Skip to content

Pressure Vessel Welding and Hydrotest Supervision Training Course

Shop-floor control of welding, plate forming and pressure testing for engineers and inspectors who release vessels from the fabricator.

This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Munich. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Munich
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

November 2026

December 2026

January 2027

February 2027

March 2027

April 2027

May 2027

June 2027

July 2027

August 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Pressure Vessel Welding and Hydrotest Supervision is a 1-week training course for mechanical design engineers and fabrication inspectors who supervise shop welding, plate forming and the final hydrostatic test, and who compile a weld and pressure test supervision file. Owners now buy more vessels from distant fabricators with tight schedules, so the checks made on the shop floor decide whether a column, drum or separator arrives fit to install. Jupiter Prime Training delivers this shop supervision course.

Why Pressure Vessel Welding and Hydrotest Supervision Matters Now

Three groups shape vessel construction today. Purchasers rarely keep a resident inspector at distant fabricators, shops compress rolling, welding and heat treatment into short slots, and operators inherit whatever the records leave out. A vessel built against checked drawings, traced plate and qualified welds enters service with a clean baseline; one built without them carries hidden laminations and misaligned seams into service. The course draws on the recognised construction codes for unfired vessels, described in general terms, and on the inspection and test plan (ITP) as the backbone of shop surveillance.

Who Gains Most from Pressure Vessel Welding and Hydrotest Supervision

  • Engineers who check vessel drawings and nozzle details before shop release
  • Inspectors who witness fit-up, welding, examination and pressure tests at the fabricator
  • Specialists who approve plate, forging and consumable material certificates
  • Coordinators who track hold points and non-conformance reports on vessel orders
  • Engineers who receive finished vessels and set their first in-service inspection baseline

Purchaser groups gain most when a design checker, a weld inspector and a test witness attend together.

Pressure Vessel Welding and Hydrotest Supervision Capabilities

Participants leave able to judge each weld, formed head and pressure test against the approved drawing.

  • Calculate required shell and head thickness for internal pressure and corrosion allowance — drawing approval
  • Assess nozzle reinforcement and opening details against the available area — release for fabrication
  • Specify material traceability and certificate checks for plate, forgings and consumables — receiving inspection
  • Apply weld procedure and welder qualification records to shop seams — weld acceptance
  • Test hydrostatic pressure, hold time and leak criteria at the shop — final release
  • Build a baseline thickness and examination record for the delivered vessel — integrity engineers

Key Pressure Vessel Welding and Hydrotest Supervision Terms

  • Maximum allowable working pressure — highest pressure permitted at the vessel top at design temperature.
  • Corrosion allowance — extra wall thickness added beyond the pressure calculation to cover metal loss during service.
  • Area replacement — reinforcement method that restores the metal removed by a nozzle opening using the shell, nozzle neck and pad.
  • Mill test certificate — supplier document recording the chemistry, mechanical properties and heat number of a plate or forging.
  • Inspection and test plan — schedule of fabrication steps naming the hold, witness and review points for each party.
  • Hydrostatic test — water-filled pressure test above design pressure proving strength and tightness.

Pressure Vessel Welding and Hydrotest Supervision Day by Day

Day 1: Design Basis and Drawing Checks

  • Design Loads: Pressure, Wind, Seismic and Nozzle Forces — Setting the Datasheet
  • Shell and Head Thickness Calculation — Approving Plate Thickness on Drawings
  • Nozzle Reinforcement and Opening Limits — Accepting Nozzle Details
  • Saddle, Skirt and Lifting Lug Checks — Confirming Support Arrangement
  • General Arrangement Drawing Review Checklist — Releasing Drawings to the Shop

Day 2: Materials and Receiving Inspection

  • Carbon, Low-Alloy and Stainless Plate Selection — Matching Service Conditions
  • Impact Testing and Minimum Design Metal Temperature — Avoiding Brittle Fracture
  • Mill Test Certificate Verification — Accepting or Quarantining Plate
  • Heat Number Transfer and Marking — Keeping Traceability Through Cutting
  • Lamination Scanning of Plate Edges — Rejecting Defective Material

Day 3: Forming, Fit-Up and Welding Control

  • Plate Rolling and Head Forming Tolerances — Checking Out-of-Roundness and Thinning
  • Seam Fit-Up, Alignment and Root Gap — Approving Joints Before Welding
  • Weld Procedure and Welder Qualification Records — Authorising Shop Welding
  • Preheat, Interpass and Post-Weld Heat Treatment Charts — Accepting Thermal Cycles
  • Radiographic and Ultrasonic Examination Reports — Accepting or Repairing Seams

Day 4: Testing, Records and Handover

  • Hydrostatic and Pneumatic Test Procedures — Choosing Test Medium and Pressure
  • Test Witnessing, Gauges and Hold Time — Signing Pressure Test Release
  • Non-Conformance Reports and Concessions — Deciding Repair, Rework or Acceptance
  • Manufacturer's Data Report and Nameplate — Confirming Stamped Information
  • Baseline Thickness Survey for Service — Planning First In-Service Inspection

Day 5: Practising the Weld and Pressure Test Supervision File

  • Drawing and Calculation Audit of a Sample Separator — Applying Day 1 Checks
  • Material and Weld Record Trace for One Seam — Linking Plate to Weld
  • Inspection and Test Plan Hold Points — Assigning Purchaser and Shop Duties
  • Pressure Test Witness Simulation — Applying Release Criteria
  • Weld and Pressure Test Supervision File — Presenting Records, Findings and Baseline

Applying Pressure Vessel Welding and Hydrotest Supervision After the Course

  • Rewrite the inspection and test plan for the next vessel order with clear hold and witness points.
  • Audit one recently delivered vessel's mill certificates, weld maps and test records and close any gaps.

Pressure Vessel Welding and Hydrotest Supervision Questions (FAQ)

What is pressure vessel welding and hydrotest supervision and why does it matter now?

It is the shop-floor control of vessel welding, plate forming and hydrostatic testing. Short schedules at distant fabricators make these checks the main proof of build quality.

Which roles gain most from pressure vessel welding and hydrotest supervision?

Weld inspectors, test witnesses, design checkers and material approvers gain most.

How does pressure vessel welding and hydrotest supervision differ from a vessel design code or in-service inspection course?

It supervises welding, forming and testing in the shop rather than teaching design rules or service inspection. Calculations appear as drawing checks, and in-service inspection only as the delivery baseline.

What do you bring back from pressure vessel welding and hydrotest supervision?

You bring back a supervision file template: weld records, forming checks, test release and baseline thickness.

Pressure Vessel Welding and Hydrotest Supervision: The Way Forward

The weld and pressure test supervision file first informs whether a vessel passes its hydrotest and leaves the shop. Weld inspectors compile it, purchasers accept it and integrity engineers use its baseline for the first internal inspection. After its first use, compare its hold points with the defects actually found on petrochemical and power plant vessels.

Questions about dates, fees and booking

When does this course next run?

The next session runs 23 – 27 November 2026 in Munich. It is one of 25 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 24 cities: Munich, Manama, Dar es Salaam, Milan, Cairo, Amsterdam, Sharm El-Sheikh, Paris, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 30 May – 3 June 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train