Skip to content

Refinery Materials Selection and Corrosion Control Training Course

Choose alloys, coatings, inhibitors and cathodic protection for sour and wet refinery service, for materials, corrosion and integrity engineers.

This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 6 – 10 December 2026 in Abu Dhabi. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Abu Dhabi
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

December 2026

January 2027

February 2027

March 2027

April 2027

May 2027

June 2027

July 2027

August 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Refinery Materials Selection and Corrosion Control is a 1-week training course for materials, corrosion and integrity engineers, built around a materials and corrosion control register for one process unit. Heavier, more acidic crudes and longer run lengths are pushing carbon steel and low-alloy equipment towards its limits. Jupiter Prime Training delivers this course on alloy choice and corrosion barriers.

Why Refinery Materials Selection and Corrosion Control Matters Now

Three forces shape this field today: crude slates richer in sulphur and naphthenic acids, turnaround intervals stretched to protect margins, and a thinning pool of experienced metallurgists able to judge alloy upgrades. Matching metallurgy to process conditions keeps hydrocarbon contained; mismatches bring leaks and unplanned shutdowns. The course rests on corrosion loop thinking, integrity operating windows and the industry's recognised sour service materials requirements.

Who Gains Most from Refinery Materials Selection and Corrosion Control

  • Engineers who choose alloys, cladding and weld overlays for new and replacement equipment
  • Specialists who set chemical injection, wash water and inhibitor dosing on process units
  • Integrity engineers who define corrosion loops, thickness monitoring locations and inspection intervals
  • Engineers who specify protective coatings, linings and cathodic protection for tanks and buried lines
  • Technical staff who lead failure investigations and metallurgical root cause studies

A refinery or gas processing site gains most when its materials, process and inspection engineers attend together.

Refinery Materials Selection and Corrosion Control Capabilities

Participants link each damage mechanism to the metallurgy, chemistry and monitoring that keeps it within limits on hydrocarbon units.

  • Assess active damage mechanisms in crude, hydroprocessing and amine units — turnaround scope
  • Specify carbon steel, stainless and nickel alloys for sour and wet service — project engineers
  • Weigh coatings, inhibitors and cathodic protection against alloy upgrades — asset budget holders
  • Design corrosion monitoring with probes, coupons and thickness locations — inspection planners
  • Apply failure analysis to cracked, thinned or pitted components — reliability leaders
  • Build integrity operating windows that alert operators before damage accelerates — operations

Key Refinery Materials Selection and Corrosion Control Terms

  • Corrosion loop — a group of equipment sharing the same process conditions, materials and damage mechanisms, managed as one unit.
  • Sulfidation — high-temperature attack of steel by sulphur compounds, causing general thinning in hot crude and vacuum service.
  • Wet H2S cracking — hydrogen damage in carbon steel exposed to water containing hydrogen sulphide, including blistering and stepwise cracking.
  • Naphthenic acid corrosion — localised attack by organic acids in hot crude fractions, often at high-velocity points.
  • Integrity operating window — a defined limit on a process variable beyond which damage rates rise and action is needed.
  • Corrosion allowance — extra wall thickness added at design to absorb expected metal loss over the planned service life.

Refinery Materials Selection and Corrosion Control Day by Day

Day 1: Damage Mechanisms Across Refinery and Gas Units

  • Electrochemical Corrosion Cell — Explaining Metal Loss in Aqueous Process Streams
  • Sulfidation and Naphthenic Acid Attack — Locating Hot Crude Unit Risk
  • Wet H2S Cracking and Blistering — Screening Sour Water and Amine Lines
  • High-Temperature Hydrogen Attack — Judging Hydroprocessing Reactor Metallurgy
  • Corrosion Loop Diagram — Grouping Equipment by Shared Damage Mechanisms

Day 2: Alloy Choice for Sour and Wet Service

  • Carbon and Low-Alloy Steel Limits — Setting Hardness and Heat Treatment Rules
  • Stainless and Duplex Alloys — Balancing Chloride Cracking and Cost
  • Nickel Alloys and Clad Plate — Justifying Upgrades for Severe Duty
  • Weld Overlay and Weldment Hardness Control — Preventing Sour Cracking at Joints
  • Materials Selection Diagram — Recording Metallurgy Choices per Process Stream

Day 3: Coatings, Inhibitors and Cathodic Protection

  • Internal Linings and External Coating Systems — Matching Surface Preparation to Duty
  • Corrosion Inhibitor and Neutraliser Injection — Controlling Overhead and Wash Water Attack
  • Cathodic Protection for Tank Bottoms and Buried Lines — Choosing Anodes or Impressed Current
  • Corrosion Under Insulation Barriers — Prioritising Jacketing and Coating Repairs
  • Life Cycle Cost Comparison — Selecting Alloy, Coating or Chemical Control

Day 4: Monitoring, Inspection and Failure Analysis

  • Coupons, Electrical Resistance Probes and Thickness Locations — Designing Monitoring Coverage
  • Integrity Operating Windows — Linking Process Excursions to Inspection Triggers
  • Remaining Life Calculation — Scheduling Replacement From Measured Corrosion Rates
  • Metallographic and Fractographic Examination — Identifying Cracking and Thinning Modes
  • Failure Analysis Report Structure — Turning Findings Into Material Changes

Day 5: Practising the Materials and Corrosion Control Register

  • Crude Unit Overhead Case — Applying Inhibitor and Alloy Choices Together
  • Sour Water Stripper Case — Testing Hardness and Cracking Controls
  • Storage Terminal Case — Combining Coatings and Cathodic Protection
  • Monitoring Location Review — Checking Coverage Against Each Corrosion Loop
  • Materials and Corrosion Control Register — Completing Mechanisms, Barriers and Monitoring

Applying Refinery Materials Selection and Corrosion Control After the Course

  • Lead a corrosion loop review on one process unit and mark gaps in monitoring locations.
  • Draft integrity operating windows for the two process variables that most affect damage rates on that unit.

Refinery Materials Selection and Corrosion Control Questions (FAQ)

What is refinery materials selection and corrosion control, and why does it matter now?

It is the practice of matching metallurgy, chemical treatment and protection to the damage mechanisms of each refinery and gas unit. It matters now because more corrosive crudes and longer runs leave less margin for poor alloy choices.

Which roles gain most from refinery materials selection and corrosion control?

Materials, corrosion and integrity engineers gain most, along with process engineers who set injection and wash water rates.

How does refinery materials selection and corrosion control differ from an upstream corrosion course?

It concentrates on hot hydrocarbon, hydrogen and sour water damage in processing plants rather than production wells and flowlines.

What do you bring back from refinery materials selection and corrosion control?

You bring back a materials and corrosion control register for one unit. It lists each corrosion loop, its mechanisms, chosen alloys, protective barriers and monitoring points.

Refinery Materials Selection and Corrosion Control: The Way Forward

The materials and corrosion control register first informs which equipment needs an alloy upgrade or new monitoring before the next turnaround. Materials engineers maintain it, inspection planners draw scopes from it, and process engineers use it to respect operating limits. After its first use, revisit how crude slate changes shift each loop's mechanisms and barriers.

Questions about dates, fees and booking

When does this course next run?

The next session runs 6 – 10 December 2026 in Abu Dhabi. It is one of 25 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 24 cities: Abu Dhabi, Amman, Rome, Munich, Madrid, Amsterdam, Barcelona, Muscat, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 20 – 24 June 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train