Clean Fuel Standards and Quality Testing Training Course
Link every fuel property to its test method, blend and controlling unit, and release gasoline, diesel, jet and marine fuels on specification.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Geneva. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Geneva
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
May 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Clean Fuel Standards and Quality Testing is a 1-week training course for refinery engineers and fuel quality specialists who certify gasoline, diesel, jet and marine fuels for release, and it ends with a Fuel Specification Compliance Matrix for one product slate. Emissions-driven limits on sulphur, aromatics and vapour pressure keep tightening, and one off-spec cargo now carries legal and commercial consequences. Jupiter Prime Training delivers this course on clean fuel standards and quality testing.
Why Clean Fuel Standards Matter Now
Three groups shape clean fuel standards today. Environmental authorities lower sulphur and aromatics limits and widen the list of measured properties. Engine and vehicle makers demand cleaner, more stable fuels to protect after-treatment systems. Buyers and traders reject cargoes on a single failed property and pass claims back to the refinery. Producers that test, blend and document well release product quickly with little quality giveaway; those that do not face reblending, demurrage and lost customers. Examples come from road transport fuels and from marine and aviation supply.
Who Gains Most from Clean Fuel Standards
- Laboratory specialists who run and validate fuel test methods
- Blending engineers who set component recipes against product limits
- Process engineers responsible for desulphurisation, isomerisation and alkylation units
- Quality staff who sign certificates of quality and release cargoes
- Terminal staff who protect fuel integrity after the gate
Product quality groups that send laboratory, blending and process staff together gain most.
Clean Fuel Standards Capabilities
The outcomes link each specification property to the unit, the blend and the test that controls it.
- Map each fuel specification property to its test method and controlling unit — release responsibility across departments
- Apply repeatability and reproducibility limits to borderline results — release or retest decisions
- Calculate blend recipes that meet octane, vapour pressure and sulphur with minimum giveaway — the blending schedule
- Assess how desulphurisation, isomerisation and alkylation severity shift product properties — targets agreed with unit engineers
- Design sampling and retention plans for tanks, ships and pipelines — dispute handling with buyers
- Specify actions for biofuel blending, stability and cold-flow risks — supply to seasonal and export markets
Key Clean Fuel Standards Terms
- Research octane number — A laboratory engine rating of gasoline knock resistance under mild conditions, used with motor octane to set grade.
- Cetane index — A calculated estimate of diesel ignition quality from density and distillation data, used when engine testing is unavailable.
- Reid vapour pressure — Gasoline vapour pressure at a fixed temperature, limited seasonally to control evaporative emissions.
- Reproducibility — The largest difference expected between results from two laboratories on the same sample, used to settle quality disputes.
- Cold filter plugging point — The lowest temperature at which diesel still passes a standard filter, setting winter suitability.
- Certificate of quality — The signed record of tested properties against specification that accompanies each released batch or cargo.
Clean Fuel Standards Day by Day
Day 1: Specification Landscape and Emissions Drivers
- Gasoline, Diesel, Jet And Marine Fuel Property Sets — Which Limits Bind Each Product
- Emissions Drivers Behind Sulphur And Aromatics Limits — Future Specification Planning
- Engine And After-Treatment Sensitivities — Why Fuel Properties Affect Vehicle Warranty
- National Versus Export Grade Differences — Product Slate And Market Choices
- Specification Property To Unit Map — Who Controls Each Property
Day 2: Process Routes to Low-Sulphur Fuels
- Hydrodesulphurisation Depth And Hydrogen Demand — Meeting Ultra-Low Sulphur Diesel Limits
- Naphtha Isomerisation — Raising Octane While Cutting Benzene
- Alkylation For Clean Gasoline Components — Octane Without Aromatics Or Olefins
- Cracked Gasoline Post-Treatment — Sulphur Removal With Minimum Octane Loss
- Jet Fuel Sweetening And Treating — Mercaptan And Acidity Limits
Day 3: Fuel Quality Testing in the Laboratory
- Sulphur Measurement By X-Ray Fluorescence And Ultraviolet Methods — Choosing The Release Test
- Distillation Curve, Density And Flash Point — Volatility And Handling Safety
- Octane And Cetane Determination — Engine Ratings Versus Calculated Indices
- Cold Flow And Oxidation Stability Tests — Seasonal And Storage Suitability
- Repeatability, Reproducibility And Control Charts — Trusting Borderline Results
Day 4: Blending, Release and Product Integrity
- Blending Indices For Octane And Vapour Pressure — Recipe Calculation With Non-Linear Behaviour
- Quality Giveaway Measurement — Value Lost By Over-Specifying
- Biofuel Component Blending — Water Tolerance, Stability And Labelling
- Sampling, Retention And Certificate Of Quality Practice — Cargo Release And Claims
- Contamination Control In Tanks And Pipelines — Protecting Quality After The Gate
Day 5: Practising the Fuel Specification Compliance Matrix
- Diesel Sulphur And Cold-Flow Case — Unit Severity Versus Additive Choice
- Gasoline Blend Recipe Exercise — Octane And Vapour Pressure Within Limits
- Borderline Result Dispute Simulation — Applying Reproducibility To A Cargo Claim
- Presenting Quality Risks To Production And Commercial Leads — Agreeing Release Rules
- Fuel Specification Compliance Matrix — Properties, Tests, Controlling Units And Release Rules
Applying Clean Fuel Standards After the Course
- Build a property-to-unit map for one product and agree owners for each limit with production.
- Measure quality giveaway on the last ten gasoline or diesel batches and propose recipe changes.
Clean Fuel Standards Questions (FAQ)
What are clean fuel standards and quality testing, and why do they matter now?
They are the property limits fuels must meet and the laboratory methods that prove it. They matter now because sulphur, aromatics and volatility limits keep tightening, and buyers reject cargoes on a single failed result.
Which roles gain most from clean fuel standards and quality testing training?
Laboratory specialists, blending engineers, process engineers on treating units and quality staff who release product gain most, especially when they share responsibility for one product slate.
How does a clean fuel standards course differ from a hydroprocessing technology course?
It starts from the specification and the test, not the reactor. A hydroprocessing course focuses on catalysts and unit operation; this one links every fuel property to its test method, blend and release decision.
What do you bring back from clean fuel standards and quality testing training?
You bring back a compliance matrix for one product slate, linking each property to its test, controlling unit, owner and release rule.
Clean Fuel Standards: The Way Forward
The Fuel Specification Compliance Matrix first informs who signs off each property before a batch is released. Laboratory staff use it to plan testing, blenders to set recipes and commercial staff to answer buyer claims. After its first use, revisit how coming changes in sulphur, aromatics or biofuel content will shift unit targets and testing load.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 23 – 27 November 2026 in Geneva. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Geneva, Munich, Dubai, Barcelona, Singapore, New York, Manama, Cairo, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 27 June – 1 July 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.