Decommissioning of Onshore Oil and Gas Structures Training Course
Practical methods for engineers retiring ageing plants and pipelines, from condition surveys and cutting to waste reuse and site restoration.
This 1-week course has 25 dates from December 2026 to November 2027 in 24 cities and live online. The next session runs 6 – 10 December 2026 in Istanbul. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.
See dates and book Download brochure (PDF) Training for your team
- Duration
- 1 Week
- Next start
- Istanbul
- Scheduled dates
- 25
- Classroom cities
- 24
- Classroom fee from
- 4,000 £
- Online fee from
- 2,900 £
When and where does this course run?
Showing 1–20 of 25 dates
December 2026
January 2027
February 2027
March 2027
April 2027
May 2027
June 2027
July 2027
August 2027
September 2027
Can’t find a suitable date? Tell us what you need.
What does this course cover?
Decommissioning of Onshore Oil and Gas Structures is a 1-week training course for structural, onshore facility and pipeline engineers who prepare ageing plants and buried lines for safe removal, ending with a Site Decommissioning Execution Dossier. As fields mature and processing sites close, owners must retire steel, concrete and pipe without leaving hazards or liabilities in the ground. Jupiter Prime Training delivers this course on decommissioning of onshore oil and gas structures.
Why Decommissioning of Onshore Oil and Gas Structures Matters Now
Three forces shape onshore retirement today: plants and gathering lines past design life, landowners expecting usable land back, and pressure to recover steel rather than landfill it. Poor structural understanding risks collapse, releases from trapped inventory and lasting soil contamination; good handling frees land, recovers material value and closes site records without residual exposure for the owner. Late or shallow surveys also delay contractor mobilisation. The course rests on the waste hierarchy, the hierarchy of hazard controls and risk-based integrity assessment, applied in general engineering terms.
Who Gains Most from Decommissioning of Onshore Oil and Gas Structures
- Engineers assessing residual strength of frames, foundations and pipe supports
- Facility engineers isolating and flushing process units
- Pipeline engineers deciding whether buried lines are removed or left in place
- Waste specialists classifying scrap, residues and reusable equipment
- Site engineers planning earthworks, remediation and land handover
A plant or pipeline asset group gains most when its structural, process and environmental engineers attend together.
Decommissioning of Onshore Oil and Gas Structures Capabilities
Participants move from surveying a tired structure to restoring its ground.
- Assess corrosion, section loss and foundation condition of ageing structures — demolition sequence approval
- Specify isolation, purging and cleaning steps for process vessels and lines — hot-work permit authority
- Weigh mechanical, thermal and abrasive water-jet cutting options — contractor method statements
- Design a material segregation plan for scrap, reusable items and hazardous residues — waste receivers
- Calculate lifting loads and temporary support needs during partial dismantling — crane and rigging planners
- Communicate a restoration end state and verification sampling plan — landowners and environmental auditors
Key Decommissioning of Onshore Oil and Gas Structures Terms
- Condition survey — an inspection recording corrosion, cracking and foundation state to judge safe dismantling.
- Hydrocarbon-free certificate — a signed record that equipment is drained, flushed and gas-tested before cutting.
- Abandonment in place — leaving a cleaned, sealed pipeline buried when removal causes more harm than it prevents.
- Naturally occurring radioactive material (NORM) — scale and sludge in production equipment carrying elevated natural radioactivity needing controlled disposal.
- Material passport — a record of an item's grade, condition and history that lets steel or equipment be resold or reused.
- Site restoration end state — the agreed final condition of land, soil and drainage that marks the site ready for handover.
