Water Meter Calibration and Assembly Training Course
For utility meter shop technicians: rebuild mechanical and electromagnetic meters, run bench flow tests and keep traceable accuracy records.
This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 20 – 24 December 2026 in Istanbul. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Istanbul
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
December 2026
January 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
September 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Water Meter Calibration and Assembly is a 1-week training course for utility meter shop technicians who strip, rebuild and bench-test customer and bulk meters, ending with a meter bench calibration record for one batch of serviced meters. Accurate meters sit at the heart of non-revenue water control. Jupiter Prime Training runs this course for technicians who keep meters honest.
Why Water Meter Calibration and Assembly Matters Now
Three pressures shape meter servicing today. Utilities are chasing non-revenue water, and under-registering meters are one of its quiet causes. Meter fleets are shifting from mechanical to electromagnetic and ultrasonic designs. And customers increasingly dispute bills, which means every repaired meter needs a traceable accuracy history. A utility that calibrates well recovers billed volume and defends its readings; one that does not loses income and credibility. The course rests on internationally recognised practice for water meter accuracy classes and test points, described in general terms.
Who Gains Most from Water Meter Calibration and Assembly
- Technicians who dismantle, clean and reassemble mechanical meter registers and measuring chambers
- Bench operators who run flow tests and record error readings on calibration rigs
- Instrument technicians who configure and check electromagnetic flow meters on bulk supplies
- Meter shop leads who decide whether a meter is repaired, recalibrated or scrapped
- Field metering staff who return suspect meters and reinstall verified units
A meter shop gains most when its bench operators and the lead who signs off scrap decisions attend together.
Water Meter Calibration and Assembly Capabilities
Participants move from a dismantled meter on the bench to a verified unit with a documented error curve.
- Assemble single-jet, multi-jet and volumetric meters — the repair decision
- Specify the test flow rates and volumes for each meter size — the bench operator
- Test meters on a gravimetric or reference-meter bench and record errors — the accuracy sign-off
- Calculate percentage error and plot calibration error curves — the adjust-or-scrap call
- Apply configuration and zero checks to electromagnetic meters — the bulk supply engineer
- Build a meter accuracy record — the billing dispute team
Key Water Meter Calibration and Assembly Terms
- Starting flow — the lowest flow at which a meter begins to register movement.
- Minimum, transitional and permanent flow — the three test points that define a meter's accuracy zones across its working range.
- Error curve — a plot of percentage error against flow rate.
- Maximum permissible error — the error limit a meter must stay within at each flow zone to pass.
- Gravimetric test bench — a rig that weighs the water passed through a meter.
- Electromagnetic meter — a meter with no moving parts that measures flow from the voltage induced in water crossing a magnetic field.
Water Meter Calibration and Assembly Day by Day
Day 1: Meter Types and Construction
- Single-Jet and Multi-Jet Velocity Meters — Choosing Domestic Meter Designs
- Volumetric Piston Meters — Low-Flow Sensitivity Versus Water Quality Limits
- Woltmann Bulk Meters — Sizing for Commercial and District Supplies
- Electromagnetic and Ultrasonic Meters — Static Measurement in Bulk Networks
- Under-Registration Causes — Linking Meter Faults to Non-Revenue Water
Day 2: Dismantling and Assembly
- Strip-Down Sequence and Parts Inspection — Repair or Replace Decision
- Measuring Chamber and Impeller Wear — Effect on Low-Flow Accuracy
- Register Gear Trains and Magnetic Couplings — Reading Integrity After Rebuild
- Seals, Strainers and Tamper Protection — Leak-Free and Secure Reassembly
- Regulating Screw and Bypass Adjustment — Pre-Test Setting of Mechanical Meters
Day 3: Test Benches and Flow Testing
- Gravimetric and Volumetric Reference Methods — Bench Choice for Each Meter Size
- Reference Master Meter Benches — Faster Throughput With Traceable References
- Test Flow Rates and Volumes — Resolution at Starting and Minimum Flow
- Air Removal, Pressure and Temperature Control — Stable Readings on the Rig
- Bench Uncertainty Checks — Confidence in Pass and Fail Results
Day 4: Error Curves and Accuracy Decisions
- Percentage Error Calculation — Reading Meter Against Reference Volume
- Calibration Error Curve Plotting — Spotting Over- and Under-Registration Zones
- Maximum Permissible Error Bands — Pass, Adjust or Scrap Verdict
- Electromagnetic Meter Zero and Span Checks — In-Situ Verification of Bulk Meters
- Meter Accuracy Records and Serial Traceability — Evidence for Billing Disputes
Day 5: Practising the Meter Bench Calibration Record
- Rebuild Exercise — Applying Day 2 Assembly Steps to Returned Meters
- Bench Run Exercise — Applying Day 3 Test Rates to Mixed Sizes
- Error Verdict Exercise — Applying Day 4 Curves to Borderline Meters
- Batch Sampling and Retest Rules — Release of Serviced Meter Lots
- Meter Bench Calibration Record — Completed for One Serviced Batch
Applying Water Meter Calibration and Assembly After the Course
- Audit the meter shop bench against the test flow rates and air-removal steps taught, and correct any gaps
- Plot error curves for a sample of meters returned from the field to find the main under-registration causes
Water Meter Calibration and Assembly Questions (FAQ)
What is water meter calibration and assembly, and why does it matter now?
It is the skill of rebuilding meters and testing them on a bench so they read within permitted error. It matters now because utilities are tackling non-revenue water and billing disputes, and both depend on meters that register accurately.
Which roles gain most from water meter calibration and assembly?
Meter shop technicians and bench operators gain most. They learn to rebuild meters correctly, run flow tests and read error curves.
How does water meter calibration and assembly differ from a flow measurement course?
It centres on servicing customer and bulk water meters at the bench. A broader flow measurement course covers industrial meters, uncertainty budgets and fiscal transfer.
What do you bring back from water meter calibration and assembly?
You bring back a meter bench calibration record for one serviced batch, with error curves and verdicts. You also return with a repeatable rebuild and test sequence your meter shop can adopt.
Water Meter Calibration and Assembly: The Way Forward
The meter bench calibration record lists each serviced meter, its test results, error curve and release verdict. Its first use is deciding whether a batch returns to the network or goes back for rework. After its first use, revisit test volumes and retest rules, as early batches show where bench time is best spent.
Find more Maintenance, Reliability & Asset Integrity Training Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 20 – 24 December 2026 in Istanbul. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Istanbul, Madrid, Amman, Amsterdam, Sharm El-Sheikh, Munich, Dar es Salaam, Milan, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 27 – 31 December 2026, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.