Refractory Lining Inspection and Hot Repair Training Course
Assess furnace, kiln and heater linings while units run, read hot spots and choose gunning or patch repairs, built for maintenance and integrity engineers.
This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 14 – 18 December 2026 in Dar es Salaam. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Dar es Salaam
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Refractory Lining Inspection and Hot Repair is a 1-week training course for furnace, kiln and fired heater maintenance engineers who must judge the condition of linings while units stay on line, and it builds a lining condition and repair register for each unit. Unplanned shell hot spots force costly slowdowns, so plants need inspectors who read early warning signs well. Jupiter Prime Training presents this course for refractory inspection and hot repair practice.
Why Refractory Lining Inspection and Hot Repair Matters Now
Longer run lengths between turnarounds, tighter fuel efficiency targets and a thinning pool of experienced refractory specialists are changing how plants look after hot linings. Kiln, reformer and crude heater operators now expect linings to last longer, so more inspection happens while units are hot. Early detection of spalling or anchor failure allows a planned hot repair; missing it brings shell overheating and emergency stops. The course rests on recognised refractory practice and on inspection planning approaches described in general engineering terms.
Who Gains Most from Refractory Lining Inspection and Hot Repair
- Engineers responsible for the mechanical integrity of furnaces, kilns and fired heaters
- Inspectors who carry out shell temperature surveys and internal lining checks
- Maintenance planners who schedule refractory repairs into outages and run windows
- Process engineers who set firing limits around lining condition
Plants that send an inspector, a planner and a process engineer from the same unit gain most, because they leave sharing one view of lining risk.
Refractory Lining Inspection and Hot Repair Capabilities
Participants turn shell temperatures and visual findings into repair choices.
- Interpret infrared shell scans and hot-spot trends — run-or-repair decisions for the operations manager
- Classify refractory damage mechanisms from visual evidence — choice of repair method
- Specify hot gunning, patching and shell cooling measures — temporary containment of a failing zone
- Estimate remaining lining life from wear and temperature records — reline timing in the outage plan
- Build acceptance criteria for repaired zones — sign-off by inspection and production
- Communicate lining risk in clear ranked terms — budgeting and turnaround scope decisions
Key Refractory Lining Inspection and Hot Repair Terms
- Hot spot — a local area of the steel shell running hotter than its surroundings, often signalling lining loss or gas bypass.
- Spalling — cracking and detachment of refractory faces caused by thermal shock, mechanical stress or chemical attack.
- Hot gunning — spraying a refractory mix onto a lining while the unit remains at or near operating temperature.
- Anchor — a metal or ceramic fixing that holds monolithic refractory to the shell and controls its movement.
- Shell thermography — infrared imaging of the outer casing to map temperature patterns linked to lining condition.
- Remaining lining life — the estimated run time before a refractory zone reaches its minimum safe thickness or temperature limit.
Refractory Lining Inspection and Hot Repair Day by Day
Day 1: Linings in Service and Their Failure Modes
- Brick, Castable and Fibre Lining Behaviour — Expected Service Duty
- Thermal Shock and Spalling Mechanisms — Firing Rate Limits
- Slag, Alkali and Chemical Attack — Material Upgrade Choices
- Anchor Corrosion and Lining Detachment — Shell Risk Ranking
- Operating History Review Sheets — Inspection Focus Areas
Day 2: On-Line Inspection Methods
- Infrared Shell Scanning Routes — Survey Frequency Setting
- Temperature Trend Charts and Alarm Bands — Escalation Thresholds
- Peephole and Camera Internal Viewing — Firebox Condition Calls
- Shell Strain and Bulge Measurement — Structural Concern Flags
- Flue Gas and Draft Readings — Gas Bypass Detection
Day 3: Off-Line Inspection and Lining Assessment
- Entry Inspection Checklists for Cooled Units — Damage Mapping
- Thickness, Hammer and Core Testing — Residual Lining Strength
- Joint, Expansion Gap and Seal Checks — Movement Allowance Review
- Damage Photography and Zone Coding — Repair Scope Records
- Wear Rate and Remaining Life Estimation — Reline Timing
Day 4: Hot Repair and Containment Methods
- Hot Gunning Mix Selection and Rebound Control — Repair Durability
- Ceramic Welding and Hot Patching — Short-Window Fixes
- External Shell Cooling and Steam Lancing — Temporary Containment Limits
- Partial Reline Installation and Dry-Out Curves — Restart Readiness
- Repair Quality Checks and Acceptance Criteria — Zone Sign-Off
Day 5: Practising the Lining Condition and Repair Register
- Cement Kiln Hot-Spot Case Study — Run or Stop Judgement
- Reformer and Crude Heater Case Study — Repair Method Choice
- Risk Ranking of Lining Zones — Turnaround Scope Priorities
- Repair History and Cost Logging — Lining Strategy Feedback
- Lining Condition and Repair Register — Unit Sign-Off Pack
Applying Refractory Lining Inspection and Hot Repair After the Course
- Set up a fixed infrared scanning route and alarm bands for one furnace or kiln, and trend the first month of readings.
- Code every known damaged zone on one unit, rank it by shell risk and agree repair methods with the planner.
Refractory Lining Inspection and Hot Repair Questions (FAQ)
What is refractory lining inspection and hot repair, and why does it matter now?
It is the practice of judging lining condition while units run and fixing damage without a full shutdown. It matters now because longer runs leave less room for unplanned stops.
Which roles gain most from refractory lining inspection and hot repair skills?
Integrity engineers, shell inspectors and maintenance planners gain most. Process engineers and gunning supervisors also benefit, since they share run-or-stop calls on hot spots.
How does refractory lining inspection and hot repair differ from a refractory selection and installation course?
This course starts after the lining is in service. A selection and installation course covers material choice, design and first dry-out; here you focus on reading damage, estimating remaining life and choosing hot or partial repairs.
What do you bring back from refractory lining inspection and hot repair training?
You bring back a ranked view of lining risk for your own unit, a scanning route with alarm bands and a register your planners can keep updating.
Refractory Lining Inspection and Hot Repair: The Way Forward
The lining condition and repair register gives each unit one record of damage zones, repair history and remaining life. Its first use is deciding which zones enter the next turnaround scope, and inspectors, planners and production managers all read from it. After the first outage, revisit the alarm bands and wear rates against what the opened lining actually showed.
Find more Maintenance, Reliability & Asset Integrity Training Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 14 – 18 December 2026 in Dar es Salaam. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Dar es Salaam, Manama, Doha, Amsterdam, Paris, Kuala Lumpur, Barcelona, Rome, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 25 – 29 April 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.