Skip to content

Transformer-Rectifier Maintenance and Fault Analysis Training Course

Inspect, test and fault-trace thyristor and diode rectifiers for cathodic protection and DC drives, for electrical technicians and engineers.

This 1-week course has 25 dates from November 2026 to October 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Paris. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Paris
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

November 2026

December 2026

January 2027

February 2027

March 2027

April 2027

May 2027

June 2027

July 2027

August 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Transformer-Rectifier Maintenance and Fault Analysis is a 1-week training course for electrical maintenance technicians and engineers who keep thyristor and diode rectifier units delivering stable DC, and it produces a rectifier fault-tracing flowchart for each unit type. Cathodic protection systems, electrolysis cells and DC drives all fail quietly when a rectifier drifts, so disciplined inspection protects pipelines, plant and output. Jupiter Prime Training delivers this Transformer-Rectifier Maintenance and Fault Analysis course.

Why Transformer-Rectifier Maintenance and Fault Analysis Matters Now

Three forces shape rectifier care today. Buried pipelines and tank farms depend on transformer-rectifier units running unattended for years. Variable-speed DC drives push more harmonic current into site networks, stressing transformers and capacitors. Remote monitoring units now report output voltage and current, yet many crews still fault-find by swapping boards. Sites that maintain rectifiers well keep protection potentials steady and drives available; sites that neglect them face corrosion damage and unplanned stops. The course rests on power electronics fundamentals, harmonic distortion limits expressed as total harmonic distortion (THD) and structured fault isolation.

Who Gains Most from Transformer-Rectifier Maintenance and Fault Analysis

  • Electrical technicians who inspect rectifier cabinets, cooling and terminations
  • Corrosion technicians who adjust cathodic protection rectifier outputs after surveys
  • Drive maintainers who look after thyristor converters on DC motors
  • Electrical engineers who approve repairs and specify replacement rectifier units
  • Instrument technicians who maintain firing boards and remote monitoring links

Electrical sections that send a technician, a corrosion specialist and an engineer together gain most.

Transformer-Rectifier Maintenance and Fault Analysis Capabilities

Participants trace a missing phase, a failed thyristor or a drifting firing angle with test instruments.

  • Test diodes, thyristors and snubber components — repair or replace decisions
  • Assess oil-cooled and air-cooled rectifier thermal condition — maintenance planners
  • Apply firing circuit and gate pulse checks to restore balanced output — drive owners
  • Calculate output ripple and harmonic effects on supply transformers — electrical engineers
  • Build fault-tracing sequences for cathodic protection and DC drive rectifiers — corrosion and drive teams
  • Specify inspection intervals from unit criticality and service history — asset owners

Key Transformer-Rectifier Maintenance and Fault Analysis Terms

  • Transformer-rectifier unit (TRU) — a transformer and rectifier bridge in one cabinet that converts AC supply to controlled DC output.
  • Thyristor — a semiconductor switch that conducts once its gate receives a pulse, allowing output voltage to be controlled.
  • Firing angle — the delay between the AC zero crossing and the gate pulse, setting the DC output level.
  • Ripple — the AC component left on the DC output, rising when a bridge leg or filter fails.
  • Snubber circuit — a resistor and capacitor network that limits voltage spikes across semiconductor devices.
  • Total harmonic distortion (THD) — a measure of how far a current or voltage waveform departs from a pure sine wave.

