Process Piping Design and Code Compliance Training Course
Classify, specify, fabricate, examine and leak test process lines to the governing piping code, for piping, mechanical and inspection engineers.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 22 – 26 November 2026 in Muscat. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Muscat
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
September 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Process Piping Design and Code Compliance is a 1-week training course for piping, mechanical and inspection engineers who must show that each process line is classified, specified, built and tested to the governing piping code, ending with a line-class compliance dossier. Refineries and gas plants are adding tie-ins to older units, so traceable code conformance now decides start-up dates. Jupiter Prime Training delivers Process Piping Design and Code Compliance.
Why Process Piping Design and Code Compliance Matters Now
Three forces shape process piping compliance today. Operators are revamping ageing refinery and gas-processing units, so new spools must meet the code edition named in the original design basis. Owners, licensors and insurers increasingly ask for documented line-by-line conformance before mechanical completion. A plant that handles this well commissions on schedule; one that handles it badly faces rework, rejected test packs and hidden leak paths. The course rests on the owner's piping code, the Piping and Instrumentation Diagram (P&ID) and the Welding Procedure Specification (WPS).
Who Gains Most from Process Piping Design and Code Compliance
- Engineers who prepare piping class sheets and line designation tables for new units and revamps
- Specialists who select pipe, fittings, flanges and gaskets against service conditions
- Inspectors who witness fabrication, review weld records and release spools for erection
- Engineers who plan and approve hydrostatic and pneumatic leak tests
- Technical reviewers who sign off contractor deliverables before mechanical completion
Owner teams gain most when design and inspection members attend together.
Process Piping Design and Code Compliance Capabilities
Participants turn code clauses into line decisions that fabricators and inspectors can verify.
- Classify each line into its fluid service category — owner sign-off on examination extent
- Specify design pressure and temperature from relief settings and upsets — process licensor alignment
- Apply listed and unlisted component rules to piping class sheets — procurement and vendor approval
- Assess welder qualification, heat treatment and joint records — spool release for erection
- Calculate leak test pressures and hold periods — test pack approval and safety planning
- Build a traceable compliance record per line — mechanical completion and handover
Key Process Piping Design and Code Compliance Terms
- Fluid service category — The code classification of a line by toxicity, flammability, pressure and temperature that sets design and examination requirements.
- Design basis — The documented pressures, temperatures, code edition and owner rules that every piping decision must trace back to.
- Piping class sheet — A specification listing approved pipe, fittings, flanges, valves and gaskets for a stated rating and service.
- Unlisted component — A component not covered by a referenced standard, needing separate pressure design proof before use.
- Random examination — Inspection of a stated percentage of joints, with progressive sampling when a defect is found.
- Leak test — A hydrostatic or pneumatic pressure test proving the integrity of a completed piping system before service.
Process Piping Design and Code Compliance Day by Day
Day 1: Code Scope and Design Basis
- Code Scope And Exclusions — Which Lines The Piping Code Governs
- Owner Responsibilities And Inspector Roles — Accountability For Conformance
- Design Basis Documents And Code Editions — Revamp Tie-In Decisions
- Line Designation Tables From P&IDs — Traceability From Process To Spool
- Fluid Service Categories — Selecting Normal, Category M Or High Pressure Rules
Day 2: Design Conditions and Pressure Integrity
- Design Pressure And Temperature From Relief Settings — Margin Against Upsets
- Allowable Stress Tables And Quality Factors — Material Utilisation Choices
- Pressure Design Of Straight Pipe And Bends — Schedule Selection Sign-Off
- Branch Connections And Closures — Fitting Or Fabricated Branch Choice
- Pressure-Temperature Ratings Of Flanges — Class Selection Per Service
Day 3: Materials, Components and Piping Classes
- Listed And Unlisted Components — Proof Testing Or Analysis Route
- Material Toughness And Low-Temperature Limits — Impact Testing Exemptions
- Corrosion Allowance And Sour Service Materials — Life-Cycle Selection Trade-Offs
- Piping Class Sheet Structure — Contractor Specification Review
- Valve And Gasket Selection Per Class — Leak Tightness And Spares
Day 4: Fabrication, Examination and Testing
- Welding Procedure Specification And Welder Qualification — Spool Shop Acceptance
- Preheat And Postweld Heat Treatment — Hardness And Cracking Control
- Required Examination Extent And Acceptance Criteria — Repair Or Release
- Progressive Sampling After Rejected Joints — Contractor Quality Escalation
- Hydrostatic And Pneumatic Leak Testing — Test Pressure And Exclusion Zones
Day 5: Practising the Line-Class Compliance Dossier
- Fluid Service Classification Of A Revamp Line List — Case Application
- Design Condition And Class Sheet Check — Contractor Deliverable Audit
- Examination And Test Pack Review — Mechanical Completion Readiness
- Code Interpretation Disputes And Deviation Requests — Owner Decision Records
- Line-Class Compliance Dossier — Handover To Operations And Integrity Teams
Applying Process Piping Design and Code Compliance After the Course
- Audit one revamp line list against fluid service categories and record the examination extent each line needs.
- Review an open test pack with the inspection team, checking test pressure, hold time and weld record traceability before sign-off.
Process Piping Design and Code Compliance Questions (FAQ)
What is process piping design and code compliance, and why does it matter now?
It is the practice of proving that every process line is classified, designed, fabricated, examined and tested as the governing piping code requires. Frequent revamps make traceable conformance essential for safe start-up.
Which roles gain most from process piping design and code compliance training?
Piping, mechanical and inspection engineers in refineries, gas plants and petrochemical sites gain most. Owner engineers and spool inspectors also benefit.
How does process piping design and code compliance differ from a piping stress course?
This course follows the full code path, from fluid service classification and materials to welding, examination and leak testing. A stress course concentrates on thermal flexibility, support loads and nozzle reactions.
What does a participant bring back from process piping design and code compliance training?
You bring back a line-class compliance dossier template, tested on a revamp case and checklists for class sheet and test pack review.
Process Piping Design and Code Compliance: The Way Forward
The line-class compliance dossier gives each line one traceable record of classification, design conditions, materials, examination and testing. Its first use is the mechanical completion decision on a revamp or new unit, shared by piping and inspection engineers. After that first handover, revisit how fluid service categories were assigned, since early classification choices drive examination cost and future integrity planning.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 22 – 26 November 2026 in Muscat. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Muscat, Dar es Salaam, Dubai, Amsterdam, Kuala Lumpur, New York, Casablanca, Rome, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 28 February – 4 March 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.