Skip to content

Oil and Gas Process Technology Basics for Field Operators Training Course

Equipment behaviour, flow diagrams and control loops for operators and technicians running separation, compression and distillation units on shift.

This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 22 – 26 November 2026 in Kuala Lumpur. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Kuala Lumpur
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

November 2026

December 2026

January 2027

February 2027

March 2027

May 2027

June 2027

July 2027

August 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Oil and Gas Process Technology Basics for Field Operators is a 1-week training course for process operators, field technicians and newly appointed engineers, built around one named work product: a Unit Walkdown and Operating Envelope Card for a real processing train. Gas plants and refineries now run leaner shift crews, so each operator must spot drift early. Jupiter Prime Training offers this course on oil and gas process technology basics.

Why Oil and Gas Process Technology Basics Matter Now

Experienced operators are retiring faster than their knowledge is written down, control rooms lean on alarms a new operator must interpret, and asset owners expect fewer trips and flaring events. Crews that read the piping and instrumentation diagram, recognise a cavitating pump or flooding column and respond within the operating envelope keep product on specification and people safe; others see repeat upsets and damaged machinery. The course rests on recognised process safety management principles and standard instrumentation symbology.

Who Gains Most from Oil and Gas Process Technology Basics

  • Field operators running rounds, line-ups and start-ups
  • Panel operators interpreting trends, alarms and controller modes
  • Instrument and mechanical technicians isolating and returning equipment to service
  • Graduate process engineers supporting shift crews
  • Shift supervisors inducting and signing off new crew

A shift crew from one unit gains most when several members attend together.

Oil and Gas Process Technology Basics Capabilities

Participants move from spotting equipment on a drawing to explaining how it responds to changes in feed, pressure or temperature.

  • Trace a hydrocarbon stream through a process flow diagram and piping and instrumentation diagram — handover between field and panel operators
  • Assess pump and compressor behaviour against their curves and surge limits — start-up and changeover decisions
  • Calculate simple heat exchanger duty and approach temperature — fouling and cleaning requests to maintenance
  • Apply separator and distillation column principles to level, pressure and reflux changes — product specification calls
  • Test a control loop by reading set point, process variable and output — escalation to the panel or instrument technician
  • Specify safe operating limits and isolation steps for a unit section — permit-to-work and shift handover

Key Oil and Gas Process Technology Basics Terms

  • Piping and Instrumentation Diagram — the drawing showing equipment, lines, valves, instruments and control loops.
  • Net Positive Suction Head — the suction pressure margin above vapour pressure that prevents pump cavitation.
  • Surge — an unstable flow reversal in a centrifugal compressor operating at low flow.
  • Approach Temperature — the smallest temperature difference between hot and cold streams, a fouling signal.
  • Reflux Ratio — the share of condensed overhead liquid returned to a column to control purity.
  • Operating Envelope — the set of pressure, temperature, level and flow limits for safe, on-specification running.

Oil and Gas Process Technology Basics Day by Day

Day 1: Reading the Processing Train

  • Wellhead to Export Flow Scheme — Where Each Unit Adds Value
  • Process Flow Diagram Conventions — Tracing Streams Across Unit Boundaries
  • Piping and Instrumentation Diagram Symbols — Identifying Valves, Instruments and Tags
  • Hydrocarbon Phase Behaviour Basics — Why Pressure and Temperature Drive Separation
  • Field Round Routes and Log Sheets — What the Panel Needs From You

Day 2: Rotating Equipment in Service

  • Centrifugal Pump Curves and Duty Point — Choosing Throttling or Recycle
  • Cavitation and Suction Conditions — Protecting Pumps During Low Level
  • Reciprocating and Centrifugal Compressors — Matching Machine Type to Gas Duty
  • Anti-Surge Control and Recycle Valves — Safe Low-Flow Operation
  • Seal, Lube Oil and Vibration Checks — Early Warning Before a Trip

Day 3: Heat Transfer and Separation

  • Shell and Tube and Plate Exchangers — Selecting Bypass or Cleaning Actions
  • Duty and Approach Temperature Estimates — Spotting Fouling From Field Readings
  • Two-Phase and Three-Phase Separators — Level and Interface Control Choices
  • Gas Dehydration and Sweetening Overview — Meeting Sales Gas Specifications
  • Fired Heaters and Air Coolers — Balancing Throughput Against Tube Limits

Day 4: Distillation and Control Loops

  • Distillation Column Internals and Profiles — Reading Tray Temperatures and Pressure Drop
  • Reflux, Reboiler Duty and Cut Points — Holding Product on Specification
  • Flooding, Weeping and Foaming Symptoms — Deciding When to Cut Feed
  • Feedback, Cascade and Split-Range Loops — Choosing Auto, Manual or Cascade Mode
  • Alarm Priorities and Trip Systems — Responding Within the Safe Operating Limits

Day 5: Practising the Unit Walkdown and Operating Envelope Card

  • Applied Line-Tracing Exercise — Mapping One Train From Inlet to Export
  • Pump and Compressor Start-Up Simulation — Sequencing Line-Up and Recycle Steps
  • Upset Diagnosis Case — Linking Exchanger, Separator and Column Symptoms
  • Isolation and Permit-to-Work Walkthrough — Preparing Equipment for Maintenance Handover
  • Unit Walkdown and Operating Envelope Card — Completing Limits, Checks and Responses

Applying Oil and Gas Process Technology Basics After the Course

  • Walk one train with a senior operator, marking tagged instruments on the piping and instrumentation diagram.
  • Review the duty points of two critical pumps or compressors against their curves and log any near cavitation or surge.

Oil and Gas Process Technology Basics Questions (FAQ)

What are oil and gas process technology basics and why do they matter now?

They are the working knowledge of how pumps, compressors, exchangers, separators and columns behave in a processing train. Leaner crews mean each operator must act before a small drift becomes a trip.

Which roles gain most from oil and gas process technology basics?

Field and panel operators, maintenance technicians and graduate engineers gain most, because each must recognise abnormal pressure, level or flow quickly on shift.

How does an oil and gas process technology basics course for field operators differ from a general process and mechanical course?

It follows hydrocarbon streams through a live processing train rather than surveying equipment types, with most time on flow diagrams, separation, distillation and control loop modes.

What do you bring back from oil and gas process technology basics training?

You bring back a completed operating envelope card for a unit section and field checks for rotating and static equipment.

Oil and Gas Process Technology Basics: The Way Forward

The Unit Walkdown and Operating Envelope Card gives each crew member one page of limits, field checks and first responses for their own train. Its first use is at shift handover, where panel and field operators agree what normal looks like, and supervisors use it to sign off new starters. Revisit it after the first upset or turnaround.

Questions about dates, fees and booking

When does this course next run?

The next session runs 22 – 26 November 2026 in Kuala Lumpur. It is one of 25 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 24 cities: Kuala Lumpur, Barcelona, Amsterdam, Cairo, Istanbul, Amman, Manama, Sharm El-Sheikh, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 31 October – 4 November 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train