Refinery Combustion and Heat Transfer Training Course
Turn flue gas, temperature and fouling readings into better firing and cleaning decisions on refinery heaters and preheat trains.
This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 21 – 25 December 2026 in Barcelona. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Barcelona
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Refinery Combustion and Heat Transfer is a 1-week training course for refinery process engineers and fired heater operators, built around a furnace and exchanger heat balance workbook for one crude or conversion unit. Fuel is a refinery's largest controllable operating cost, and flue gas losses, fouled exchangers and tube overheating all erode margin and reliability. Jupiter Prime Training offers this course in refinery combustion and heat transfer.
Why Refinery Combustion and Heat Transfer Matters Now
Three pressures meet in the furnace and preheat train: tighter refining margins that make every unit of fuel count, emission limits on carbon dioxide and nitrogen oxides, and heavier, more variable crude slates that accelerate fouling. A site that reads its heat balances well cuts fuel per barrel, extends run length and keeps tube metal temperatures inside design. The course draws on accepted combustion stoichiometry, radiant and convective heat transfer theory and exchanger rating methods, described in general engineering terms.
Who Gains Most from Refinery Combustion and Heat Transfer
- Engineers who monitor furnace duty, draft and flue gas oxygen on crude and vacuum units
- Board and field operators who adjust firing, dampers and fuel balance during each shift
- Specialists who track preheat train fouling and plan exchanger cleaning
- Energy coordinators who report fuel intensity and heat recovery opportunities
- Reliability staff who watch tube skin temperatures and coking trends
Unit teams that send an engineer and a console operator together gain most, because firing decisions and exchanger monitoring meet at the same control screen.
Refinery Combustion and Heat Transfer Capabilities
Participants practise turning flue gas readings, temperatures and flows into firing and cleaning decisions.
- Calculate air-to-fuel ratios and flue gas composition from fuel analysis — firing targets for each heater
- Assess radiant and convection section duty split from field measurements — coil life and capacity limits
- Apply efficiency calculations based on stack losses — fuel budget and emission reports
- Weigh exchanger cleaning timing against lost preheat and extra furnace firing — turnaround planners
- Test safe light-off, purge and trip sequences against operating procedures — shift supervisors
- Communicate heat balance findings in clear trends — unit managers and energy leads
Key Refinery Combustion and Heat Transfer Terms
- Excess air — combustion air supplied above the stoichiometric amount, needed for complete burning but a source of stack loss.
- Radiant section — the firebox zone where tubes receive heat mainly by radiation from flames and hot gas.
- Convection section — the upper bank of tubes where flue gas transfers heat by gas flow over finned or studded surfaces.
- Bridgewall temperature — flue gas temperature leaving the radiant section, a key limit for tube and support integrity.
- Fouling factor — added thermal resistance from deposits on exchanger surfaces, lowering heat transfer over time.
- Tube skin temperature — the measured metal temperature of a heater tube, used to judge coking and creep exposure.
Refinery Combustion and Heat Transfer Day by Day
Day 1: Fuel, Air and Flame Chemistry
- Fuel Gas And Fuel Oil Properties — Heating Value And Firing Stability
- Stoichiometric Air Calculation — Setting Minimum Air For Each Fuel
- Flue Gas Oxygen And Combustibles — Signals Of Incomplete Burning
- Nitrogen Oxides Formation Mechanisms — Low-Emission Firing Choices
- Draft Profile Through The Heater — Damper And Fan Settings
Day 2: Radiant and Convective Heat Transfer
- Radiant Heat Flux Distribution — Flame Shape And Tube Spacing
- Convection Bank Performance — Finned Tube Fouling And Soot Blowing
- Bridgewall Temperature Limits — Firing Rate Ceilings For Each Heater
- Tube Skin Thermocouple Readings — Early Signs Of Internal Coking
- Heater Duty Split Calculation — Radiant Versus Convection Loading
Day 3: Exchanger Preheat Trains and Fouling
- Shell And Tube Exchanger Rating — Overall Coefficient Tracking
- Fouling Factor Trending — Crude Type And Desalter Performance Effects
- Preheat Train Temperature Profile — Furnace Inlet Temperature Losses
- Exchanger Cleaning Economics — Timing Against Extra Fuel Firing
- Antifoulant And Bypass Strategies — Extending Run Length Safely
Day 4: Efficiency Monitoring and Safe Furnace Operation
- Stack Loss Efficiency Method — Fuel Intensity Reporting
- Air Preheater And Waste Heat Recovery — Retrofit Screening Criteria
- Burner Management Interlocks — Purge, Light-Off And Trip Logic
- Flame Impingement And Afterburning Signs — Immediate Operator Responses
- Heater Operating Envelope — Integrity Limits Shared With Reliability
Day 5: Practising the Furnace and Exchanger Heat Balance Workbook
- Applying Stoichiometric Air Calculations — Setting Oxygen Targets On A Crude Heater
- Applying Duty Split Calculations — Diagnosing A Vacuum Heater Case
- Applying Fouling Factor Trends — Ranking Exchangers For Cleaning
- Petrochemical Cracking Furnace Comparison — Lessons For Refinery Heaters
- Furnace And Exchanger Heat Balance Workbook — Completed For One Unit
Applying Refinery Combustion and Heat Transfer After the Course
- Build a weekly flue gas oxygen and stack temperature trend for one heater and agree targets with operators.
- Rank preheat exchangers by fouling factor and propose cleaning dates to the turnaround planner.
Refinery Combustion and Heat Transfer Questions (FAQ)
What is refinery combustion and heat transfer and why does it matter now?
It is the study of how fuel burns in refinery heaters and how that heat reaches process streams through tubes and exchangers. It matters now because fuel cost, emission limits and heavier crudes all press on furnace and preheat performance.
Which roles gain most from refinery combustion and heat transfer training?
Process engineers, console and field operators, energy coordinators and reliability staff on crude, vacuum and conversion units gain most.
How does refinery combustion and heat transfer differ from burner tuning training?
It covers the whole thermal chain, from fuel chemistry through radiant and convection sections to the preheat train. Burner tuning courses focus narrowly on flame adjustment and troubleshooting individual burners.
What do you bring back from refinery combustion and heat transfer training?
You bring back a heat balance workbook for one unit, with oxygen targets, a duty split, a fouling ranking and an efficiency trend.
Refinery Combustion and Heat Transfer: The Way Forward
The furnace and exchanger heat balance workbook first informs where to set flue gas oxygen targets on the chosen heater. Engineers and console operators use it each week, and turnaround planners draw on its fouling ranking. After the first cleaning cycle, revisit the cost of extra firing against exchanger downtime, since crude changes shift that balance.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 21 – 25 December 2026 in Barcelona. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Barcelona, Kuala Lumpur, Madrid, New York, London, Amsterdam, Sharm El-Sheikh, Vienna, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 2 – 6 May 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.