Glycol Dehydration and Amine Unit Troubleshooting Training Course
Practical training for gas plant operators and process engineers on fixing off-spec dew point, glycol losses, sieve breakthrough and amine foaming.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Vienna. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Vienna
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
May 2027
June 2027
July 2027
August 2027
September 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Glycol Dehydration and Amine Unit Troubleshooting is a 1-week training course for gas plant operators and process engineers who keep contactors, regenerators and sieve beds on specification, and it ends with a signed Upset Response Playbook for their own units. Sour feed, tight dew point limits and lean crews make off-spec hours costly. Jupiter Prime Training delivers Glycol Dehydration and Amine Unit Troubleshooting for plant crews.
Why Glycol Dehydration and Amine Unit Troubleshooting Matters Now
Three forces shape this work today. Feed gas from maturing fields carries more carbon dioxide, hydrogen sulphide and free water than the units were sized for. Pipeline and liquefaction buyers enforce strict water and acid gas limits at the custody point. Experienced board operators are retiring faster than their know-how is written down. Early diagnosis of foaming, glycol losses or sieve breakthrough keeps sales gas flowing; guessing burns solvent and energy. The course rests on mass and heat balances, equilibrium water content charts and solvent loading principles.
Who Gains Most from Glycol Dehydration and Amine Unit Troubleshooting
- Control room staff responsible for contactor pressure drop, reboiler duty and lean solvent temperature.
- Field operators who sample glycol and amine, change filters and drain separators.
- Process engineers accountable for unit capacity, solvent health and energy use.
- Shift supervisors who decide when an upset needs a rate cut or a bypass.
- Laboratory staff who run water content, solvent strength and contaminant tests.
A crew sending a board operator, field operator and process engineer from one train gains most.
Glycol Dehydration and Amine Unit Troubleshooting Capabilities
Participants move from reading symptoms on the panel to tracing each one back to a chemical or mechanical root cause.
- Calculate water dew point depression and glycol circulation rate — for the contactor rate decision.
- Assess triethylene glycol purity, pH and contamination — for solvent replacement timing.
- Test amine rich and lean loading against design — for the regenerator steam rate.
- Diagnose foaming, flooding and carryover from pressure drop trends — for the shift supervisor.
- Specify molecular sieve regeneration temperatures and cycle times — for the bed changeout schedule.
- Weigh hydrate inhibitor injection against heating — for the gathering system engineer.
Key Glycol Dehydration and Amine Unit Troubleshooting Terms
- Water dew point — the temperature at a stated pressure at which water first condenses from the gas.
- Lean loading — the moles of acid gas still held per mole of amine after regeneration.
- Stripping gas — dry gas passed through hot glycol to remove extra water.
- Heat stable salts — amine degradation products that do not release in the regenerator and reduce solvent capacity.
- Mass transfer zone — the section of a sieve bed where water is being adsorbed at a given moment.
- Hydrate — an ice-like solid of water and light hydrocarbons that forms at high pressure and low temperature.
Glycol Dehydration and Amine Unit Troubleshooting Day by Day
Day 1: Gas Composition and Hydrate Risk
- Equilibrium Water Content Charts — Setting the Required Dew Point Depression
- Hydrate Formation Curves — Locating Risk Points Along Gathering Lines
- Methanol and Glycol Inhibitor Injection — Choosing Dose Against Heating
- Acid Gas Partial Pressure — Selecting Physical or Chemical Solvent Routes
- Inlet Separator and Slug Catcher Checks — Protecting Downstream Contactors
Day 2: Glycol Contactor and Regeneration Faults
- Glycol Circulation Rate and Tray Loading — Fixing Poor Water Pickup
- Reboiler Temperature and Stripping Gas — Raising Lean Glycol Purity
- Glycol Loss Tracing — Separating Carryover, Vaporisation and Leaks
- Glycol pH, Salts and Hydrocarbon Contamination — Planning Filtration or Reclaim
- Still Column Flooding and Fire Tube Fouling — Deciding Rate Cuts
Day 3: Molecular Sieve Beds and Fractionation Links
- Adsorption Cycle and Breakthrough Curves — Timing Bed Switchovers
- Regeneration Gas Heating and Cooling Steps — Avoiding Bed Damage
- Sieve Dust, Coking and Bed Ageing — Scheduling Changeouts
- Dry Gas Feed to Deethaniser and Depropaniser — Spotting Freezing Signs
- Dew Point Analysers and Moisture Probes — Trusting the Reading
Day 4: Amine Absorber and Regenerator Diagnosis
- Rich and Lean Loading Sampling — Setting Regenerator Steam Rate
- Foaming Tests and Antifoam Dosing — Limiting Solvent Carryover
- Heat Stable Salts and Degradation — Deciding Reclaiming or Bleed
- Rich Amine Corrosion and Velocity Limits — Protecting Exchangers and Piping
- Acid Gas Flash and Reflux Drum Control — Stabilising Downstream Sulphur Units
Day 5: Practising the Upset Response Playbook
- Off-Spec Water Dew Point Case — Applying Contactor and Reboiler Checks
- Sieve Breakthrough Before Cryogenic Section Case — Applying Cycle Analysis
- Amine Foaming at Rate Increase Case — Applying Loading and Antifoam Methods
- Symptom, Cause and Action Matrix — Ranking Responses by Risk
- Upset Response Playbook — Completing Unit-Specific Checklists and Limits
Applying Glycol Dehydration and Amine Unit Troubleshooting After the Course
- Run a glycol loss balance on your own train for one week, splitting losses into carryover, vaporisation and leaks.
- Set up a weekly rich and lean amine loading log with heat stable salt results and trend it against steam use.
Glycol Dehydration and Amine Unit Troubleshooting Questions (FAQ)
What is Glycol Dehydration and Amine Unit Troubleshooting and why does it matter now?
It is tracing off-spec gas, solvent losses and upsets to root causes. Richer acid gas feeds, strict sales limits and thinner crews now leave little room for trial and error.
Which roles gain most from Glycol Dehydration and Amine Unit Troubleshooting?
Board and field operators, process engineers, shift supervisors and laboratory staff gain most, sharing one way to read symptoms and agree corrective action.
How does Glycol Dehydration and Amine Unit Troubleshooting differ from a gas processing design course?
It focuses on fixing faults in running units, not sizing new equipment. A design course chooses solvents and columns; this one works with your existing plant and its trends.
What do you bring back from Glycol Dehydration and Amine Unit Troubleshooting?
You bring back an upset response playbook linking symptoms to causes, confirming checks and crew actions for your own units.
Glycol Dehydration and Amine Unit Troubleshooting: The Way Forward
The Upset Response Playbook first informs how the next off-spec dew point or foaming event is handled on shift. Board operators use it at the panel, field operators at the sample point and process engineers when they review solvent health. After its first real use, revisit the action limits and add symptoms the matrix missed.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 23 – 27 November 2026 in Vienna. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Vienna, Doha, Dubai, New York, Barcelona, Abu Dhabi, Rome, Manama, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 25 – 29 July 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.