Drilling Rig Equipment Operations and Maintenance Training Course
For rig mechanics, electricians and toolpushers who keep drawworks, top drives, mud pumps, BOP gear and rig power running between moves.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 30 November – 4 December 2026 in Singapore. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Singapore
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
September 2027
October 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Drilling Rig Equipment Operations and Maintenance is a 1-week training course for rig mechanics, rig electricians and toolpushers, and it produces a Rig Equipment Maintenance Calendar. A single drawworks or mud pump failure can halt a well, so equipment care decides how much time the rig earns. Jupiter Prime Training treats drilling rig equipment operations and maintenance as the craft of keeping a rig drilling between moves.
Why Drilling Rig Equipment Operations and Maintenance Matters Now
Three pressures shape rig upkeep today. Operators judge contractors on non-productive time, and equipment downtime is the share a rig crew can directly control. Rigs now carry variable frequency drives, electric top drives and digital monitoring that demand mixed mechanical and electrical skills on every tour. A rig that keeps its equipment in order wins repeat contracts; one that does not loses wells to breakdowns. The course draws on manufacturer service intervals, planned maintenance practice and condition-based inspection principles.
Who Gains Most from Drilling Rig Equipment Operations and Maintenance
- Crew members who service drawworks, brakes, drill lines and crown blocks
- Technicians who maintain top drives, rotary tables and pipe handling gear
- Electrical staff who keep generators, switchgear and drive houses running
- Supervisors who schedule downtime windows and approve rig move readiness
- Crew members who inspect and test well control stacks and accumulators
A rig crew that sends its mechanic, electrician and toolpusher together gains most, because the calendar they build needs all three trades to agree.
Drilling Rig Equipment Operations and Maintenance Capabilities
Participants move from fixing equipment after it stops to scheduling each system around drilling phases and rig moves.
- Assess drawworks brake, drill line and crown block condition — slip-and-cut and replacement decisions
- Apply top drive and rotary inspection routines — torque reliability during connections
- Test mud pump fluid ends, valves and pulsation dampeners — circulation uptime
- Specify generator, switchgear and drive house checks — rig power continuity
- Build a rig move inspection checklist — safe rig-up and early spud
- Calculate maintenance windows around drilling phases — toolpusher scheduling
Key Drilling Rig Equipment Operations and Maintenance Terms
- Drawworks — the hoisting winch that raises and lowers the drill string through the drill line and travelling block.
- Slip-and-Cut — the routine of moving and cutting worn drill line based on accumulated ton-miles of work.
- Top Drive — a motor hung from the derrick that rotates the drill string and allows drilling with full stands.
- Fluid End — the part of a mud pump holding liners, pistons and valves that pressurise drilling fluid.
- Accumulator Unit — the stored hydraulic pressure system that closes blowout preventer rams and annulars on demand.
- Rig Move Checklist — the ordered inspection list completed before lowering, transporting and raising a drilling rig.
Drilling Rig Equipment Operations and Maintenance Day by Day
Day 1: Rig Systems and Downtime Patterns
- Rig System Map — Hoisting, Rotating, Circulating, Power and Well Control
- Downtime Log Review — Which Equipment Stops the Rig Most
- Manufacturer Service Intervals — Running Hours Versus Calendar Triggers
- Tour Handover Sheets — Passing Equipment Condition Between Crews
- Spare Parts Criticality — Which Items Must Stay on Location
Day 2: Hoisting and Rotating Equipment
- Drawworks Brake and Clutch Inspection — Stopping Load Safely Every Trip
- Ton-Mile Tracking for Drill Line — Timing Slip-and-Cut Correctly
- Crown and Travelling Block Checks — Sheave Wear and Bearing Life
- Top Drive Gearbox and Pipe Handler Care — Connection Reliability
- Rotary Table and Kelly Bushing Wear — Backup Rotation Readiness
Day 3: Circulating System and Well Control Equipment
- Mud Pump Fluid End Service — Liner, Piston and Valve Replacement
- Pulsation Dampener Precharge Checks — Protecting Pumps and Standpipe
- Solids Control Equipment Upkeep — Shaker Screens and Centrifuge Wear
- BOP Handling and Ram Change Routines — Stack Readiness Between Wells
- Accumulator Pressure Testing — Closing Time Confidence for Well Control
Day 4: Rig Power and Rig Moves
- Diesel Generator Load Sharing — Avoiding Blackouts During Peak Demand
- VFD and SCR Drive House Inspection — Heat, Dust and Fault Codes
- Electrical Isolation and Lockout on Rigs — Safe Access for Repairs
- Rig-Down and Transport Inspection — Damage Found Before Rig-Up
- Derrick and Substructure Visual Checks — Raising Approval After a Move
Day 5: Practising the Rig Equipment Maintenance Calendar
- Downtime Ranking Applied to One Rig — Setting Calendar Priorities
- Hoisting and Pump Task Scheduling — Fitting Work Around Trips
- Power and Well Control Checks Sequenced — Between-Well Windows
- Rig Move Checklist Trial — Peer Walkthrough of Readiness Steps
- Rig Equipment Maintenance Calendar — Final Version for the Toolpusher
Applying Drilling Rig Equipment Operations and Maintenance After the Course
- Run a downtime log review with the rig crew and rank the five systems that stopped drilling most.
- Trial the rig move checklist at the next move and record defects found before rig-up.
Drilling Rig Equipment Operations and Maintenance Questions (FAQ)
What is drilling rig equipment operations and maintenance and why does it matter now?
It is the routine care of a rig's hoisting, rotating, circulating, power and well control systems. It matters now because operators measure contractors on non-productive time and modern rigs mix mechanical and electrical equipment.
Which roles gain most from drilling rig equipment operations and maintenance?
Rig mechanics, rig electricians and toolpushers gain most. You benefit if you service drawworks, mud pumps or top drives or decide when the rig stops for maintenance.
How does drilling rig equipment operations and maintenance differ from a pipeline operations and maintenance course?
A pipeline course deals with fixed lines and pigging. Drilling rig equipment operations and maintenance focuses on mobile hoisting, rotating and circulating machinery that moves between wells and must be serviced around drilling phases.
What do you bring back from drilling rig equipment operations and maintenance training?
You bring back a maintenance calendar for one rig, a rig move checklist and inspection routines for drawworks, top drive, mud pumps, BOP equipment and power from land drilling and geothermal cases.
Drilling Rig Equipment Operations and Maintenance: The Way Forward
The Rig Equipment Maintenance Calendar informs the first scheduling decision on any well: which tasks fit the next trip or between-well window. Toolpushers, mechanics and electricians share it as one view of equipment condition. After the first rig move, revisit the spare parts list and the ton-mile triggers, since actual wear often differs from the planned intervals.
Find more Maintenance, Reliability & Asset Integrity Training Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 30 November – 4 December 2026 in Singapore. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Singapore, Kuala Lumpur, Vienna, Dubai, Rome, Munich, Manama, Amsterdam, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 9 – 13 May 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.