Skip to content

Carbonate Saturation Height and Permeability Training Course

Petrophysicists and reservoir engineers turn carbonate core and logs into rock types, permeability transforms and water saturation inputs for field models.

This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 22 – 26 November 2026 in Dubai. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Dubai
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

November 2026

December 2026

January 2027

February 2027

March 2027

April 2027

May 2027

June 2027

July 2027

August 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Carbonate Saturation Height and Permeability is a 1-week training course for petrophysicists and reservoir engineers who turn core and log measurements into the water saturation and permeability inputs of a static model, closing with a rock-typed saturation height function set. Carbonate pore systems vary sharply over short distances, so volumetrics and well rates hinge on these functions. Jupiter Prime Training delivers this course on carbonate saturation height and permeability.

Why Carbonate Saturation Height and Permeability Matters Now

Asset owners revisit mature limestone and dolomite fields for infill drilling, so oil-in-place estimates are challenged again. Simulation engineers need permeability fields that honour well tests rather than smooth poroperm clouds. A team that links pore types to capillary behaviour books credible volumes and places wells in the right flow units; a team that does not carries hidden bias into every forecast. The course rests on capillary pressure theory, the Leverett J-function and Thomeer hyperbola fitting.

Who Gains Most from Carbonate Saturation Height and Permeability

  • Petrophysicists who calculate water saturation and net pay in vuggy or fractured carbonate wells
  • Reservoir engineers who populate simulation grids with permeability and initial saturation
  • Geomodellers who distribute rock types between wells in limestone and dolomite fields
  • Core analysis specialists who design and quality-check capillary pressure tests
  • Production technologists who reconcile model permeability with well test and logging results

Subsurface asset groups gain most when petrophysicists and reservoir engineers from one field attend together.

Carbonate Saturation Height and Permeability Capabilities

Each capability ties a pore-scale measurement to a number that enters the field model.

  • Classify pore types from thin sections, mercury injection and NMR — the rock type scheme the geomodeller distributes
  • Calculate flow zone indicators and hydraulic units — the permeability transform used in simulation
  • Assess fracture intensity and aperture from image logs and core — the dual-porosity decision
  • Build saturation height functions per rock type — the oil-in-place estimate reported to asset owners
  • Test functions against log saturation and free water level picks — the contact definition in the model
  • Communicate uncertainty ranges in permeability and saturation — the field development decision

Key Carbonate Saturation Height and Permeability Terms

  • Saturation height function — an equation giving water saturation from height above free water level and rock properties.
  • Free water level — the depth where capillary pressure between oil or gas and water is zero.
  • Rock type — a group of rocks with similar pore throat distribution and therefore similar flow and capillary behaviour.
  • Flow zone indicator — a parameter combining porosity and permeability that groups samples into hydraulic units.
  • Mercury injection capillary pressure — a laboratory test measuring pore throat size distribution by forcing mercury into a plug.
  • Vug — a pore larger than surrounding grains, often from dissolution, that may or may not connect to flow paths.

Carbonate Saturation Height and Permeability Day by Day

Day 1: Carbonate Pore Systems and Model Demands

  • Lucia and Choquette-Pray Pore Classifications — Choosing a Scheme for the Field
  • Interparticle, Vuggy and Microporosity — Linking Pore Geometry to Flow
  • Static Model Property Inputs — Defining What Simulation Engineers Need
  • Core-to-Log Depth Matching — Securing Calibration Points Before Interpretation
  • Porosity From Density, Neutron and Sonic — Selecting Matrix Parameters in Dolomite

Day 2: Rock Typing From Core and Logs

  • Mercury Injection Curve Interpretation — Grouping Plugs by Pore Throat Size
  • NMR T2 Distributions — Separating Micro, Meso and Macro Pores
  • Flow Zone Indicator and Hydraulic Units — Building Permeability Transforms per Type
  • Winland R35 Method — Comparing Throat-Based Rock Types With Hydraulic Units
  • Electrofacies Clustering — Extending Rock Types to Uncored Wells

Day 3: Fractures and Permeability Prediction

  • Borehole Image Fracture Picking — Separating Open, Healed and Induced Fractures
  • Fracture Aperture and Intensity Estimates — Judging Contribution to Well Flow
  • Dual-Porosity Screening — Deciding When Fractures Need Their Own Grid
  • Well Test Permeability Thickness — Reconciling Core Permeability With Dynamic Data
  • Permeability Upscaling Choices — Matching Plug Values to Grid Cell Size

Day 4: Saturation Height Modelling

  • Capillary Pressure Conversion to Reservoir Conditions — Correcting Interfacial Tension and Contact Angle
  • Leverett J-Function Fitting — Normalising Curves Across Porosity and Permeability
  • Thomeer Hyperbola Parameters — Describing Bimodal Carbonate Pore Systems
  • Free Water Level and Transition Zone Picks — Setting Contacts From Pressure Gradients
  • Wettability and Imbibition Effects — Judging Saturation Below Original Contacts

Day 5: Practising the Saturation Height Function Set

  • Rock Type Assignment Exercise — Applying Day Two Schemes to a Field Dataset
  • Permeability Transform Calibration — Applying Well Test Checks From Day Three
  • Function Validation Against Log Saturation — Applying Free Water Level Picks
  • Uncertainty Cases for Volumetrics — Framing Low, Mid and High Oil in Place
  • Rock-Typed Saturation Height Function Set — Completing Model-Ready Tables for Hand-Over

Applying Carbonate Saturation Height and Permeability After the Course

  • Re-fit saturation height functions for one field using Thomeer parameters per rock type.
  • Lead a review of permeability transforms against well test permeability thickness on three producing wells.

Carbonate Saturation Height and Permeability Questions (FAQ)

What is carbonate saturation height and permeability modelling, and why does it matter now?

Carbonate saturation height and permeability modelling converts core and log measurements into water saturation and flow properties for each rock type. It matters now because mature carbonate fields are being redeveloped and their volumes and well rates depend on these inputs.

Which roles gain most from carbonate saturation height and permeability training?

Petrophysicists and reservoir engineers gain most from carbonate saturation height and permeability training. Geomodellers and core analysis specialists also benefit.

How does carbonate saturation height and permeability differ from a carbonate facies and diagenesis course?

Carbonate saturation height and permeability focuses on numbers that enter the model, while a facies and diagenesis course explains how pore systems formed.

What do you bring back from carbonate saturation height and permeability training?

You bring back a rock-typed saturation height function set with matching permeability transforms, checked against log saturation and well tests.

Carbonate Saturation Height and Permeability: The Way Forward

The rock-typed saturation height function set first informs the oil-in-place estimate for the next field model update. Petrophysicists maintain it, while reservoir engineers and geomodellers load it into grids. After its first use, revisit the free water level picks against new pressure data, because contact uncertainty often moves volumes more than any curve fit.

Questions about dates, fees and booking

When does this course next run?

The next session runs 22 – 26 November 2026 in Dubai. It is one of 25 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 24 cities: Dubai, Manama, Cairo, Barcelona, New York, Milan, Sharm El-Sheikh, Kuala Lumpur, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 13 – 17 June 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train