Decommissioning of Onshore Oil and Gas Structures Day by Day
Day 1: Ageing Assets and Retirement Drivers
- Asset Register Review — Which Plants, Racks and Lines Enter Retirement
- Late-Life Integrity Data — Deciding Survey Scope for Each Structure
- Stakeholder Mapping of Landowners and Neighbours — Agreeing Land Use Expectations
- Decommissioning Option Screening — Remove, Clean in Place or Repurpose
- Hazard Inventory of Trapped Fluids and Residues — Early Isolation Priorities
Day 2: Structural Condition Surveys
- Visual and Ultrasonic Thickness Surveys — Measuring Section Loss on Steel Members
- Foundation and Anchor Bolt Assessment — Judging Stability During Partial Removal
- Residual Strength Calculation — Setting Safe Load Limits for Dismantling
- Tank and Vessel Shell Inspection — Choosing Cutting Lines and Lifting Points
- Buried Pipeline Coating and Wall Surveys — Remove or Abandon in Place
Day 3: Isolation, Cleaning and Cutting Methods
- Positive Isolation and Purging Procedures — Issuing Hydrocarbon-Free Certificates
- Pigging and Chemical Flushing of Pipelines — Verifying Residual Contamination Levels
- Mechanical Shears and Diamond Wire Cutting — Matching Tool to Member Size
- Thermal Versus Cold Cutting Selection — Controlling Fire and Fume Exposure
- Lift Planning and Temporary Bracing — Sequencing Removal Without Progressive Collapse
Day 4: Waste Streams and Material Reuse
- Waste Hierarchy Application — Ranking Reuse, Recycling and Disposal Routes
- NORM Scale and Sludge Handling — Segregation, Packaging and Receiver Acceptance
- Material Passports for Equipment and Steel — Enabling Resale and Reuse
- Asbestos and Insulation Removal Planning — Protecting Crews Before Demolition
- Scrap Tracking and Chain of Custody — Proving Final Destination of Material
Day 5: Practising the Site Decommissioning Execution Dossier
- Soil and Groundwater Sampling Plans — Confirming Contamination Boundaries
- Earthworks and Drainage Reinstatement — Restoring Stable Ground and Runoff Paths
- Integrated Dismantling Sequence — Combining Survey, Cutting and Lift Findings
- Waste Route Register — Linking Segregation Plans to Licensed Receivers
- Site Decommissioning Execution Dossier — Assembling Surveys, Sequence and Restoration Plan
Applying Decommissioning of Onshore Oil and Gas Structures After the Course
- Lead a condition survey of one retiring pipe rack using the residual strength method.
- Build a reuse register for one process unit, tagging items with material passports.
Decommissioning of Onshore Oil and Gas Structures Questions (FAQ)
What is decommissioning of onshore oil and gas structures and why does it matter now?
It is the engineered retirement of land-based plants and pipelines, from survey to restored ground. Many sites are now past design life and must be removed safely.
Which roles gain most from decommissioning of onshore oil and gas structures training?
Structural, facility and pipeline engineers gain most. Waste, lifting and remediation planners also gain from one shared dismantling sequence.
How does decommissioning of onshore oil and gas structures differ from offshore decommissioning training?
It focuses on land sites rather than marine removal. It covers tank farms, pipe racks, buried lines and soil restoration instead of heavy-lift vessels and seabed clearance.
What do you bring back from decommissioning of onshore oil and gas structures training?
You bring back a dossier for a real or model site. It combines survey findings, cutting methods, a waste route register and a restoration plan.
Decommissioning of Onshore Oil and Gas Structures: The Way Forward
The Site Decommissioning Execution Dossier first informs the choice between removing a structure and cleaning it in place. Structural, process and environmental engineers use it to agree a single dismantling sequence and waste route. After its first use, revisit the restoration end state with landowners, since sampling results often shift the boundary of soil that must be treated.
Find more Petroleum Engineering & Oil and Gas Operations Courses by city
Questions about dates, fees and booking
When does this course next run?
The next session runs 6 – 10 December 2026 in Istanbul. It is one of 25 dates scheduled up to November 2027.
Where is this course held?
In a classroom in 24 cities: Istanbul, New York, Rome, Muscat, Dubai, Amsterdam, Kuala Lumpur, Vienna, and more. It is also scheduled as live online sessions.
Can I attend this course online?
Yes. One date is scheduled as a live online session: 31 October – 4 November 2027, from 2,900 £ per participant.
How long is the course?
1 Week. Each date shows its start and end dates.
How much does the course cost?
Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.
Is there a brochure for this course?
How do I book a place?
Choose a date above and select Register, or send us an enquiry.
Can this course be run for our team?
Yes. Tell us the number of participants and your preferred dates and city through our training request form.