Reciprocating Compressor Fault Diagnosis Training Course
Read PV curves, temperatures and vibration to pinpoint valve, ring and rider band faults on running compressors, for operators and engineers.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 23 – 27 November 2026 in Singapore. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Singapore
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Reciprocating Compressor Fault Diagnosis is a 1-week training course for plant operators and maintenance engineers who read running machines and decide when a symptom calls for intervention, and it produces a compressor fault signature chart for each unit. Unplanned compressor trips now cost gas plants and refineries throughput, flaring and emergency repairs, so early, evidence-based diagnosis at the panel has become a core operating skill. Jupiter Prime Training delivers this Reciprocating Compressor Fault Diagnosis course.
Why Reciprocating Compressor Fault Diagnosis Matters Now
Three forces shape the work today. Ageing compressor fleets run closer to their design envelopes as throughput targets rise. Online monitoring systems now stream cylinder pressures, discharge temperatures and crosshead vibration to the control room. Experienced machinists are retiring with their knowledge of valve behaviour. Sites that diagnose well catch leaking valves and worn rider bands before they become trips; sites that diagnose badly replace parts by guesswork. The course rests on the thermodynamic indicator diagram, vibration severity principles and structured root cause analysis (RCA).
Who Gains Most from Reciprocating Compressor Fault Diagnosis
- Field operators who log suction, interstage and discharge readings
- Control room operators who respond to high temperature, high vibration and low capacity alarms
- Rotating equipment engineers who decide whether a unit stays online or is stopped for repair
- Condition monitoring technicians who collect and trend pressure-volume and vibration data
- Maintenance planners who schedule valve, packing and rider band work
Shift crews that send an operator, a monitoring technician and a rotating equipment engineer together gain most.
Reciprocating Compressor Fault Diagnosis Capabilities
Participants turn panel readings and spectra into a defensible call on what is failing.
- Interpret pressure-volume curves to locate leaking suction or discharge valves — run or stop decisions
- Calculate volumetric efficiency and capacity loss from measured data — production planners
- Assess discharge temperature rise across stages to isolate valve and ring faults — shift supervisors
- Apply crosshead and frame vibration trends to detect looseness and knocking — rotating equipment engineers
- Test rod drop and rider band wear readings against alarm limits — maintenance planners
- Build a fault signature record linking symptoms to root causes — reliability teams
Key Reciprocating Compressor Fault Diagnosis Terms
- Pressure-volume (PV) diagram — a plot of cylinder pressure against swept volume over one stroke.
- Volumetric efficiency — the ratio of gas actually delivered to the cylinder's swept volume, falling when valves or rings leak.
- Rod drop — the vertical movement of the piston rod as rider bands wear.
- Rider band — a non-metallic ring that carries piston weight inside the cylinder.
- Valve flutter — rapid, incomplete opening and closing of valve plates.
- Recompression — re-expansion of leaked discharge gas back into the cylinder, visible as a distorted expansion line on the PV diagram.
Reciprocating Compressor Fault Diagnosis Day by Day
Day 1: Compressor Behaviour and Failure Context
- Compression Cycle Thermodynamics — Linking Stage Ratios to Expected Temperatures
- Cylinder, Valve and Packing Anatomy — Locating the Commonest Failure Points
- Operating Envelope and Rod Load Limits — Setting Safe Running Boundaries
- Failure Mode History by Component — Prioritising What Crews Watch First
- Gas Composition and Liquid Carryover Effects — Anticipating Valve and Ring Damage
Day 2: Reading Pressure-Volume Curves
- Ideal Versus Measured PV Diagrams — Spotting Deviations That Signal Faults
- Suction and Discharge Valve Leak Signatures — Choosing Which Valve to Pull
- Ring Leakage and Recompression Patterns — Separating Ring From Valve Faults
- Clearance Pocket and Unloader Effects — Explaining Unexpected Capacity Changes
- Volumetric Efficiency Calculation — Quantifying Lost Throughput Per Cylinder
Day 3: Temperature and Vibration Evidence
- Interstage Temperature Trending — Isolating Hot Cylinders and Failing Valves
- Valve Cover Temperature Surveys — Confirming Leaks Without Stopping the Unit
- Crosshead and Frame Vibration Spectra — Detecting Looseness and Mechanical Knock
- Rod Drop and Rod Runout Monitoring — Tracking Rider Band and Crosshead Wear
- Packing Vent Flow and Temperature — Judging When Packing Replacement Is Due
Day 4: From Symptom to Root Cause
- Symptom-Cause Matrices for Compressors — Narrowing Faults From Combined Evidence
- Valve Plate Breakage and Flutter Analysis — Deciding Spring and Lift Changes
- Capacity Loss Root Cause Trees — Prioritising Valves, Rings or Process Conditions
- Lubrication Rate and Oil Analysis Findings — Linking Wear Debris to Components
- Five Whys and Fault Tree Methods — Documenting Causes Crews Can Act On
Day 5: Practising the Compressor Fault Signature Chart
- Case Study From a Gas Gathering Station — Applying PV and Temperature Evidence
- Case Study From a Refinery Hydrogen Unit — Applying Vibration and Rod Drop Data
- Run, Repair or Stop Decision Drill — Weighing Risk Against Lost Production
- Handover Notes for Maintenance Crews — Turning Diagnosis Into Targeted Work Orders
- Compressor Fault Signature Chart Build — Completing a Unit-Specific Diagnostic Reference
Applying Reciprocating Compressor Fault Diagnosis After the Course
- Lead a PV diagram and valve temperature survey on one critical unit.
- Run a symptom-cause review with the shift crew for the last compressor trip and log the confirmed root cause.
Reciprocating Compressor Fault Diagnosis Questions (FAQ)
What is reciprocating compressor fault diagnosis and why does it matter now?
It is the practice of reading pressures, temperatures and vibration to identify what is failing inside a running compressor. It matters now because monitoring data is plentiful while experienced diagnosticians are scarce, and early calls prevent trips and lost capacity.
Which roles gain most from reciprocating compressor fault diagnosis?
Field and control room operators, rotating equipment engineers and condition monitoring technicians gain most.
How does reciprocating compressor fault diagnosis differ from a compressor overhaul course?
It focuses on the running machine rather than the stripped one. An overhaul course covers dismantling, clearances and reassembly, while predictive maintenance courses cover monitoring strategy; this course trains you to read live compressor evidence and name the fault.
What do you bring back from reciprocating compressor fault diagnosis?
You bring back a fault signature chart for a unit you operate, linking typical PV, temperature and vibration patterns to their root causes.
Reciprocating Compressor Fault Diagnosis: The Way Forward
The compressor fault signature chart first informs the call on whether a hot-running unit keeps running or stops for a valve change. Operators use it on rounds, engineers use it to justify interventions, and planners use it to order parts. After its first use, revisit the baseline signatures whenever process gas or valve designs change.
Find more Maintenance, Reliability & Asset Integrity Training Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 23 – 27 November 2026 in Singapore. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Singapore, Amman, Vienna, Geneva, Barcelona, New York, Manama, Amsterdam, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 21 – 25 November 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.