Water Treatment Pumps, Valves and Chlorination Maintenance Training Course
For water treatment plant operators who keep pumps, valves and chlorine dosing equipment reliable so disinfection stays steady and gas handling stays safe.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 22 – 26 November 2026 in Manama. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Manama
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Water Treatment Pumps, Valves and Chlorination Maintenance is a 1-week training course for water treatment plant operators who keep raw water pumps, isolation and control valves and chlorine dosing systems running safely, ending with a plant chlorination and pumping care log. Disinfection depends on steady flow and accurate dosing, so neglected equipment puts drinking water quality and operator safety at risk. Jupiter Prime Training offers this course to treatment plant crews.
Why Water Treatment Pumps, Valves and Chlorination Maintenance Matters Now
Rising demand on treatment works, older pumping stations and tighter limits on residual chlorine leave little margin for equipment that drifts out of tune. Operators now handle more automated dosing loops, yet a sticking valve or a worn diaphragm can still undo the whole disinfection step. A plant that maintains this equipment well holds stable residuals and avoids emergency shutdowns; one that does not faces underdosing, gas leaks and lost supply. The course rests on planned preventive maintenance (PPM), chlorine gas handling practice and contact time (CT) principles for disinfection.
Who Gains Most from Water Treatment Pumps, Valves and Chlorination Maintenance
- Operators who start, stop and inspect raw and treated water pumps each shift
- Staff responsible for chlorine cylinder changes and gas leak response
- Operators who adjust dosing rates against flow and residual readings
- Technicians who repack, lubricate and service plant valves
- Shift leads who log equipment condition and raise repair requests
Plant crews gain most when operators from every shift attend together and agree one routine for dosing checks and equipment care.
Water Treatment Pumps, Valves and Chlorination Maintenance Capabilities
Participants link each pump, valve and chlorinator task to the residual leaving the plant.
- Apply start-up, priming and shutdown routines for centrifugal pumps — shift handover decisions
- Assess gland packing, mechanical seal and bearing condition — repair requests to maintenance
- Test gate, butterfly and check valves for passing and sticking — isolation safety
- Calculate chlorine dose from flow, demand and target residual — water quality supervisors
- Specify safe cylinder change and leak response steps — plant safety officers
- Build an equipment care log that flags drifting performance — plant managers
Key Water Treatment Pumps, Valves and Chlorination Maintenance Terms
- Free chlorine residual — the chlorine left in water after demand is met, available to keep disinfecting through the network.
- Chlorine demand — the amount of chlorine consumed by reactions with organic matter and other substances before a residual forms.
- Contact time — the period water spends in contact with chlorine before reaching the first consumer, set for effective disinfection.
- Vacuum chlorinator — a gas feed device that draws chlorine under vacuum so a line break stops flow rather than leaking.
- Gland packing — braided rings compressed around a pump shaft or valve stem to control leakage.
- Water hammer — a pressure surge caused when flow stops or starts suddenly, often through fast valve closure.
Water Treatment Pumps, Valves and Chlorination Maintenance Day by Day
Day 1: Plant Hydraulics and Equipment Roles
- Treatment Train Flow Path — Where Pumps, Valves and Dosing Sit
- Pump Duty Point and System Curve — Matching Pumps to Demand
- Valve Types and Their Duties — Isolation, Control or Non-Return
- Chlorination Role in Disinfection — Protecting Supply Quality
- Shift Inspection Rounds — Spotting Early Signs of Trouble
Day 2: Pump Operation and Upkeep
- Priming, Start-Up and Shutdown Routines — Avoiding Dry Running
- Gland Packing Adjustment and Repacking — Leakage Control Choices
- Mechanical Seal and Bearing Checks — When to Call Maintenance
- Cavitation and Air Lock Symptoms — Suction Condition Corrections
- Duty and Standby Rotation — Balancing Running Hours
Day 3: Valve Care and Hydraulic Safety
- Gate and Butterfly Valve Servicing — Stem Lubrication and Exercising
- Check Valve and Foot Valve Faults — Backflow Prevention Decisions
- Actuator and Positioner Checks — Control Valve Response
- Slow Closure Practice — Preventing Water Hammer Damage
- Isolation and Lock-Off Steps — Safe Access for Repairs
Day 4: Chlorine Dosing and Gas Handling
- Dose Calculation From Flow and Demand — Setting Feed Rates
- Gas Chlorinator and Hypochlorite Pump Upkeep — Feed Accuracy
- Cylinder and Drum Changeover — Safe Connection Steps
- Leak Detection and Emergency Response — Protecting Staff and Neighbours
- Residual Analysers and Sampling — Confirming Disinfection at Outlet
Day 5: Practising the Chlorination and Pumping Care Log
- Municipal Treatment Works Case — Applying Pump and Valve Checks
- Industrial Process Water Case — Applying Dosing Calculations
- Low Residual Investigation — Tracing Equipment Causes
- Fault Reporting and Spares Requests — Clear Handover to Maintenance
- Chlorination and Pumping Care Log — Completing the Plant Record
Applying Water Treatment Pumps, Valves and Chlorination Maintenance After the Course
- Lead a walk-down of every duty and standby pump and valve on one treatment stream and record packing, seal and stem condition.
- Run a dose check comparing calculated feed rate with analyser residuals across one week and report any drift.
Water Treatment Pumps, Valves and Chlorination Maintenance Questions (FAQ)
What is Water Treatment Pumps, Valves and Chlorination Maintenance and why does it matter now?
It is the routine care of the pumps, valves and chlorine dosing equipment that move and disinfect water. It matters now because ageing stations and tighter residual limits leave little room for equipment faults.
Which roles gain most from Water Treatment Pumps, Valves and Chlorination Maintenance?
Plant operators gain most, along with shift leads, dosing operators and technicians who service pumps and valves on treatment works.
How does Water Treatment Pumps, Valves and Chlorination Maintenance differ from a membrane treatment course?
It centres on mechanical equipment and chlorine dosing rather than membrane processes. You work on pumps, valves and chlorinators instead of filtration performance.
What do you bring back from Water Treatment Pumps, Valves and Chlorination Maintenance?
You bring back a completed equipment care record, dose calculation routines and safe gas handling steps your shift can use at once.
Water Treatment Pumps, Valves and Chlorination Maintenance: The Way Forward
The plant chlorination and pumping care log gives every shift one record of pump, valve and dosing condition. Its first use is deciding which equipment needs repair before it affects the residual. Operators, shift leads and maintenance planners all read it. After its first month, revisit the log to see which checks caught problems early.
Find more Maintenance, Reliability & Asset Integrity Training Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 22 – 26 November 2026 in Manama. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Manama, Istanbul, Milan, Doha, Amman, Dar es Salaam, Vienna, Cairo, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 18 – 22 July 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.