Preventive and Predictive Maintenance Interval Training Course
Plan preventive and condition task frequencies, inspection routes and alarm bands that save craft hours and catch defects early.
This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 7 – 11 December 2026 in Dar es Salaam. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Dar es Salaam
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
July 2027
August 2027
September 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Preventive and Predictive Maintenance Interval training is a 1-week course for maintenance planners and schedulers who turn failure evidence into calendar, meter and condition task frequencies, producing an interval and inspection route register for one plant area. Planners now carry the gap between stretched crews and rising uptime targets, and poorly set frequencies waste labour or miss warning signs. Jupiter Prime Training runs this Preventive and Predictive Maintenance Interval course for planning offices.
Why Preventive and Predictive Maintenance Interval Matters Now
Three forces shape interval decisions today. Sensor and handheld instrument costs keep falling, so planners can choose between fixed overhauls and inspections triggered by vibration, heat or lubricant condition. Skilled technician hours are scarce, so every task in the schedule must earn its slot. Offices that set intervals from P-F evidence free craft hours; those copying manufacturer manuals over-maintain some assets and under-inspect others. The course rests on reliability centred maintenance (RCM) task logic and on Weibull analysis.
Who Gains Most from Preventive and Predictive Maintenance Interval
- Planners who build weekly schedules and own the task library in the CMMS
- Schedulers who balance craft hours, shutdown windows and route sequences
- Condition monitoring technicians who collect vibration, infrared and oil readings
- Maintenance engineers who sign off task content and frequency changes
- Area supervisors who release equipment for inspection and act on findings
A planning office that sends a planner, a scheduler and a condition monitoring technician together leaves with one shared route register and a common frequency rulebook.
Preventive and Predictive Maintenance Interval Capabilities
Participants practise turning failure records and readings into defendable frequencies.
- Calculate inspection frequencies from estimated P-F intervals — route length decisions
- Weigh calendar, runtime and condition triggers for each task — planning office rulebook
- Design vibration, thermography and oil sampling routes — technician workload balance
- Apply Weibull shape readings to overhaul timing — engineers approving task changes
- Build alarm and follow-up rules for condition readings — supervisors releasing equipment
- Assess PM compliance and task yield data — quarterly frequency adjustments
Key Preventive and Predictive Maintenance Interval Terms
- P-F interval — the time between the point a defect becomes detectable and the point of functional failure.
- Task yield — the share of executed inspections that find a defect needing corrective work.
- Condition monitoring route — an ordered list of measurement points a technician visits on a set frequency.
- Weibull shape parameter — a value showing whether failures come early, randomly or with wear-out ageing.
- PM compliance — the percentage of scheduled preventive tasks completed within their allowed window.
- Alarm band — the reading limits that move an asset from routine monitoring to a corrective work request.
Preventive and Predictive Maintenance Interval Day by Day
Day 1: Failure Patterns and Task Triggers
- Age-Related Versus Random Failure Patterns — Whether Fixed Overhauls Pay Off
- Failure History Extraction From CMMS — Which Assets Deserve Interval Review
- Calendar, Runtime and Condition Triggers — Choosing the Clock for Each Task
- Criticality Ranking for Planners — Where Inspection Effort Goes First
- Manufacturer Recommendation Review — Keeping or Changing Inherited Frequencies
Day 2: Setting Time-Based Frequencies
- Weibull Shape and Characteristic Life — Overhaul and Replacement Timing
- Mean Time Between Failures Limits — When Averages Mislead Frequency Choices
- Cost of Failure Versus Cost of Task — Break-Even Interval Calculation
- Lubrication and Consumable Schedules — Runtime Meter Based Planning
- Statutory and Safety Inspection Windows — Fixed Constraints on the Schedule
Day 3: Condition Monitoring Routes
- P-F Interval Estimation by Technique — Inspection Frequency Setting
- Vibration Measurement Points and Sequence — Rotating Equipment Route Design
- Infrared Thermography Rounds — Electrical Panels and Bearing Hot Spots
- Oil Sampling Points and Test Slates — Gearbox and Hydraulic Monitoring
- Alarm Bands and Follow-Up Rules — Converting Readings Into Work Requests
Day 4: Optimising the Existing Task Library
- PM Compliance and Task Yield Metrics — Removing Low-Value Tasks
- Task Consolidation by Location and Craft — Fewer Visits per Asset
- Shutdown Window Alignment — Grouping Intrusive Tasks With Outages
- Craft Hour Loading Charts — Levelling the Weekly Inspection Workload
- Frequency Change Records — Audit Trail for Engineering Approval
Day 5: Practising the Interval and Inspection Route Register
- Plant Area Failure Review — Applying Day 1 Patterns to Real Assets
- Break-Even Frequencies for Overhaul Tasks — Applying Day 2 Calculations
- Route Sequencing for a Pump House and Substation — Applying Day 3 Methods
- Loading Check Against Available Craft Hours — Applying Day 4 Levelling
- Interval and Inspection Route Register — Final Sign-Off Pack
Applying Preventive and Predictive Maintenance Interval After the Course
- Run a task yield review on the twenty most frequent preventive tasks and propose frequency changes with break-even evidence.
- Pilot one vibration or thermography route on a critical area, record findings and adjust alarm bands after the first month.
Preventive and Predictive Maintenance Interval Questions (FAQ)
What is Preventive and Predictive Maintenance Interval planning and why does it matter now?
It is the practice of setting how often each preventive or condition task runs. It matters now because craft hours are scarce and cheaper sensors give planners real choices between fixed overhauls and condition-triggered inspection in plants, utilities and buildings.
Which roles gain most from Preventive and Predictive Maintenance Interval skills?
Planners, schedulers and condition monitoring technicians gain most. They own the task library, the weekly schedule and the readings, so better frequencies change their daily work directly.
How does Preventive and Predictive Maintenance Interval training differ from a broader preventive maintenance design course?
It is built for the planning office rather than for strategy owners. A broader design course sets maintenance policy across a site; this one works at task level, turning failure records and readings into frequencies, routes and craft-hour loading.
What do you bring back from Preventive and Predictive Maintenance Interval training?
You bring back a drafted register of task frequencies and inspection routes for one plant area. It includes break-even calculations, route sequences and alarm bands.
Preventive and Predictive Maintenance Interval: The Way Forward
The interval and inspection route register gives the planning office a defendable basis for each frequency. Its first use is deciding which inherited manufacturer tasks to stretch, shorten or replace with condition rounds. After the first quarter of use, revisit task yield and alarm bands, since real findings will sharpen the original P-F estimates.
Find more Maintenance, Reliability & Asset Integrity Training Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 7 – 11 December 2026 in Dar es Salaam. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Dar es Salaam, Barcelona, New York, Amman, London, Paris, Munich, Istanbul, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 16 – 20 May 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.