Coring and Conventional Core Analysis Training Course
Plan core acquisition, preserve rock integrity and validate routine plug measurements for reservoir engineers, petrophysicists and laboratory staff.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Vienna. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Vienna
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Coring and Conventional Core Analysis is a 1-week training course for reservoir engineers, petrophysicists and core laboratory staff who plan core acquisition and rely on routine core measurements, and it ends with a core data validation dossier for one well. Core remains the only direct physical sample of reservoir rock, so errors in barrel selection, preservation or plug testing travel straight into reserves estimates. The course is delivered by Jupiter Prime Training.
Why Coring and Conventional Core Analysis Matters Now
Three pressures shape core work today. Mature fields need tighter log calibration in thin, heterogeneous intervals. Asset teams expect core porosity, permeability and saturation to arrive screened and ready for simulation. Poor handling wastes costly core that later proves altered or unrepresentative. The course rests on the recommended practices for core analysis published by the industry's professional bodies, described here in general terms.
Who Gains Most from Coring and Conventional Core Analysis
- Specialists who design coring intervals and choose barrel, liner and bit configurations
- Wellsite geologists responsible for core recovery, marking, sampling and preservation
- Petrophysicists who calibrate porosity and saturation logs against plug measurements
- Laboratory technicians who prepare, clean, dry and test core plugs
- Reservoir engineers who load core permeability and rock types into static and dynamic models
Subsurface asset groups gain most when a wellsite geologist, a petrophysicist and a reservoir engineer attend together, since each shapes data the others inherit.
Coring and Conventional Core Analysis Capabilities
Participants move from barrel selection at the rig to defensible plug results that a reservoir model can absorb.
- Specify a coring string, bit and inner-barrel liner for a given lithology — interval selection and rig planning
- Design a wellsite handling and preservation sequence that limits invasion and drying — sample integrity
- Apply helium porosity, gas permeability and Dean-Stark saturation methods correctly — laboratory test scope
- Calculate Klinkenberg-corrected permeability and overburden adjustments — log calibration
- Assess core data quality against flags for damage, contamination and depth shift — data acceptance
- Communicate validated core results to modelling and drilling colleagues — rock typing and future coring
Key Coring and Conventional Core Analysis Terms
- Core barrel — the downhole assembly of outer tube, inner tube and core head that cuts and retains a rock cylinder.
- Core recovery — the length of rock retrieved divided by the length cut, a first indicator of core quality.
- Routine core analysis (RCA) — standard plug measurements of porosity, permeability, grain density and fluid saturation.
- Klinkenberg correction — an adjustment that converts gas permeability to an equivalent liquid permeability by removing gas slippage effects.
- Dean-Stark extraction — a distillation method that measures water and oil volumes in a plug to derive fluid saturations.
- Core-to-log depth shift — the offset applied so core measurements align with wireline log depths before calibration.
Coring and Conventional Core Analysis Day by Day
Day 1: Coring Objectives and Tool Selection
- Core Acquisition Objectives — Which Reservoir Questions Justify Cutting Rock
- Conventional, Sponge and Pressure Core Barrels — Matching Tool to Saturation Needs
- Core Head and Bit Design — Recovery Versus Rate of Penetration
- Inner-Barrel Liners and Jamming Risk — Fragile or Fractured Formations
- Coring Fluid Selection and Tracers — Limiting Filtrate Invasion of Plugs
Day 2: Wellsite Handling and Core Preservation
- Core Retrieval and Tripping Speed — Gas Expansion and Rock Damage
- Core Marking, Orientation Lines and Depth Labels — Traceability to Logs
- Preservation Methods: Wax, Foil, Resin and Freezing — Wettability Retention
- Wellsite Plug Sampling and Gamma Scanning — Early Depth Matching
- Chain-of-Custody and Transport Records — Laboratory Acceptance of Shipments
Day 3: Routine Plug Measurements
- Plug Cutting, Cleaning and Humidity Drying — Protecting Clay-Bound Water
- Helium Pycnometry and Boyle's Law Porosity — Grain Density Checks
- Steady-State Gas Permeability and Klinkenberg Correction — Liquid Equivalents
- Dean-Stark and Retort Saturation Methods — Choosing by Rock and Fluid
- Net Overburden Stress Testing — Converting Results to Reservoir Conditions
Day 4: Core Data Quality Control and Integration
- Laboratory Quality Flags and Repeat Tests — Accepting or Rejecting Plugs
- Core-to-Log Depth Shifting — Reliable Petrophysical Calibration Points
- Porosity-Permeability Transforms — Rock Typing and Flow Unit Definition
- Upscaling Plug Data to Model Cells — Sampling Density and Heterogeneity
- Laboratory Contract Specifications — Test Scope, Turnaround and Reporting Format
Day 5: Practising the Core Data Validation Dossier
- Coring Plan Review for a Case Well — Applying Tool and Fluid Choices
- Preservation and Custody Audit — Applying Wellsite Handling Checks
- Plug Result Screening Exercise — Applying Measurement and Correction Methods
- Core-Calibrated Log Interpretation — Applying Depth Shift and Transforms
- Core Data Validation Dossier — Recommendations for Modelling and Future Coring
Applying Coring and Conventional Core Analysis After the Course
- Audit the latest core dataset against the quality flags and depth-shift method, listing plugs to exclude from log calibration.
- Draft a coring and laboratory specification for the next cored well covering barrel type, preservation method and the routine test suite.
Coring and Conventional Core Analysis Questions (FAQ)
What is coring and conventional core analysis and why does it matter now?
Coring and conventional core analysis is the cutting, preserving and routine testing of reservoir rock. It matters now because thin, mature reservoirs need direct measurements of porosity, permeability and saturation to calibrate logs and models with defensible uncertainty.
Which roles gain most from coring and conventional core analysis training?
Wellsite geologists, petrophysicists, core laboratory technicians and reservoir engineers gain most. You will see how each stage affects results downstream.
How does coring and conventional core analysis differ from a core description course?
This subject centres on tools, preservation and quantitative plug measurements. A core description and sedimentological logging course instead focuses on visual facies interpretation, depositional environments and graphic logs.
What do you bring back from coring and conventional core analysis training?
You bring back a core data validation dossier for one well, with screened plug results, a depth-shift record and recommendations for future coring and laboratory specifications.
Coring and Conventional Core Analysis: The Way Forward
The core data validation dossier first informs which plug results enter log calibration and rock typing. Petrophysicists and reservoir engineers use it to load trusted values into models; laboratory coordinators use it for the next coring run. After its first use, revisit the preservation choices, since altered wettability often explains results that later disagree with production behaviour.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 23 – 27 November 2026 in Vienna. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Vienna, Dubai, Barcelona, Sharm El-Sheikh, Istanbul, Amsterdam, Abu Dhabi, Rome, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 27 June – 1 July 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.