Skip to content

Pavement Repair and Surface Treatment Selection Training Course

Practical guidance for highway engineers and contractors on matching pothole, crack and surface defects to the right repair or treatment.

This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 30 November – 4 December 2026 in Dar es Salaam. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Dar es Salaam
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

November 2026

December 2026

January 2027

February 2027

March 2027

April 2027

May 2027

July 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Pavement repair and surface treatment selection is a 1-week training course for highway maintenance engineers and contractors who choose how damaged carriageways are fixed, producing a treatment selection matrix for their road network. Ageing asphalt, heavier axle loads and tighter resurfacing budgets mean the wrong patch or overlay is paid for twice. Jupiter Prime Training delivers this pavement repair and surface treatment selection course for practitioners who sign off repair methods.

Why Pavement Repair and Surface Treatment Selection Matters Now

Three forces shape pavement repair decisions today. Freight growth and heavier vehicles accelerate rutting and fatigue cracking, while hotter summers soften bituminous binders. Contractors face pressure to show that each patch, seal or inlay was chosen for the distress mechanism rather than habit. An authority that matches treatment to defect extends surface life and spends less on repeat call-outs; one that treats every defect with the same overlay hides structural failure under fresh asphalt. The course rests on the Pavement Condition Index (PCI) and the International Roughness Index (IRI) as shared condition measures.

Who Gains Most from Pavement Repair and Surface Treatment Selection

  • Engineers who inspect carriageways and record surface defects for the repair list
  • Contractor site leads who carry out patching, crack sealing and planing
  • Specialists who specify bituminous mixes, seals and overlay thicknesses
  • Coordinators who set intervention levels and schedule resurfacing lengths
  • Quality inspectors who check compaction, joints and finished texture

Maintenance contracts gain most when client engineers and contractor crews attend together and share one distress language.

Pavement Repair and Surface Treatment Selection Capabilities

Participants move from naming a crack to choosing, specifying and checking the repair that removes its cause.

  • Classify surface and structural distress by type, severity and extent — repair list priority
  • Calculate condition scores from survey sections — intervention timing
  • Weigh patching, sealing, inlay and overlay options — treatment selection
  • Specify materials and workmanship for each repair — contractor instructions
  • Test finished repairs for density, joints and texture — acceptance decisions
  • Build a treatment selection matrix for a network — budget holders and crews

Key Pavement Repair and Surface Treatment Selection Terms

  • Pavement Condition Index (PCI) — a 0 to 100 score summarising the type, severity and extent of distress on a surveyed section.
  • International Roughness Index (IRI) — a measure of longitudinal ride quality, expressed as vertical movement per length travelled.
  • Alligator cracking — interconnected fatigue cracks forming small polygons, usually a sign of weak base or overloaded layers.
  • Intervention level — the condition threshold at which a section is due for a defined repair or treatment.
  • Chip seal — a sprayed bitumen film covered with aggregate chippings to waterproof and restore skid resistance.
  • Mill and inlay — removing a worn surface layer by planing and replacing it with new asphalt at the same level.

Pavement Repair and Surface Treatment Selection Day by Day

Day 1: Reading Pavement Distress

  • Flexible And Rigid Pavement Layers — Where Failures Start
  • Distress Identification Catalogues — Consistent Defect Naming On Site
  • Cracking, Rutting And Ravelling Mechanisms — Surface Or Structural Cause
  • Drainage And Moisture Damage Signs — Repair Versus Root Cause
  • Visual Survey Sheets — Severity And Extent Recording

Day 2: Condition Scoring and Intervention Levels

  • PCI Calculation From Sample Units — Section Ranking
  • IRI And Rut Depth Readings — Ride And Safety Thresholds
  • Deflection Testing Basics — Structural Capacity Judgement
  • Intervention Level Tables — Timing Of Repair Versus Treatment
  • Deterioration Curves — Cost Of Waiting One More Season

Day 3: Pothole, Crack and Local Repairs

  • Pothole Patching Methods — Throw-And-Roll Versus Saw-Cut Repair
  • Crack Sealing And Filling — Working Versus Non-Working Cracks
  • Full-Depth Patches — Base Failure Correction
  • Joint And Edge Repairs On Concrete Slabs — Load Transfer
  • Cold And Hot Mix Choices — Weather And Traffic Constraints

Day 4: Resurfacing and Surface Treatments

  • Chip Seals And Slurry Surfacing — Waterproofing And Skid Resistance
  • Micro-Surfacing For Ruts — Shape Correction Without Overlay
  • Mill And Inlay Design — Level-Controlled Renewal
  • Overlay Thickness Selection — Structural Versus Functional Need
  • Compaction And Joint Quality Checks — Acceptance Of Finished Work

Day 5: Practising the Treatment Selection Matrix

  • Distress-To-Treatment Decision Trees — Applying Survey Findings
  • Network Case Study With PCI Scores — Ranking Candidate Sections
  • Life-Cycle Cost Comparison — Patch Now Or Resurface Later
  • Repair Specification Sheets — Clear Instructions For Crews
  • Treatment Selection Matrix — Completed For A Sample Network

Applying Pavement Repair and Surface Treatment Selection After the Course

  • Re-survey one maintenance length with a distress catalogue and recalculate PCI scores against current intervention levels.
  • Replace a standing pothole and crack repair habit with a decision tree that links each defect type to a named treatment.

Pavement Repair and Surface Treatment Selection Questions (FAQ)

What is pavement repair and surface treatment selection and why does it matter now?

It is the practice of matching each road defect to the repair or treatment that removes its cause. Heavier traffic, hotter summers and tight budgets make repeat repairs costly, so choosing correctly the first time extends surface life on urban streets and rural highways alike.

Which roles gain most from pavement repair and surface treatment selection?

Highway maintenance engineers and contractor site leads gain most. Inspectors who record defects, specialists who specify mixes and seals, and coordinators who set intervention levels also benefit.

How does pavement repair and surface treatment selection differ from a road asset management course?

It works at the level of the defect and the section rather than the whole network budget. An asset management course sets long-term funding strategy; this course decides which patch, seal, inlay or overlay suits a given distress and how to check the finished work.

What do you bring back from pavement repair and surface treatment selection?

You bring back a treatment selection matrix linking distress types and condition scores to named repairs, plus specification sheets your crews can follow. Both suit port access roads and municipal carriageways.

Pavement Repair and Surface Treatment Selection: The Way Forward

The treatment selection matrix first informs which sections enter next season's repair list and with which method. Client engineers use it to instruct work, and contractor leads use it to plan materials and crews. After its first season, it is worth revisiting the intervention levels against how long each repair actually lasted.

Questions about dates, fees and booking

When does this course next run?

The next session runs 30 November – 4 December 2026 in Dar es Salaam. It is one of 25 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 24 cities: Dar es Salaam, Manama, Casablanca, Istanbul, Barcelona, Madrid, Kuala Lumpur, Amman, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 23 – 27 May 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train