Skip to content

Crude Tanker Cargo Handling and Crude Oil Washing Training Course

Ship officers and terminal cargo staff plan crude loading, discharge, tank washing and inert gas work, and defend outturn figures against quantity claims.

This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Rome. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Rome
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

November 2026

December 2026

January 2027

February 2027

March 2027

April 2027

May 2027

June 2027

July 2027

August 2027

September 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Crude Tanker Cargo Handling and Crude Oil Washing is a 1-week training course for cargo officers, terminal cargo staff and loading supervisors who plan and run crude oil transfers, and who leave with a cargo transfer and washing plan for one vessel and berth. Tighter outturn scrutiny and stricter vapour expectations make every transfer sequence a cost and safety decision. Jupiter Prime Training delivers the course around crude tanker cargo handling.

Why Crude Tanker Cargo Handling Matters Now

Three forces shape crude tanker cargo handling today. Cargo owners lodge claims over small shortfalls, so ullage readings must stand up to independent surveyors. Terminals expect closed loading with vapour return and a stable inert atmosphere. Charterers also want shorter port stays without breaching hull stress limits. A crude carrier that handles cargo well discharges more oil, clears berth sooner and avoids disputes. The course rests on recognised international tanker safety guidance and ship-shore checklist practice, described in general terms.

Who Gains Most from Crude Tanker Cargo Handling

  • Officers responsible for loading and discharge sequences and stress checks
  • Terminal staff responsible for transfer rates and ship-shore checks
  • Surveyors responsible for ullage, temperature and sampling records
  • Marine superintendents responsible for crude washing plans and inert gas performance
  • Commercial operators responsible for cargo claims and demurrage evidence

Mixed groups from a ship operator and the terminals it calls at gain most, agreeing one sequence from both sides of the manifold.

Crude Tanker Cargo Handling Capabilities

Participants learn to run a cargo sequence that respects stress, oxygen, vapour pressure and washing time at once.

  • Calculate gross and net standard volumes from ullage, temperature and water readings — outturn figures surveyors accept
  • Design loading and discharge sequences within shear force and bending moment limits — the master and terminal planner
  • Specify crude oil washing plans by tank, machine and cycle — residue reduction and discharge time
  • Apply inert gas pressure and oxygen limits through every cargo stage — tank atmosphere safety on board
  • Test ship-shore checklist answers against actual line-up settings — the joint go decision at the manifold
  • Build a claim file from ullage and pumping records — the commercial operator defending a shortfall

Key Crude Tanker Cargo Handling Terms

  • Ullage — the empty space measured from a reference point to the liquid surface in a tank.
  • Crude oil washing — cleaning cargo tanks during discharge by spraying crude through fixed washing machines.
  • Inert gas — low-oxygen gas kept in cargo tanks to prevent ignition.
  • Vessel experience factor — the ratio between ship and shore figures over past voyages.
  • Remaining on board — the oil, water and sludge left in tanks after discharge.
  • Vapour emission control — the closed system that returns displaced tank vapour to shore.

Crude Tanker Cargo Handling Day by Day

Day 1: Crude Cargo and Tanker Systems

  • Crude Properties and Vapour Pressure — How Cargo Behaviour Shapes Handling Limits
  • Cargo Pump Room and Pipeline Layout — Which Line-Ups Each Grade Allows
  • Tank Gauging and Closed Sampling Equipment — Reliability of Readings Under Closed Operation
  • Inert Gas Plant and Deck Seal — Keeping Tank Atmosphere Below Oxygen Limits
  • Hull Stress and Stability Software — Loading Condition Limits Before Any Transfer

Day 2: Loading Planning and Calculation

  • Ullage Temperature Interface Readings — Gross Observed Volume per Tank
  • Volume Correction Tables and Density — Net Standard Volume Reported on Bill
  • Vessel Experience Factor Records — Judging Ship Versus Shore Quantity Differences
  • Loading Sequence and Topping-Off Rates — Avoiding Overflow and Overstress
  • Vapour Return and Venting Control — Pressure Limits During Closed Loading

Day 3: Discharge and Crude Oil Washing

  • Discharge Sequence and Pump Performance Curves — Rate Against Back Pressure
  • Crude Oil Washing Plan by Tank — Cycle Choice for Residue Removal
  • Stripping and Drainage Methods — Reducing Remaining On Board Quantities
  • Inert Gas Topping-Up During Discharge — Positive Pressure and Oxygen Checks
  • Ballast Exchange Alongside Cargo Work — Trim, Draught and Air Draught Limits

Day 4: Ship-Shore Interface and Cargo Claims

  • Ship-Shore Safety Checklist Practice — Joint Go Decision Before Transfer Starts
  • Pre-Transfer Conference Records — Agreed Rates and Emergency Stops
  • Remaining On Board Measurement and Wedge Formula — Evidence for Shortfall Disputes
  • Letters of Protest and Time Sheets — Recording Delays and Quantity Differences
  • Cargo Claim File Assembly — Ullage and Pumping Log Evidence

Day 5: Practising the Cargo Transfer and Washing Plan

  • Loading Condition Exercise for One Vessel — Applying Stress and Ullage Methods
  • Discharge and Washing Timeline Exercise — Combining Pump Curves and Washing Cycles
  • Vapour and Inert Gas Scenario Drill — Responses to High Oxygen Readings
  • Claim Defence Role Play — Applying Remaining On Board and Protest Records
  • Cargo Transfer and Washing Plan — Final Sequence Agreed for Vessel and Berth

Applying Crude Tanker Cargo Handling After the Course

  • Rework the next loading sequence with stress checks and topping-off rates agreed with the terminal.
  • Compare recent ship and shore figures to update the vessel experience factor.

Crude Tanker Cargo Handling Questions (FAQ)

What is crude tanker cargo handling and why does it matter now?

Crude tanker cargo handling is the planning and control of loading, discharge, washing and measurement on crude carriers. It matters now because cargo owners challenge outturn figures, terminals require closed vapour-controlled transfers and charterers push for shorter port stays.

Which roles gain most from crude tanker cargo handling training?

Cargo officers, terminal cargo staff, surveyors, marine superintendents and commercial operators gain most. The course links their separate tasks into one transfer sequence.

How does a crude tanker cargo handling course differ from a loading master course?

A crude tanker cargo handling course works from the ship's side of the manifold. A loading master course centres on terminal supervision of berthing and transfer; this course covers washing, inert gas, hull stress and shipboard calculations.

What do you bring back from crude tanker cargo handling training?

You bring back a cargo transfer and washing plan for one vessel and berth. It holds the sequence, washing cycles, inert gas checks and claim records.

Crude Tanker Cargo Handling: The Way Forward

The cargo transfer and washing plan first informs the pre-transfer conference at the next port call, where officers and terminal staff agree rates and stops. Superintendents can reuse it to set washing cycles on sister vessels. After its first use, the plan is worth revisiting against actual outturn and residue figures.

Questions about dates, fees and booking

When does this course next run?

The next session runs 23 – 27 November 2026 in Rome. It is one of 25 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 24 cities: Rome, Vienna, Munich, Dubai, Milan, Amman, Manama, Amsterdam, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 17 – 21 October 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train