Transformer-Rectifier Maintenance and Fault Analysis Day by Day

Day 1: Rectifier Duties and Failure Context

  • Diode and Thyristor Bridge Topologies — Matching Rectifier Design to DC Duty
  • Cathodic Protection Rectifier Service Conditions — Anticipating Environmental and Load Stress
  • DC Drive Converter Duty Cycles — Linking Load Profile to Component Wear
  • Rectifier Failure Records by Component — Ranking Cabinet Weak Points
  • Electrical Isolation and Discharge Procedures — Making Rectifier Cabinets Safe to Open

Day 2: Inspection and Cooling

  • Visual and Thermographic Cabinet Inspection — Spotting Hot Joints and Degraded Insulation
  • Oil-Cooled Transformer Tank Checks — Deciding Oil Sampling and Filtering
  • Air-Cooled Heat Sink and Fan Maintenance — Preventing Thermal Runaway in Devices
  • Surge Arrester and Fuse Condition Checks — Protecting Bridges From Line Transients
  • Inspection Interval Setting by Criticality — Allocating Technician Time Across Units

Day 3: Semiconductor and Firing Circuit Testing

  • Diode and Thyristor Static Tests — Identifying Shorted or Open Devices
  • Gate Pulse Measurement With Oscilloscopes — Confirming Firing Board Health
  • Snubber and Filter Capacitor Testing — Restoring Ripple to Acceptable Levels
  • Current Sharing Across Parallel Devices — Detecting Uneven Bridge Loading
  • Control Loop and Setpoint Verification — Correcting Output Drift and Hunting

Day 4: Harmonics and Fault Isolation

  • Output Waveform Signatures — Pinpointing Missing Phases and Failed Bridge Legs
  • Harmonic Measurement on Supply Side — Assessing Transformer and Capacitor Stress
  • Cathodic Protection Output Anomalies — Separating Rectifier Faults From Groundbed Faults
  • DC Drive Converter Trips — Tracing Overcurrent and Commutation Failures
  • Remote Monitoring Unit Alarms — Prioritising Field Visits by Fault Type

Day 5: Practising the Rectifier Fault-Tracing Flowchart

  • Case Study From a Pipeline Protection Station — Applying Output and Waveform Evidence
  • Case Study From a Steel Mill DC Drive — Applying Firing and Harmonic Checks
  • Repair, Rewind or Replace Decision Drill — Weighing Downtime Against Unit Age
  • Maintenance Record and Spares Listing — Turning Findings Into Stocked Parts
  • Rectifier Fault-Tracing Flowchart Build — Completing a Unit-Specific Diagnostic Sequence

Applying Transformer-Rectifier Maintenance and Fault Analysis After the Course

  • Lead a thermographic and waveform survey of the site's most critical rectifier units.
  • Run a firing circuit and snubber check on one DC drive converter and record baseline readings.

Transformer-Rectifier Maintenance and Fault Analysis Questions (FAQ)

What is transformer-rectifier maintenance and fault analysis and why does it matter now?

It is the inspection, testing and fault tracing of units that convert AC to controlled DC. It matters now because cathodic protection and DC drives depend on rectifiers that often run unattended, and silent failures cause corrosion damage or lost production.

Which roles gain most from transformer-rectifier maintenance and fault analysis?

Electrical technicians, corrosion technicians and drive maintainers gain most.

How does transformer-rectifier maintenance and fault analysis differ from a UPS or battery charger course?

It centres on industrial DC supplies for cathodic protection and drives. UPS and battery charger courses focus on standby power for critical loads, while this course covers heavy-duty bridges, harmonics and protection outputs.

What do you bring back from transformer-rectifier maintenance and fault analysis?

You bring back a fault-tracing flowchart for a rectifier type you maintain, linking symptoms, test points and likely failed components.

Transformer-Rectifier Maintenance and Fault Analysis: The Way Forward

The rectifier fault-tracing flowchart first informs the call on whether a unit with falling output needs a device change, a firing board or a groundbed check. Technicians use it in the field, engineers use it to approve repairs, and storekeepers use it to stock spares. After its first use, revisit it whenever a new rectifier model enters service.

Questions about dates, fees and booking

When does this course next run?

The next session runs 23 – 27 November 2026 in Paris. It is one of 25 dates scheduled up to October 2027.

Where is this course held?

In a classroom in 24 cities: Paris, London, Barcelona, Kuala Lumpur, Rome, Amman, Amsterdam, Sharm El-Sheikh, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 5 – 9 September 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train