CNG and LNG Station Build and Inspection Training Course
Plan, build and inspect compressed and liquefied gas fuelling stations, from compressor and tank layout to zoning, commissioning and periodic tests.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Casablanca. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Casablanca
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
September 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
CNG and LNG Station Build and Inspection is a 1-week training course for station engineers, inspectors and fuel retail operators, built around a station inspection and commissioning dossier. Natural gas fuelling for fleets, buses and heavy trucks is expanding, and each new forecourt adds compressors, cryogenic tanks and high-pressure dispensers that must be laid out, proven and tested before vehicles fill. Jupiter Prime Training delivers this CNG and LNG Station Build and Inspection course.
Why CNG and LNG Station Build and Inspection Matters Now
Three forces shape gas fuelling stations today: fleet operators switching buses and haulage trucks to natural gas, insurers asking for documented hazard reviews, and equipment suppliers offering packaged compressor and vaporiser skids that still need site integration. A station built and inspected well fills vehicles quickly, keeps venting and boil-off low and passes audits without delay. A station handled badly risks gas releases near public forecourts, long shutdowns and rework on pipework already buried. The course rests on recognised practice for hazardous area classification, pressure equipment inspection and cryogenic storage, described in general terms.
Who Gains Most from CNG and LNG Station Build and Inspection
- Engineers responsible for station layout, compressor selection and gas pipework routing
- Inspectors who verify pressure vessels, cascades and dispensers before and after start-up
- Operators running daily forecourt fuelling and handling alarms or leaks
- Maintenance leads planning periodic testing of relief valves, hoses and detectors
- Project coordinators handing a completed station from contractor to owner
A fuel retail or fleet depot group gains most when its design engineer, site inspector and forecourt supervisor attend together and agree one acceptance route.
CNG and LNG Station Build and Inspection Capabilities
Participants move from reading a station drawing to signing off compressed and liquefied gas equipment that is ready for public fuelling.
- Specify CNG compressor, storage cascade and dispenser layout — the site owner's capacity decision
- Assess LNG tank, pump and vaporiser arrangements — the cryogenic safety reviewer
- Apply hazardous area zoning to forecourt equipment — the electrical installation contractor
- Build commissioning sequences with pressure and leak tests — the handover acceptance panel
- Design inspection checklists for each equipment class — the station operator's daily routine
- Calculate periodic testing intervals for relief and detection devices — the maintenance budget holder
Key CNG and LNG Station Build and Inspection Terms
- Storage cascade — high-pressure cylinders split into pressure stages so dispensers fill vehicles quickly.
- Boil-off gas — vapour formed as stored LNG absorbs heat.
- Ambient vaporiser — a finned exchanger that warms LNG into gas using surrounding air.
- Hazardous area zone — a mapped space where flammable gas may be present, limiting electrical equipment.
- Breakaway coupling — a hose fitting that separates and seals if a vehicle drives off connected.
- Pressure relief valve — a device that opens at a set pressure to protect vessels and pipework from overpressure.
CNG and LNG Station Build and Inspection Day by Day
Day 1: Gas Fuelling Station Landscape
- Fleet Fuelling Demand Profiles — Station Size and Throughput Choice
- CNG Versus LNG Supply Routes — Pipeline or Trucked Delivery
- Forecourt Site Layout Principles — Separation Distances and Traffic Flow
- Station Equipment Inventory — Packaged Skid or Site-Built Plant
- Project Stage Gates — Design Freeze and Contractor Selection
Day 2: Compressed Gas Equipment
- Reciprocating Compressor Sizing — Fill Time and Running Hours
- Gas Drying and Filtration Units — Moisture Limits for Vehicle Cylinders
- Storage Cascade Priority Panels — Fast Fill Versus Slow Fill
- High-Pressure Dispenser Metering — Accuracy and Temperature Compensation
- Pipework and Fitting Selection — Leak Points and Access
Day 3: Liquefied Gas Systems
- Vacuum-Insulated LNG Tanks — Holding Time and Boil-Off Control
- Submerged Cryogenic Pumps — Priming, Cooldown and Trip Logic
- Ambient and Heated Vaporisers — LCNG Supply From Liquid Storage
- LNG Dispenser Nozzles and Vent Return — Driver Exposure
- Tanker Offloading Bays — Bonding, Hoses and Spill Containment
Day 4: Zoning, Commissioning and Testing
- Hazardous Area Classification Drawings — Electrical Equipment Selection
- Gas and Flame Detection Coverage — Emergency Shutdown Triggers
- Pneumatic and Hydrostatic Pressure Tests — Acceptance of Pipework
- Commissioning Sequence and Purging — First Gas Introduction
- Periodic Testing Schedules — Relief Valves, Hoses and Detectors
Day 5: Practising the Station Inspection and Commissioning Dossier
- Layout Review of a Combined CNG and LNG Forecourt — Design Gaps
- Equipment Inspection Checklist Walkthrough — Cascade, Tank and Dispenser Findings
- Zoning Drawing Mark-Up — Corrective Actions Before Energisation
- Defect Ranking and Punch Lists — Handover Readiness
- Station Inspection and Commissioning Dossier — Final Sign-Off Pack
Applying CNG and LNG Station Build and Inspection After the Course
- Run a checklist inspection of one existing dispenser island, cascade or LNG tank.
- Redraw the hazardous area zoning for one forecourt against installed equipment.
CNG and LNG Station Build and Inspection Questions (FAQ)
What is CNG and LNG station build and inspection, and why does it matter now?
It is the design, construction, commissioning and checking of natural gas fuelling stations. It matters now because more fleets run on natural gas, and each station combines high pressure and cryogenic hazards next to public vehicles.
Which roles gain most from CNG and LNG station build and inspection skills?
Station engineers, equipment inspectors and forecourt operators gain most. Maintenance leads and handover coordinators also apply the methods.
How does CNG and LNG station build and inspection differ from forecourt management training?
It focuses on equipment, pressure, cryogenics and hazard zoning rather than sales, staffing or wet stock. Forecourt management courses run an operating station; this one gets the gas equipment built, proven and safe first.
What do you bring back from CNG and LNG station build and inspection training?
You bring back a station inspection and commissioning dossier: layout review notes, equipment checklists, zoning mark-ups, test records and a ranked punch list that a site team can use at the next handover or audit.
CNG and LNG Station Build and Inspection: The Way Forward
The station inspection and commissioning dossier gives engineers, inspectors and operators one shared record of how a gas fuelling station was built and proven. Its first use is the decision to energise and admit vehicles. After the first periodic test cycle, revisit the testing intervals and zoning drawings to reflect real compressor hours, boil-off behaviour and the defects actually found on site.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 23 – 27 November 2026 in Casablanca. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Casablanca, Munich, New York, Doha, Amman, Manama, Dubai, Singapore, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 11 – 15 July 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.