Liquid Pipeline Hydraulics and Batching Engineering Training Course
Sizing lines, pump stations, surge protection and product batches for crude and refined liquid pipelines, for engineers who set operating limits.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 22 – 26 November 2026 in Amman. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Amman
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
September 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Liquid Pipeline Hydraulics and Batching Engineering is a 1-week training course for pipeline engineers who size lines, pump stations and product sequences for crude and refined liquids, and who leave with a hydraulic operating envelope dossier for one line. Higher throughput and ageing assets make sound hydraulic decisions central to liquids networks. Jupiter Prime Training delivers this course on liquid pipeline hydraulics and batching engineering.
Why Liquid Pipeline Hydraulics and Batching Engineering Matters Now
Three forces shape liquid pipeline hydraulics today. Shippers want more grades through the same steel, so batch sequences grow shorter and interface volumes matter more. Ageing lines run closer to their pressure ratings, so surge events and wall thinning carry heavier consequences. Operators that model friction and transients well move more product with fewer trips; those relying on rules of thumb face overpressure and off-specification tanks. The course rests on steady-state hydraulic gradient modelling, transient wave theory and the industry practice of pressure design for liquid lines.
Who Gains Most from Liquid Pipeline Hydraulics and Batching Engineering
- Engineers responsible for line sizing, route profiles and hydraulic gradient studies
- Engineers who select pumps, drivers and station spacing for trunk and feeder lines
- Specialists who schedule product batches, interfaces and tank cuts at terminals
- Engineers who own surge protection, relief systems and maximum operating pressure limits
- Integrity staff who plan pigging runs, leak detection tuning and wall thickness checks
A pipeline operations group sending design, scheduling and integrity engineers together gains most.
Liquid Pipeline Hydraulics and Batching Engineering Capabilities
Participants move from pressure-drop arithmetic to defensible limits for a working line, linking friction, transients and product movement.
- Calculate friction losses and hydraulic gradients for crude and refined liquids — line sizing decisions
- Specify pump station duty points, spacing and driver ratings — capital and energy trade-offs
- Design batch sequences and interface cuts for multi-grade lines — terminal and shipper scheduling
- Assess surge pressures from valve closure and pump trips — relief and control settings
- Apply pressure design rules to confirm wall thickness and allowable pressure — integrity engineers
- Build an operating envelope with leak detection and pigging limits — control room operators
Key Liquid Pipeline Hydraulics and Batching Engineering Terms
- Hydraulic Gradient — the line of total head along a pipeline, showing where pressure must be added to keep liquid moving.
- Slack-Line Flow — a condition where the line runs partly full downstream of a high point.
- Batch Interface — the mixed zone formed where two consecutive products meet in one line.
- Surge Pressure — the transient pressure rise created when flow velocity changes suddenly.
- Maximum Operating Pressure — the highest pressure at which a pipeline segment may run under normal steady conditions.
- Line Pack — the extra volume of liquid held in a line by compression and pipe expansion at higher pressure.
Liquid Pipeline Hydraulics and Batching Engineering Day by Day
Day 1: Fluid Properties and Steady-State Hydraulics
- Viscosity, Density and Vapour Pressure Data — Choosing Design Fluid Cases
- Darcy-Weisbach and Colebrook Friction Factors — Accurate Pressure Drop Estimates
- Elevation Profiles and Hydraulic Gradient Plots — Locating Critical High Points
- Drag Reducing Agents — Raising Throughput Without New Pumps
- Slack-Line and Column Separation Checks — Setting Back-Pressure Requirements
Day 2: Pump Stations and Line Sizing
- Pump and System Curve Matching — Selecting Duty and Turndown Points
- Station Spacing Optimisation — Balancing Capital Cost Against Energy Use
- Series and Parallel Pump Arrangements — Flexibility for Varying Throughput
- Net Positive Suction Head Margins — Protecting Pumps From Cavitation
- Variable Speed Drives and Control Valves — Choosing Flow Control Strategy
Day 3: Batching and Product Movement
- Batch Sequence Planning for Crude Grades and Fuels — Shipper Nominations
- Interface Growth Estimation — Sizing Transmix and Downgrade Volumes
- Density and Interface Detection at Terminals — Timing Tank Cuts
- Line Fill and Line Pack Accounting — Reconciling Delivered Volumes
- Product Compatibility Matrices — Ordering Grades to Limit Contamination
Day 4: Transients, Integrity and Leak Detection
- Joukowsky Equation and Wave Speed — Screening Surge From Valve Closure
- Relief Valves, Surge Tanks and Closure Timing — Choosing Protection Methods
- Pressure Design and Wall Thickness Calculation — Confirming Allowable Pressure
- Computational Pipeline Monitoring and Mass Balance — Tuning Leak Alarms
- Utility Pigs and Inline Inspection Tools — Scheduling Cleaning and Inspection Runs
Day 5: Practising the Operating Envelope Dossier
- Integrated Hydraulic Model of a Sample Line — Combining Earlier Calculations
- Pump Trip and Emergency Shutdown Scenarios — Testing Surge Protection
- Batch Schedule Stress Test — Checking Interfaces Against Tank Capacity
- Leak Detection Sensitivity Review — Agreeing Alarm Thresholds With Operators
- Hydraulic Operating Envelope Dossier — Final Limits, Assumptions and Handover
Applying Liquid Pipeline Hydraulics and Batching Engineering After the Course
- Rebuild the hydraulic gradient of one existing line and compare it with observed discharge pressures.
- Run a surge screening of terminal manifold valve closures and propose relief settings.
Liquid Pipeline Hydraulics and Batching Engineering Questions (FAQ)
What is liquid pipeline hydraulics and batching engineering and why does it matter now?
It is the discipline of predicting pressure, flow and product movement in crude and refined liquid lines. It matters now because lines carry more grades at higher utilisation, so hydraulic errors quickly become trips or downgraded product.
Which roles gain most from liquid pipeline hydraulics and batching engineering?
Pipeline design, pump station, scheduling and integrity engineers gain most. You benefit if you set line limits, select pumps, plan batch sequences or tune leak alarms.
How does liquid pipeline hydraulics and batching engineering differ from a gas pipeline course?
It focuses on nearly incompressible liquids, so it covers slack-line flow, batch interfaces and water hammer rather than compressor stations and gas line pack.
What do you bring back from liquid pipeline hydraulics and batching engineering?
You bring back a worked hydraulic operating envelope dossier for one line. It sets pressure and flow limits, surge protection, batch rules, leak detection thresholds and pigging intervals.
Liquid Pipeline Hydraulics and Batching Engineering: The Way Forward
The hydraulic operating envelope dossier first informs the throughput limit the control room may run without breaching maximum operating pressure. Control room supervisors, schedulers and integrity engineers all use it as a shared reference. After its first use, revisit the fluid cases and the surge assumptions, as new grades and valve timings shift the limits.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 22 – 26 November 2026 in Amman. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Amman, Muscat, Milan, Manama, Munich, Doha, Geneva, Cairo, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 10 – 14 October 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.