Smart Energy Digitalisation and AI Training Course
For energy managers, utility engineers and digital leads: forecast load with AI, score asset health and plan grid and data platform investments in phases.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 30 November – 4 December 2026 in Milan. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Milan
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
What does this course cover?
Smart Energy Digitalisation and AI is a 1-week training course for energy managers, utility engineers and digital transformation leads who must modernise grids, plants and networks and set out an energy digitalisation roadmap for their operation. Rising renewable shares, two-way power flows and ageing transformers now demand faster forecasting and condition-based intervention than manual methods allow. Jupiter Prime Training delivers this course for leaders steering generation, transmission and distribution assets into a data-driven era.
Why Smart Energy Digitalisation and AI Matters Now
Three forces reshape energy operations: variable solar and wind output that complicates balancing, consumers with rooftop panels, batteries and electric vehicles who both draw and export power, and asset fleets approaching end of design life. Operators that digitalise well forecast load precisely, defer capital spending through condition-based maintenance and cut outage minutes; those that delay face curtailment, emergency repairs and frustrated customers. Where AI forecasts and asset scores drive dispatch or repair, the course applies ISO/IEC 42001, the AI management system standard, and the NIST AI Risk Management Framework (NIST AI RMF) to keep models accountable.
Who Gains Most from Smart Energy Digitalisation and AI
- Energy and plant managers who balance generation, storage and demand across sites
- Transmission and distribution engineers who plan network reinforcement and outage response
- Asset managers who decide inspection intervals, refurbishment and replacement
- Digital transformation leads who run SCADA, metering and analytics programmes of change
- Commercial and trading staff who rely on load and price forecasts
Utilities and large energy users gain most when operations, asset and digital leads attend together, because a roadmap only works when control-room needs, field realities and data platforms are planned as one.
Smart Energy Digitalisation and AI Capabilities
Participants leave able to connect grid physics, asset condition and data architecture in one investment sequence.
- Assess grid digitalisation maturity across SCADA, metering and field devices — executive investment boards
- Build short-term load and renewable output forecasts with machine learning — dispatch and trading desks
- Apply asset health indices and failure prediction to transformers and turbines — maintenance planners
- Design an energy data platform with historian, metering and GIS integration — IT and OT architects
- Weigh demand response, storage and network reinforcement options — planning engineers
- Communicate a phased digitalisation roadmap with benefits and cyber controls — boards and regulators' liaison staff
Key Smart Energy Digitalisation and AI Terms
- Smart grid — an electricity network using sensors, communications and automation to balance supply and demand and isolate faults quickly.
- Advanced metering infrastructure — smart meters and communications that record consumption at short intervals and support remote reading and control.
- Asset health index — a score combining condition data, age and loading to rank equipment by likelihood of failure.
- Demand response — programmes that shift or reduce customer consumption at peak times in exchange for incentives.
- Distributed energy resources — small generation and storage units such as rooftop solar and batteries connected near consumers.
- Digital twin — a live software model of a plant or network fed by sensor data to test scenarios before acting.
Smart Energy Digitalisation and AI Day by Day
Day 1: The Changing Energy System
- Renewable Intermittency and Balancing — Why Forecast Accuracy Now Matters
- Prosumers, Batteries and Electric Vehicles — Two-Way Power Flows
- Ageing Asset Fleets — Replacement Pressure and Capital Constraints
- Digitalisation Maturity Assessment — SCADA, Metering and Field Devices
- Sector Comparisons — Power Utilities and Industrial Energy Users
Day 2: Smart Grids and Metering
- Advanced Metering Infrastructure — Interval Data and Remote Operations
- Distribution Automation and Fault Isolation — Shortening Outage Minutes
- Demand Response Programmes — Shaving Peaks Without New Plant
- Distributed Energy Resource Management — Hosting Capacity Decisions
- OT Cyber Security Controls — Protecting Substations and Control Rooms
Day 3: AI Forecasting for Load and Renewables
- Load Forecasting with Gradient Boosting — Weather, Calendar and Tariff Drivers
- Solar and Wind Output Prediction — Nowcasting for Dispatch
- Price and Imbalance Forecasts — Supporting Trading Decisions
- Forecast Error Metrics — MAPE, Bias and Peak Accuracy
- NIST AI RMF Checks for Forecast Models — Drift and Accountability
Day 4: Predictive Asset Care and Data Platforms
- Asset Health Indices — Transformers, Cables and Rotating Plant
- Dissolved Gas and Vibration Analytics — Early Failure Signatures
- Digital Twins of Plants and Feeders — Testing Interventions Virtually
- Energy Data Platform Design — Historians, GIS and Meter Data Integration
- IT and OT Convergence — Ownership and Interface Rules
Day 5: Practising the Energy Digitalisation Roadmap
- Maturity Baseline for the Case Operation — Applying Day 1 Assessment
- Grid and Metering Priorities — Applying Day 2 Options
- Forecasting and Asset Analytics Use Cases — Applying Days 3 and 4
- Benefits Case and Phasing — Capital Deferral, Outage and Fuel Savings
- Energy Digitalisation Roadmap — Final Phased Plan for Board Approval
Applying Smart Energy Digitalisation and AI After the Course
- Benchmark the current day-ahead load forecast against a gradient boosting model using one year of meter and weather data.
- Calculate asset health indices for the transformer fleet and propose a revised inspection and refurbishment sequence.
Smart Energy Digitalisation and AI Questions (FAQ)
What is smart energy digitalisation and AI, and why does it matter now?
It is the use of sensors, data platforms and AI models to run grids and plants more precisely. It matters now because variable renewables, two-way power flows and ageing assets make manual forecasting and time-based maintenance too slow and costly.
Which roles gain most from smart energy digitalisation and AI?
Energy and plant managers, network engineers, asset managers, digital transformation leads and trading staff gain most. Each depends on forecasts, asset scores or platform data, so a shared roadmap aligns investments across control room and field.
How does smart energy digitalisation and AI differ from an electrical engineering AI and IoT course?
It takes a management view across the whole energy operation. You prioritise grid, forecasting, asset and platform investments in a roadmap, while an engineering course concentrates on device-level sensing, protection settings and circuit design.
What do you bring back from smart energy digitalisation and AI training?
You bring back a phased roadmap for a real operation, covering maturity baseline, priority use cases, platform design and a benefits case. It gives your board a clear sequence for digital investment.
Smart Energy Digitalisation and AI: The Way Forward
The energy digitalisation roadmap first informs which digital investments enter next year's capital plan. Energy managers use it to sequence projects, asset managers to shift towards condition-based work, and digital leads to scope platforms. After the first forecasting and asset analytics releases, revisit the benefits case, since measured error reductions and deferred replacements often reorder later phases.
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
Find more AI Courses for Managers and Professionals by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 30 November – 4 December 2026 in Milan. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Milan, Dubai, Geneva, Cairo, Istanbul, Amman, Kuala Lumpur, Abu Dhabi, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 11 – 15 July 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.