Subsea and Marine Design, Operation and Maintenance Training Course
Seabed hardware, riser, pipeline and marine structure training for engineers who design, run, inspect and repair subsea assets.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Amsterdam. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Amsterdam
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
May 2027
June 2027
July 2027
August 2027
September 2027
October 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Subsea and Marine Design, Operation and Maintenance is a 1-week training course for subsea and marine engineers who specify, run and look after seabed production hardware, risers, flowlines and moored or fixed structures, and it ends with a subsea field care plan for one asset. Ageing tiebacks, deeper water and leaner vessel budgets make every dive and ROV day count. Jupiter Prime Training delivers this lifecycle view of subsea and marine systems.
Why Subsea and Marine Design, Operation and Maintenance Matters Now
Operators run trees, manifolds and umbilicals well past their first design life, so design assumptions must be checked against real fatigue and wall loss. Scarce vessel and ROV spreads reward campaigns planned around risk, not calendar. Offshore wind now shares the seabed, adding cable and scour problems. An organisation that links design data to inspection findings avoids unplanned shut-ins; one that does not inherits leaks and emergency repairs. The course draws on recognised industry practice for risers and cathodic protection.
Who Gains Most from Subsea and Marine Design, Operation and Maintenance
- Engineers responsible for the layout and specification of trees, manifolds, jumpers and umbilicals
- Engineers who own riser, flowline and export pipeline condition and fitness for service
- Marine engineers who look after jackets, mooring lines, buoys and offshore wind foundations
- Operations engineers who manage flow assurance, start-up and shutdown of seabed equipment
- Inspection and intervention engineers who scope ROV, diving and vessel campaigns
An asset team gains most when its design, operations and inspection engineers attend together.
Subsea and Marine Design, Operation and Maintenance Capabilities
Participants follow a seabed asset from concept layout through daily running to repair.
- Specify field architecture, tieback distance and equipment selection for a seabed development — concept select decisions
- Assess riser and free-span fatigue against wave, current and vortex-induced vibration loading — integrity engineers
- Design cathodic protection and coating systems with anode depletion checks — life-extension cases
- Apply flow assurance limits for hydrates, wax and erosion during start-up and shutdown — control room operators
- Build risk-based ROV and vessel inspection campaigns — operations managers and budget holders
- Weigh repair, clamp, bypass or replacement options after a defect — intervention planning
Key Subsea and Marine Design, Operation and Maintenance Terms
- Subsea tieback — a seabed development linked by flowlines and umbilicals to an existing host platform or onshore plant.
- Umbilical — a bundled line carrying hydraulic fluid, chemicals, power and signals from host to seabed equipment.
- Vortex-induced vibration — oscillation of a riser or pipeline span caused by vortices shed in passing current.
- Sacrificial anode — a block of more reactive metal that corrodes in place of the steel structure it protects.
- Free span — a length of pipeline left unsupported above the seabed through scour or uneven ground.
- Remotely operated vehicle (ROV) — a tethered underwater robot used for survey, inspection and light intervention tasks.
Subsea and Marine Design, Operation and Maintenance Day by Day
Day 1: Seabed Field Architecture and Marine Context
- Tieback, Template and Cluster Layouts — Choosing Field Architecture
- Trees, Manifolds, Jumpers and Umbilicals — Equipment Roles in Production
- Metocean Data and Seabed Survey — Design Loads and Routing
- Fixed Jackets, Floating Units and Moorings — Structure Selection by Water Depth
- Shared Seabed With Offshore Wind Cables — Interface and Crossing Decisions
Day 2: Designing Risers, Pipelines and Structures
- Rigid, Flexible and Steel Catenary Risers — Riser Concept Trade-Offs
- Wall Thickness and On-Bottom Stability — Pipeline Sizing Choices
- Vortex-Induced Vibration and Free-Span Screening — Fatigue Life Limits
- Mooring Line Design and Fatigue — Station-Keeping Reliability
- Cathodic Protection and Coating Design — Corrosion Allowance Over Field Life
Day 3: Running Seabed Systems Day to Day
- Hydrate, Wax and Sand Management — Flow Assurance Operating Envelope
- Start-Up, Shutdown and Cool-Down Sequences — Safe Production Restarts
- Subsea Control System Monitoring — Early Warning of Valve and Sensor Faults
- Chemical Injection and Umbilical Health — Treatment Delivery Assurance
- Operating Limits and Barrier Status Reporting — Host Platform Decisions
Day 4: Inspection, Repair and Intervention Planning
- ROV General and Close Visual Inspection — Defect Detection Scope
- Anode Potential Surveys and Wall Loss Measurement — Remaining Life Estimates
- Risk-Based Inspection Intervals for Seabed Assets — Vessel Campaign Priorities
- Clamps, Hot Taps and Spool Replacement — Repair Method Selection
- Diving Versus ROV Versus Light Well Intervention — Spread and Cost Choice
Day 5: Practising the Subsea Field Care Plan
- Architecture Review of a Participant Field — Applying Day One Layouts
- Riser and Span Fatigue Check — Applying Day Two Screening
- Flow Assurance and Restart Envelope — Applying Day Three Limits
- Peer Challenge of the Inspection Campaign — Defending Vessel Priorities
- Subsea Field Care Plan — Design Basis, Operating Limits and Campaign Schedule
Applying Subsea and Marine Design, Operation and Maintenance After the Course
- Compare the latest anode survey of one structure with its cathodic protection design life.
- Rank one field's seabed assets by failure risk and redraft the next ROV campaign scope.
Subsea and Marine Design, Operation and Maintenance Questions (FAQ)
What is subsea and marine design, operation and maintenance, and why does it matter now?
It is the engineering of seabed production hardware, risers, pipelines and marine structures across their whole life. Longer field lives and costly vessel time make linking design, running and repair decisive.
Which roles gain most from subsea and marine design, operation and maintenance?
Subsea, pipeline and marine structural engineers gain most, followed by operations and inspection engineers.
How does subsea and marine design, operation and maintenance differ from a floating production integrity course?
It covers seabed field architecture, risers, moorings and day-to-day running as well as repair. A floating production integrity course centres on the hull and topsides of one vessel rather than the seabed system.
What do you bring back from subsea and marine design, operation and maintenance?
You bring back a plan for one real field that ties its design basis to operating limits and inspection campaigns.
Subsea and Marine Design, Operation and Maintenance: The Way Forward
The subsea field care plan first informs which seabed assets enter the next vessel campaign and which can wait. Subsea engineers, operations supervisors and marine planners use it to agree priorities and budgets. After its first use, revisit the cathodic protection and fatigue assumptions: they shift as anodes deplete and as new tiebacks change the loads on shared risers.
Find more Maintenance, Reliability & Asset Integrity Training Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 23 – 27 November 2026 in Amsterdam. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Amsterdam, Paris, Geneva, Manama, Dar es Salaam, Milan, Sharm El-Sheikh, Cairo, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 21 – 25 March 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.