Skip to content

Oilfield Water Reuse and Disposal Planning Training Course

Production chemists, facilities engineers and operators forecast produced water and choose treatment, injection, reuse and disposal routes.

This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 14 – 18 December 2026 in Madrid. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Madrid
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

December 2026

January 2027

March 2027

April 2027

May 2027

August 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Oilfield Water Reuse and Disposal Planning is a 1-week training course for production chemists, facilities engineers and water handling operators who must produce a field water handling plan. Water cuts climb as reservoirs mature, so handling capacity, injection and disposal choices increasingly decide whether a field keeps flowing. Jupiter Prime Training links the subject to the reservoir, surface plant and environmental decisions it shapes.

Why Oilfield Water Reuse and Disposal Planning Matters Now

Three forces shape the subject. Rising water-to-oil ratios push separators, pumps and disposal wells towards their limits, turning water into the constraint on hydrocarbon output. Reservoir engineers want reinjected water clean enough to sustain voidage replacement without plugging the formation. Environmental and community expectations make every discharge, evaporation pond and freshwater draw visible to outside scrutiny. Operators that plan reuse and disposal routes ahead of the water curve avoid deferred production, injector workovers and costly emergency trucking; those that react late face chemical overspend and stranded volumes.

Who Gains Most from Oilfield Water Reuse and Disposal Planning

  • Production chemists who select scale inhibitors, biocides and oxygen scavengers and monitor residuals
  • Facilities engineers who size hydrocyclones, flotation units, filters and injection pumps
  • Water handling operators who run skimming tanks, disposal pumps and sampling points
  • Reservoir and injection specialists who set water quality targets for injectors
  • Environmental advisers who track discharge limits and reuse permits

Asset teams gain most when chemists, facilities engineers and operators from one producing field attend together.

Oilfield Water Reuse and Disposal Planning Capabilities

Participants trace water from the reservoir through surface plant to injection, reuse or disposal.

  • Build a field water balance and forecast water production over field life — facility debottlenecking decisions
  • Specify produced water treatment trains for oil-in-water and suspended solids targets — equipment selection by facilities engineers
  • Test source and formation water compatibility for scaling tendency — inhibitor selection for production chemists
  • Design corrosion and microbial control regimes for injection and disposal lines — integrity engineers and operators
  • Weigh reinjection, beneficial reuse and disposal well options — asset leadership and environmental advisers
  • Communicate water handling risks and capacity gaps — field development and budget reviews

Key Oilfield Water Reuse and Disposal Planning Terms

  • Produced water — formation and injected water brought to surface with oil and gas.
  • Water cut — the share of water in total liquid produced from a well or field, usually rising as reservoirs mature.
  • Voidage replacement — injecting water or gas to replace produced reservoir volumes and maintain reservoir pressure.
  • Scaling tendency — the likelihood that mixed or cooled waters precipitate minerals such as barium sulphate or calcium carbonate.
  • Injectivity decline — the loss of an injection well's capacity to accept water, often caused by solids, oil or bacterial plugging.
  • Beneficial reuse — putting treated produced water to a further use, such as industrial cooling or drilling fluid make-up.

Oilfield Water Reuse and Disposal Planning Day by Day

Day 1: The Field Water Picture

  • Field Water Balance Diagrams — Locating Capacity Bottlenecks Across Facilities
  • Water Production Forecasting from Decline Curves — Timing Plant Expansion
  • Produced Water Chemistry Analysis — Ions, Oil, Solids and Bacteria
  • Water Source Options: Aquifer, Seawater and Recycled — Supply Security Choices
  • Discharge and Reuse Permit Conditions — Constraints on Each Destination

Day 2: Treatment Train Selection

  • Skim Tanks and Corrugated Plate Interceptors — Bulk Oil Removal Stage
  • Hydrocyclones and Induced Gas Flotation — Oil-in-Water Polishing Choices
  • Walnut Shell and Media Filtration — Suspended Solids for Injection
  • Membrane and Thermal Options — Salinity Reduction for Reuse Routes
  • Deoiling Chemical Selection and Dosing — Clarifier Performance and Sludge Volume

Day 3: Scale, Corrosion and Microbial Control

  • Scaling Index Calculations and Compatibility Tests — Mixing Source and Formation Waters
  • Scale Inhibitor Squeeze and Continuous Injection — Treatment Life and Residuals
  • Oxygen Ingress and Scavenger Dosing — Injection Line Corrosion Rates
  • Sulphate-Reducing Bacteria Monitoring and Biocide Cycles — Souring Prevention
  • Corrosion Coupons and Probes — Inspection Intervals for Water Lines

Day 4: Injection, Reuse and Disposal Routes

  • Injection Water Quality Specifications — Injectivity Decline and Fracture Growth
  • Hall Plots and Injector Surveillance — Detecting Plugging Early
  • Disposal Well Capacity and Zone Selection — Containment and Pressure Limits
  • Beneficial Reuse Screening Matrix — Industrial, Agricultural and Drilling Uses
  • Life-of-Field Cost Comparison of Water Routes — Capital Versus Operating Trade-Offs

Day 5: Practising the Field Water Handling Plan

  • Updated Water Balance for a Case Field — Applying Forecasting Methods
  • Treatment Train and Chemical Regime Choice — Applying Days 2 and 3
  • Route Allocation Between Injection, Reuse and Disposal — Applying Day 4 Screening
  • Water Handling Risk Register — Contingency for Pump or Well Outages
  • Field Water Handling Plan — Recommendations for Asset Approval

Applying Oilfield Water Reuse and Disposal Planning After the Course

  • Rebuild the water balance for one producing facility and flag the first capacity limit the forecast reaches
  • Run a compatibility check between current injection water and formation water and adjust the scale inhibitor dose

Oilfield Water Reuse and Disposal Planning Questions (FAQ)

What is oilfield water reuse and disposal planning, and why does it matter now?

It is the practice of forecasting produced water and choosing how each volume is treated, reinjected, reused or disposed of. It matters now because rising water cuts make water handling the limit on oil output in many mature fields.

Which roles gain most from oilfield water reuse and disposal planning?

Production chemists, facilities engineers and water handling operators gain most, with injection specialists and environmental advisers close behind.

How does oilfield water reuse and disposal planning differ from a produced water treatment equipment course?

It plans the whole water route rather than tuning one treatment unit. It ties treatment, chemistry, injection and disposal into one field-level decision.

What do you bring back from oilfield water reuse and disposal planning?

You bring back a water handling plan for a producing field, with a forecast balance, allocated routes and an outage risk register.

Oilfield Water Reuse and Disposal Planning: The Way Forward

The field water handling plan first informs whether existing treatment and disposal capacity will meet the next water forecast. Facilities engineers, production chemists and asset leaders use it to schedule expansion and chemical budgets. Once the first year of operation passes, revisit the reuse screening, since new local demand for treated water can change the preferred route.

Questions about dates, fees and booking

When does this course next run?

The next session runs 14 – 18 December 2026 in Madrid. It is one of 25 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 24 cities: Madrid, Istanbul, Kuala Lumpur, London, Vienna, Barcelona, Dar es Salaam, Doha, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 10 – 14 January 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train