Skip to content

Control Valve and Actuator Maintenance and Overhaul Training Course

Bench and field practice for instrument and maintenance technicians who diagnose, repack, lap and rebuild throttling valves and their actuators.

This 1-week course has 25 dates from November 2026 to October 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Paris. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Paris
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

November 2026

December 2026

February 2027

March 2027

April 2027

May 2027

June 2027

July 2027

August 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Control Valve and Actuator Maintenance and Overhaul is a 1-week training course for instrument and maintenance technicians who restore throttling valves, actuators and positioners to reliable service, and who leave with a valve overhaul and test record for one critical loop. Sticking stems, leaking packing and passing seats cost product, energy and safe margins in every process plant. Jupiter Prime Training delivers this Control Valve and Actuator Maintenance and Overhaul course.

Why Control Valve and Actuator Maintenance and Overhaul Matters Now

Three forces shape valve upkeep today. Smart positioners now record friction, travel deviation and air consumption, so technicians can diagnose a valve in line before pulling it. Fugitive emission limits put stem packing under closer scrutiny from environmental and safety teams. Experienced fitters are retiring, taking bench knowledge with them. A plant that overhauls on evidence keeps loops stable; one that swaps valves on habit wastes spares. The course rests on manufacturer overhaul practice and recognised seat leakage classifications described in general terms.

Who Gains Most from Control Valve and Actuator Maintenance and Overhaul

  • Technicians who strip, inspect and rebuild valve bodies, bonnets and trim at the repair bench
  • Field crews who stroke, calibrate and set up actuators and positioners on live loops
  • Staff responsible for packing replacement, gland adjustment and emission checks
  • Planners who prepare valve scopes, kits and spares for shutdowns
  • Instrument fitters who trace loop oscillation back to valve friction or deadband

A site that sends its bench and field technicians together gains most.

Control Valve and Actuator Maintenance and Overhaul Capabilities

Participants decide what a valve needs before the spanners come out.

  • Assess valve signatures for friction, deadband and spring range errors — the repair or replace decision
  • Specify packing sets and gland loading for the service — emission and operations teams
  • Test seat tightness against the specified leakage class — process engineers accepting the valve
  • Calibrate pneumatic and electric actuators with their positioners — loop performance owners
  • Build an overhaul sequence for body, bonnet and trim — shutdown planners
  • Communicate as-found and as-left findings — reliability engineers tracking repeat failures

Key Control Valve and Actuator Maintenance and Overhaul Terms

  • Trim — the internal parts in contact with the flowing fluid: plug, seat ring, cage and stem.
  • Seat leakage class — a rating of how much flow may pass a closed valve under a stated test.
  • Deadband — the range of signal change that produces no measurable stem movement.
  • Bench set — the spring pressure range set on the actuator before it is fitted to the valve.
  • Valve signature — a plot of actuator pressure against stem travel used to reveal friction and seating faults.
  • Gland packing — compressible rings around the stem that seal the process fluid from atmosphere.

Control Valve and Actuator Maintenance and Overhaul Day by Day

Day 1: Valve Bodies, Trim and Flow Characteristics

  • Globe, Ball and Butterfly Bodies — Matching Repair Approach to Valve Style
  • Linear and Equal Percentage Trim — Reading Characteristic From Plug Shape
  • Cage and Unbalanced Plug Designs — Spotting Wear Points Before Stripping
  • Failure Mode Records — Ranking Valves by Repeat Fault History
  • As-Found Inspection Sheet — Capturing Condition Before Any Adjustment

Day 2: Actuators and Positioners

  • Spring and Diaphragm Actuators — Setting Bench Range and Fail Action
  • Piston and Electric Actuators — Choosing Checks for Torque and Thrust
  • Smart Positioner Setup — Travel Calibration and Feedback Linkage Alignment
  • Volume Boosters and Solenoids — Verifying Stroke Speed and Trip Response
  • Air Supply Quality Checks — Preventing Positioner Drift and Sticking Relays

Day 3: In-Line Diagnostics

  • Valve Signature Testing — Separating Friction From Seating Problems
  • Step Response Tests — Measuring Deadband and Overshoot on the Loop
  • Partial Stroke Records — Confirming Emergency Valves Will Move on Demand
  • Acoustic and Thermal Scans — Detecting Passing Seats Without Shutdown
  • Diagnostic Trend Review — Deciding Which Valves Go to the Bench

Day 4: Sealing, Packing and Seat Repair

  • Packing Material Selection — Balancing Low Friction Against Emission Control
  • Live-Loaded Gland Arrangements — Holding Seal Load Through Thermal Cycles
  • Seat Lapping and Ring Replacement — Restoring Shut-Off Within Leakage Class
  • Gasket and Bonnet Bolting — Achieving Even Load on Reassembly
  • Hydrostatic and Seat Leak Tests — Accepting the Valve for Return

Day 5: Practising the Valve Overhaul and Test Record

  • Strip-Down Sequence Exercise — Applying Trim Inspection to a Worked Example
  • Reassembly and Bench Set — Applying Actuator Calibration to a Rebuilt Valve
  • Post-Repair Signature — Applying Diagnostics to Prove the Repair
  • Shutdown Valve Kitting — Preparing Spares and Tools for the Next Outage
  • Valve Overhaul and Test Record — Completing Records for One Critical Loop

Applying Control Valve and Actuator Maintenance and Overhaul After the Course

  • Run signature tests on the five worst-performing loop valves and sort them into repair, adjust or leave
  • Introduce an as-found and as-left sheet for every valve sent to the bench, covering packing, seat test and bench set

Control Valve and Actuator Maintenance and Overhaul Questions (FAQ)

What is control valve and actuator maintenance and overhaul and why does it matter now?

It is the inspection, diagnosis, repair and testing of throttling valves and their actuators. It matters now because smart positioners make in-line diagnosis possible, emission scrutiny focuses on packing, and experienced valve fitters are retiring.

Which roles gain most from control valve and actuator maintenance and overhaul training?

Instrument and maintenance technicians gain most. Bench fitters, field crews and shutdown planners share one diagnostic method.

How does control valve and actuator maintenance and overhaul differ from a valve sizing course?

This course repairs and tests valves already installed. A sizing course chooses body size, trim and noise treatment for new duties before purchase.

What do you bring back from control valve and actuator maintenance and overhaul training?

You bring back a valve overhaul and test record for one critical loop, with as-found condition, repairs made, seat test result and post-repair signature.

Control Valve and Actuator Maintenance and Overhaul: The Way Forward

The valve overhaul and test record first informs which valves go on the next shutdown scope. Bench technicians, field crews and planners use it to agree repair, adjust or leave. After its first use, revisit the diagnostic thresholds that triggered removal, because tighter limits may catch failing valves earlier while looser ones may avoid needless stripping.

Questions about dates, fees and booking

When does this course next run?

The next session runs 23 – 27 November 2026 in Paris. It is one of 25 dates scheduled up to October 2027.

Where is this course held?

In a classroom in 24 cities: Paris, Dar es Salaam, Kuala Lumpur, Vienna, London, Dubai, Geneva, Milan, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 1 – 5 August 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train