Skip to content

Turbine-Driven Pump and Compressor Train Troubleshooting Training Course

For rotating equipment engineers who must find the true cause of vibration, seal, bearing and control faults on turbine-driven trains and stop repeat failures.

This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 28 December 2026 – 1 January 2027 in Paris. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Paris
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

December 2026

January 2027

February 2027

March 2027

April 2027

May 2027

June 2027

July 2027

August 2027

September 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Turbine-Driven Pump and Compressor Train Troubleshooting is a 1-week training course for rotating equipment engineers who diagnose recurring faults on steam and gas turbine drives and the pumps and compressors they power, ending with a train fault diagnosis dossier. Unplanned trips on these trains halt whole process units, so faster, evidence-based fault finding protects throughput and safety. Jupiter Prime Training delivers this subject for reliability teams.

Why Turbine-Driven Pump and Compressor Train Troubleshooting Matters Now

Ageing turbine drives, leaner maintenance crews and longer intervals between turnarounds mean engineers must find the true cause of a fault the first time. Continuous condition monitoring data is often ignored in favour of swapping parts. A train that is diagnosed well returns to service sooner and stops repeating the same failure; one diagnosed badly suffers repeat seal leaks, bearing wipes and governor hunting. The course rests on vibration spectrum interpretation, the shaft centreline approach to bearing behaviour and structured root cause analysis (RCA).

Who Gains Most from Turbine-Driven Pump and Compressor Train Troubleshooting

  • Engineers responsible for diagnosing vibration and bearing faults on driven trains
  • Specialists who own mechanical seal and dry gas seal reliability
  • Planners who scope repairs and overhauls after a train trip
  • Condition monitoring analysts who interpret spectra and orbit plots
  • Shift engineers who decide whether a train runs, slows or stops

Reliability groups gain most when the condition monitoring analyst, the rotating equipment engineer and the repair planner attend together and agree one diagnostic routine.

Turbine-Driven Pump and Compressor Train Troubleshooting Capabilities

Participants move from symptom to verified cause across the turbine, the coupling and the driven machine.

  • Interpret vibration spectra, orbits and phase readings — run or stop decisions on a train
  • Test governor, trip and overspeed behaviour against expected response — operations supervisors
  • Assess pump cavitation, recirculation and off-curve running — process engineers setting duty points
  • Specify corrections for misalignment, soft foot and thermal growth — millwright and repair crews
  • Weigh seal and bearing failure evidence to isolate the root cause — reliability leads
  • Build a fault diagnosis record that prevents repeat failures — maintenance planners

Key Turbine-Driven Pump and Compressor Train Troubleshooting Terms

  • Driven train — the turbine, coupling, gearbox and pump or compressor running as one connected machine string.
  • Orbit plot — a trace of shaft centre movement inside a bearing, built from two proximity probes set at right angles.
  • Surge — flow reversal in a centrifugal compressor when operating flow drops below a stable limit, causing violent pressure swings.
  • Oil whirl — a sub-synchronous instability in sleeve bearings where the oil film drives the shaft at just under half running speed.
  • Thermal growth — the change in shaft height and position as casings heat to operating temperature, altering cold alignment.
  • Failure mode — the specific way a component fails, such as seal face heat checking or bearing babbitt fatigue.

Turbine-Driven Pump and Compressor Train Troubleshooting Day by Day

Day 1: Train Behaviour and Failure Patterns

  • Train Layout and Coupling Arrangements — Where Faults Transfer Between Machines
  • Steam and Gas Turbine Drive Characteristics — Speed Control Expectations
  • Pump and Compressor Performance Curves — Recognising Off-Design Running
  • Failure History and Bad Actor Lists — Choosing Which Trains to Target
  • Symptom to Cause Mapping — Structuring the First Field Visit

Day 2: Vibration and Bearing Diagnostics

  • Spectrum Analysis of Unbalance and Looseness — Balancing or Repair Decision
  • Orbit, Phase and Shaft Centreline Readings — Bearing Condition Judgement
  • Oil Whirl and Rub Signatures — Bearing Clearance Corrections
  • Lubrication Oil Analysis — Contamination and Wear Source Tracing
  • Thrust Bearing Temperature Trends — Axial Load Problem Isolation

Day 3: Seals, Alignment and Turbine Controls

  • Mechanical Seal Face Inspection — Seal Plan and Flush Corrections
  • Dry Gas Seal Leakage Trends — Compressor Seal Replacement Timing
  • Laser Alignment and Soft Foot Checks — Hot Alignment Targets
  • Governor and Trip Valve Testing — Overspeed Protection Confidence
  • Steam Quality and Blade Deposit Effects — Turbine Wash or Overhaul

Day 4: Process-Side Faults and Root Cause

  • Cavitation and Suction Recirculation — Pump Minimum Flow Settings
  • Compressor Surge and Fouling Symptoms — Anti-Surge Response Review
  • Piping Strain and Foundation Faults — Baseplate and Support Repairs
  • Five Whys and Fault Tree Analysis — Verified Root Cause Statements
  • Repair Scope and Spares Selection — Overhaul Versus Targeted Fix

Day 5: Practising the Train Fault Diagnosis Dossier

  • Refinery Feed Pump Case Study — Applying Vibration and Seal Evidence
  • Gas Plant Compressor Trip Case Study — Applying Control and Surge Findings
  • Alignment and Bearing Correction Plan — Applying Field Measurements
  • Repeat Failure Prevention Actions — Assigning Owners and Checks
  • Train Fault Diagnosis Dossier — Completing and Presenting the Record

Applying Turbine-Driven Pump and Compressor Train Troubleshooting After the Course

  • Lead a vibration and orbit review of the worst-performing turbine-driven train and agree a corrective action list with the condition monitoring analyst.
  • Run a fault tree session on the most recent seal or bearing failure and record the verified root cause and prevention actions.

Turbine-Driven Pump and Compressor Train Troubleshooting Questions (FAQ)

What is Turbine-Driven Pump and Compressor Train Troubleshooting and why does it matter now?

It is the structured diagnosis of faults across a turbine drive and the pump or compressor it powers. It matters now because leaner crews and longer run intervals leave little room for repeat failures or guesswork repairs.

Which roles gain most from Turbine-Driven Pump and Compressor Train Troubleshooting?

Rotating equipment engineers gain most, alongside condition monitoring analysts, seal specialists and repair planners.

How does Turbine-Driven Pump and Compressor Train Troubleshooting differ from an operator principles course?

It focuses on diagnosis and correction rather than basic operation. You learn to read spectra, orbits, seal evidence and control responses to find the true cause.

What do you bring back from Turbine-Driven Pump and Compressor Train Troubleshooting?

You bring back a completed fault diagnosis record for a train case and a repeatable diagnostic routine for your reliability group.

Turbine-Driven Pump and Compressor Train Troubleshooting: The Way Forward

The train fault diagnosis dossier gives reliability groups one record of symptoms, measurements, verified cause and corrective actions. Its first use is deciding whether a troubled train needs a targeted fix or a full overhaul. Rotating equipment engineers, planners and shift engineers all draw on it. After the first repair, revisit it to confirm the fault has not returned.

Questions about dates, fees and booking

When does this course next run?

The next session runs 28 December 2026 – 1 January 2027 in Paris. It is one of 25 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 24 cities: Paris, Sharm El-Sheikh, Milan, Dubai, New York, Dar es Salaam, Rome, Cairo, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 14 – 18 March 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train