Skip to content

Construction HSE Hazards in Oil and Gas Projects Training Course

Control lifting, trenching, height, hot work and confined space hazards beside live hydrocarbon plant with permits, SIMOPS and contractor checks.

This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 29 November – 3 December 2026 in Amman. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Amman
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

November 2026

December 2026

January 2027

February 2027

March 2027

May 2027

June 2027

July 2027

August 2027

September 2027

October 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Construction HSE Hazards in Oil and Gas Projects is a 1-week training course for construction supervisors, HSE advisers and site managers who must build a Site Hazard Control Plan for lifting, excavation, height work, hot work and confined spaces near live plant. Brownfield expansions and tie-ins now put scaffolders, riggers and welders beside pressurised hydrocarbons. The course is delivered by Jupiter Prime Training.

Why Construction HSE Hazards in Oil and Gas Projects Matter Now

Three forces shape construction safety on hydrocarbon sites today. Brownfield tie-ins and debottlenecking projects place temporary crews inside operating units, multiplying simultaneous operations. Contractor chains have lengthened, so a crane crew or excavation gang may answer to three employers. Sites that handle these well avoid dropped-object and gas-release events; others face stoppages and injuries. The course rests on the hierarchy of controls, the permit to work system and the bow-tie model of barriers.

Who Gains Most from Construction HSE Hazards in Oil and Gas Projects

  • Supervisors who direct rigging, scaffolding, trenching and welding crews on the workfront
  • HSE advisers who audit method statements, toolbox talks and gas-test records
  • Site managers who balance construction progress against plant operating constraints
  • Permit issuers and area authorities who release work beside live equipment
  • Contractor coordinators who onboard subcontract crews and verify their competence

A project team that sends its construction supervisor, area authority and HSE adviser together gains most.

Construction HSE Hazards in Oil and Gas Projects Capabilities

Participants practise judging lift plans, trench protection, anchor points and gas tests the way a release authority does.

  • Assess critical lift plans, crane ground bearing and exclusion zones — lift approval
  • Specify shoring, sloping and buried-service detection for excavations — dig permit sign-off
  • Design fall protection and dropped-object controls for elevated workfronts — scaffold handover
  • Apply gas testing, isolation and standby rescue for confined spaces — entry authorisation
  • Weigh simultaneous operations conflicts with live process units — operations and construction leads
  • Build contractor safety prequalification and field verification checks — project owner

Key Construction HSE Hazards in Oil and Gas Projects Terms

  • Simultaneous operations (SIMOPS) — two or more activities in one area whose combined hazards need joint controls and a single coordinating authority.
  • Permit to work — a written authorisation stating the job, its hazards, isolations and precautions.
  • Critical lift — a lift near capacity, over live plant, in tandem or with personnel, needing an engineered plan and named approval.
  • Hot work — welding, grinding, cutting or any spark source used where flammable vapour could be present.
  • Confined space — an enclosed vessel, pit or tank with restricted access where toxic gas, oxygen deficiency or engulfment can occur.
  • Bow-tie model — a diagram linking a top event to its threats and consequences, showing the prevention and recovery barriers between them.

Construction HSE Hazards in Oil and Gas Projects Day by Day

Day 1: Hazard Landscape of Brownfield Construction

  • Brownfield Versus Greenfield Hazard Profiles — Scope of Site Controls
  • Hierarchy of Controls for Construction Tasks — Choosing Engineering Over Behaviour
  • Bow-Tie Mapping of Gas Release Events — Barrier Ownership on Site
  • Job Safety Analysis Worksheets — Breaking Tasks Into Controllable Steps
  • Incident Learning From Construction Fatalities — Priorities for Site Inspections

Day 2: Lifting, Rigging and Working at Height

  • Critical Lift Plans and Crane Ground Bearing — Lift Approval Thresholds
  • Rigging Gear Inspection and Load Charts — Rejecting Unsafe Equipment
  • Scaffold Inspection Tags and Handover — Release for Elevated Work
  • Fall Arrest Anchors and Rescue Plans — Selecting Height Protection
  • Dropped Object Surveys and Exclusion Zones — Protecting Workers Below

Day 3: Excavation, Hot Work and Confined Spaces

  • Buried Service Detection and Hand Digging — Authorising Mechanical Excavation
  • Trench Shoring, Sloping and Spoil Placement — Collapse Prevention Choices
  • Gas Testing and Fire Watch for Welding — Hot Work Release
  • Confined Space Atmosphere Monitoring — Entry and Standby Rescue Decisions
  • Energy Isolation and Lockout Verification — Proving Equipment Safe

Day 4: Permits, SIMOPS and Contractor Control

  • Permit to Work Cross-Referencing — Conflicts Between Concurrent Jobs
  • SIMOPS Matrix for Live Plant Tie-Ins — Stop or Proceed Rules
  • Contractor Prequalification Criteria — Awarding Safety-Critical Scopes
  • Field Verification of Crew Competence — Mobilisation Readiness
  • Toolbox Talks and Stop-Work Authority — Workforce Engagement on Site

Day 5: Practising the Site Hazard Control Plan

  • Lift and Height Controls Applied to a Tie-In — Sequencing Workfronts
  • Excavation and Hot Work Permits Combined — Resolving Overlapping Hazards
  • SIMOPS Review With Operations Leads — Agreeing Shutdown Triggers
  • Contractor Audit Findings Into Actions — Closing Field Gaps
  • Site Hazard Control Plan Completion — Presenting to the Project Owner

Applying Construction HSE Hazards in Oil and Gas Projects After the Course

  • Lead a SIMOPS matrix review for the next tie-in on your unit, agreeing stop rules with the operations lead.
  • Run a dropped-object and scaffold-tag survey across one workfront and turn the findings into contractor actions.

Construction HSE Hazards in Oil and Gas Projects Questions (FAQ)

What are construction HSE hazards in oil and gas projects and why do they matter now?

They are the lifting, excavation, height, hot work and confined space dangers created when building near hydrocarbon plant. Brownfield tie-ins now bring construction crews beside live equipment.

Which roles gain most from construction HSE hazards in oil and gas projects training?

Construction supervisors, HSE advisers, site managers, permit issuers and contractor coordinators gain most. Each signs off or directs hazardous jobs.

How does construction HSE hazards in oil and gas projects training differ from process safety courses?

It focuses on temporary construction tasks rather than the design of process barriers. It covers cranes, trenches, scaffolds, welding and entry work during project phases.

What do you bring back from construction HSE hazards in oil and gas projects training?

You bring back a Site Hazard Control Plan for one workfront. It sets task controls, a SIMOPS matrix and contractor checks.

Construction HSE Hazards in Oil and Gas Projects: The Way Forward

The Site Hazard Control Plan gives each workfront a single view of its lifting, excavation, height, hot work and entry controls. Its first use is deciding which tie-in jobs may run beside live plant. After first use, revisit the SIMOPS stop rules, since real conflicts often appear where the plan assumed none.

Questions about dates, fees and booking

When does this course next run?

The next session runs 29 November – 3 December 2026 in Amman. It is one of 25 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 24 cities: Amman, London, Paris, Vienna, Abu Dhabi, Manama, Rome, Doha, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 18 – 22 July 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train