by raising reactor temperature until end of run.
- Catalyst to oil ratio — Mass of circulating cracking catalyst per mass of feed, which sets conversion and coke make in the cracker.
- Octane barrel — Product volume multiplied by octane number, used to compare reformer and blending options on value.
Catalytic Chemical Processes Day by Day
Day 1: Feeds, Reactions and Refinery Configuration
- Crude Distillation Cuts As Conversion Feed — Matching Feed Quality To Each Reactor
- Hydrocarbon Reaction Families — Cracking, Saturation, Isomerisation And Dehydrogenation Choices
- Heterogeneous Catalyst Structure — Active Metals, Supports And Acid Sites
- Feed Contaminants Nitrogen, Metals And Asphaltenes — Poisoning Risk By Unit
- Refinery Block Flow And Unit Integration — Where Each Catalytic Unit Adds Margin
Day 2: Hydroprocessing Units
- Hydrotreating Kinetics And Severity — Meeting Sulphur Limits Without Shortening Cycle
- Hydrocracking Conversion And Selectivity — Middle Distillate Versus Naphtha Yield
- Reactor Temperature Profiles And Quench — Controlling Exotherms And Hot Spots
- Pressure Drop Growth And Bed Grading — Avoiding Premature Shutdown
- Catalyst Sulphiding And Start-Up Procedures — Protecting Initial Activity
Day 3: Reforming, Cracking and Light-End Upgrading
- Catalytic Reforming Reactions And Chloride Balance — Octane Against Coke And Yield
- Continuous And Semi-Regenerative Reformers — Regeneration Strategy Selection
- Fluid Catalytic Cracking Heat Balance — Riser Temperature And Regenerator Limits
- Catalyst Additives And Fresh Catalyst Make-Up — Propylene And Bottoms Upgrading
- Isomerisation And Alkylation Units — Light Naphtha And Olefin Value
Day 4: Balances, Blending and Margin
- Unit Mass And Energy Balance Closure — Detecting Meter And Yield Errors
- Refinery Hydrogen Network And Pinch — Supply, Recovery And Purge Choices
- Gasoline And Diesel Blending Rules — Octane, Vapour Pressure And Sulphur Giveaway
- Catalyst Cycle Economics — Change-Out Timing Against Lost Production
- Margin-Driven Severity Choices — Responding To Crack Spread Swings
Day 5: Practising the Catalyst Cycle and Hydrogen Balance Brief
- Deactivation Trend From Hydrotreater Data — Forecasting End Of Run
- Hydrogen Balance Around A Hydrocracker Case — Purge And Make-Up Decisions
- Reformer Severity And Blending Scenario — Octane Barrel Comparison
- Presenting Catalyst Options To Planning And Turnaround Leads — Agreeing Next Cycle
- Catalyst Cycle And Hydrogen Balance Brief — Trends, Balances, Options And Recommendation
Applying Catalytic Chemical Processes After the Course
- Trend weighted average bed temperature on one hydroprocessing unit and issue an end-of-run forecast to planning.
- Close a hydrogen balance around one conversion unit and list purge reduction options.
Catalytic Chemical Processes Questions (FAQ)
What are catalytic chemical processes in refining technology and why do they matter now?
They are reactor units, such as hydrotreating, reforming and catalytic cracking, that convert crude cuts into fuels. They matter now because sulphur limits, heavier crudes and costly hydrogen make catalyst decisions central to refinery margin.
Which roles gain most from catalytic chemical processes training?
Refinery unit engineers, catalyst technologists and petrochemical engineers who receive refinery streams gain most, especially when they share responsibility for reactor run length and hydrogen use.
How does a catalytic chemical processes course differ from a process basics course for operators?
It works at engineer level on reaction chemistry, catalyst life and balances. An operator basics course covers equipment and the processing train; this one covers reactor kinetics, deactivation, hydrogen networks and margin-driven severity choices.
What do you bring back from catalytic chemical processes training?
You bring back a catalyst cycle and hydrogen balance brief for one unit, with deactivation trends, closed balances and severity options ready to present to planning.
Catalytic Chemical Processes: The Way Forward
The Catalyst Cycle and Hydrogen Balance Brief first informs when to change out catalyst and how hard to run the unit until then. Unit engineers maintain it, planners use it to set yields and turnaround leads to fix scope. After its first use, revisit whether hydrogen recovery or a different catalyst system offers more margin than extra severity.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 6 – 10 December 2026 in Doha. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Doha, Milan, New York, Amsterdam, Istanbul, Kuala Lumpur, Abu Dhabi, London, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 28 March – 1 April 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.