Safety Valve Overhaul and Recertification Training Course
Shop discipline for relief devices: as-received testing, seat lapping, bench setting and records that release repaired valves to service.
This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 30 November – 4 December 2026 in Casablanca. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Casablanca
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
November 2026
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Safety Valve Overhaul and Recertification is a 1-week training course for mechanical technicians and inspection engineers who strip, repair, bench test and return pressure relief devices to service, and who leave with a valve recertification dossier. Every plant depends on these last-resort devices lifting at the right pressure and reseating tight, so shop discipline decides whether a vessel is protected. Jupiter Prime Training delivers this course on safety valve overhaul and recertification.
Why Safety Valve Overhaul and Recertification Matters Now
Three forces shape valve shop work today: longer run lengths between turnarounds, ageing relief devices and fewer experienced fitters who can read a disc seat by eye. A shop that laps, sets and documents each valve well keeps vessels protected and inspectors confident; one that rushes the bench test risks simmering, chatter, stuck discs and leaking seats. The course rests on risk-based inspection (RBI) thinking and on the manufacturer's maintenance manual as the controlling reference for every model.
Who Gains Most from Safety Valve Overhaul and Recertification
- Valve shop fitters who dismantle, lap and reassemble relief devices
- Inspection engineers who set test intervals and accept returned valves
- Maintenance planners who schedule removal windows and spare valve rotation
- Reliability staff who trend pop test results and failure causes
- Quality inspectors who sign tags, seals and recertification records
Site valve shops gain most when a fitter, an inspector and a planner attend together and agree one acceptance routine.
Safety Valve Overhaul and Recertification Capabilities
Participants practise the bench routine from as-received test to sealed tag, linking each check to the vessel it protects.
- Identify spring-loaded, balanced bellows and pilot-operated valve types — repair route for each device
- Record an as-received pop test before dismantling — interval review by the inspection engineer
- Lap discs and nozzles to a flat seat — reseat tightness after set pressure adjustment
- Apply cold differential test pressure corrections — set point accepted on the test bench
- Diagnose chatter, simmer and stuck disc failure causes — corrective action for the operating unit
- Compile a recertification record with tag, seal and test data — release to service
Key Safety Valve Overhaul and Recertification Terms
- Set pressure — the inlet pressure at which the valve is adjusted to open under service conditions.
- Cold differential test pressure — the bench set value corrected for back pressure and temperature so the valve lifts correctly in service.
- Blowdown — the difference between set pressure and the pressure at which the disc reseats.
- Seat leakage test — a bench check confirming the closed valve is tight below set pressure.
- As-received test — the pop test made before any repair, showing how the valve behaved while it was in service.
- Simmer — audible or visible fluid escape just below set pressure, warning of seat damage or wrong adjustment.
Safety Valve Overhaul and Recertification Day by Day
Day 1: Relief Device Families and Service Duty
- Spring-Loaded Valve Anatomy — Matching Parts to Overpressure Scenario
- Balanced Bellows Valves — Handling Variable Back Pressure
- Pilot-Operated Valves — Choosing Them for Tight Operating Margins
- Rupture Disc Combinations — Isolating Valves From Corrosive Media
- Valve Nameplate and Data Sheet Reading — Confirming Shop Repair Scope
Day 2: Removal, Receipt and As-Received Testing
- Isolation and Permit Checks — Safe Removal From Live Equipment
- Transport and Receipt Inspection — Logging Damage Before Shop Work
- As-Received Pop Test — Evidence for Extending or Cutting Intervals
- Deposit and Fouling Sampling — Tracing Process Causes of Sticking
- Shop Traveller Sheet — Tracking Each Valve Through Repair
Day 3: Dismantling, Lapping and Reassembly
- Dismantling Sequence and Spring Compression — Protecting Fitters and Parts
- Disc and Nozzle Lapping — Restoring a Flat Sealing Face
- Guide, Spindle and Bellows Inspection — Repair or Replace Decision
- Spring Condition and Range Checks — Keeping Set Point Within Range
- Reassembly Torque and Alignment — Avoiding Side Loading of the Disc
Day 4: Bench Testing and Failure Causes
- Test Bench Set-Up and Gauge Calibration — Trusting the Pop Reading
- Cold Differential Set Adjustment — Accepting the Final Set Point
- Seat Tightness and Blowdown Checks — Release or Rework Decision
- Chatter, Simmer and Leakage Diagnosis — Feedback to Process Engineers
- Inspection Interval Review — Linking Test History to Risk-Based Inspection
Day 5: Practising the Valve Recertification Dossier
- Full Shop Cycle Exercise — Applying Receipt, Repair and Test Steps
- Failure Cause Case Study — Using Bench Evidence From an Earlier Valve
- Interval Proposal Drafting — Justifying Extension With Test Trends
- Tagging, Sealing and Reinstallation Checks — Handover to Operations
- Valve Recertification Dossier — Final Record Signed for Release
Applying Safety Valve Overhaul and Recertification After the Course
- Introduce an as-received pop test log for every valve entering the shop and trend results by unit.
- Run a seat lapping and bench set-up check with the shop crew against the reassembly torque sheet.
Safety Valve Overhaul and Recertification Questions (FAQ)
What is safety valve overhaul and recertification and why does it matter now?
It is the shop process of testing, repairing, setting and documenting relief devices before they return to service. It matters now because longer run lengths leave valves in service for more years, so each shop visit must restore and prove performance.
Which roles gain most from safety valve overhaul and recertification?
Valve shop fitters and inspection engineers gain most. Planners and quality inspectors also benefit, because they schedule removals and sign release records.
How does safety valve overhaul and recertification differ from a relief valve sizing course?
It concentrates on the hands-on shop cycle rather than relief load calculation. A sizing course works out orifice areas; this course covers lapping, bench setting, failure diagnosis and release records.
What do you bring back from safety valve overhaul and recertification?
You bring back a valve recertification dossier. It holds the as-received result, final set point, tightness checks, failure cause and a proposed test interval.
Safety Valve Overhaul and Recertification: The Way Forward
The valve recertification dossier first informs whether a repaired valve is released or reworked. Inspection engineers use it to set the next test interval and planners use it to book spare valve rotation. After its first use, revisit the as-received trend, because repeated stuck discs or simmering usually point back to a process cause rather than shop workmanship.
Find more Maintenance, Reliability & Asset Integrity Training Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 30 November – 4 December 2026 in Casablanca. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Casablanca, Muscat, Dar es Salaam, Abu Dhabi, Milan, Madrid, Paris, Vienna, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 6 – 10 June 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.