Skip to content

Valve Actuator Selection, Torque Sizing and Upkeep Training Course

Selection and torque sizing for electric, pneumatic and hydraulic valve actuators, with fail-safe logic, stroke testing and upkeep for maintenance engineers.

This 1-week course has 25 dates from November 2026 to November 2027 in 24 cities and live online. The next session runs 22 – 26 November 2026 in Sharm El-Sheikh. Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online.

See dates and book Download brochure (PDF) Training for your team

Duration
1 Week
Next start
Sharm El-Sheikh
Scheduled dates
25
Classroom cities
24
Classroom fee from
4,000 £
Online fee from
2,900 £

When and where does this course run?

Showing 1–20 of 25 dates

November 2026

December 2026

January 2027

February 2027

March 2027

April 2027

July 2027

August 2027

September 2027

Can’t find a suitable date? Tell us what you need.

What does this course cover?

Valve Actuator Selection, Torque Sizing and Upkeep is a 1-week training course for instrument and mechanical maintenance engineers who specify and maintain automated valves, ending with an actuator selection and torque datasheet. Remote operation depends on actuators that move every time. Jupiter Prime Training delivers this course on Valve Actuator Selection, Torque Sizing and Upkeep.

Why Valve Actuator Selection, Torque Sizing and Upkeep Matters Now

Three forces shape actuator work today. More isolation and emergency valves in refineries, water networks and power plants are operated from the control room, so a seized gearbox or weak spring becomes a process safety issue. Maintenance budgets favour condition-led intervention, which needs stroke and torque data from the actuator. Experienced fitters are retiring with the judgement once used to pick springs and motor ratings. Plants that size and maintain actuators well avoid failed trips; others pay in lost production and unplanned outages.

Who Gains Most from Valve Actuator Selection, Torque Sizing and Upkeep

  • Instrument engineers responsible for positioners, solenoids and diagnostics
  • Mechanical maintenance engineers responsible for gearboxes, yokes and stems
  • Project and commissioning engineers responsible for actuator datasheets
  • Reliability engineers responsible for failure modes and proof testing
  • Electrical engineers responsible for motor-operated valve supplies

The greatest gain comes when instrument, mechanical and electrical engineers from one unit attend together, since actuator faults cross all three trades.

Valve Actuator Selection, Torque Sizing and Upkeep Capabilities

Participants move from reading a valve torque curve to choosing the drive, margin and fail action, then keeping that match intact in service.

  • Calculate breakaway and running torque for quarter-turn and multi-turn valves — the actuator sizing decision
  • Weigh electric, pneumatic and hydraulic drives against supply and speed — the technology choice
  • Specify spring-return, double-acting and stay-put fail actions — the process safety team
  • Apply stroke tests and seat leakage classes — the proof testing and acceptance record
  • Build a condition-led actuator maintenance routine — maintenance planners
  • Communicate actuator faults and replacements — operations and the turnaround team

Key Valve Actuator Selection, Torque Sizing and Upkeep Terms

  • Breakaway torque — the torque needed to unseat a closed valve, usually the peak of the torque curve.
  • Safety factor — the margin added to the calculated valve torque as friction and supply pressure change.
  • Fail action — the position a valve takes on loss of air, power or signal: fail-open, fail-closed or fail-in-place.
  • Positioner — a device that compares the control signal with the stem position and adjusts actuator pressure.
  • Partial stroke test — a short movement of an emergency valve that proves it is free without interrupting the process.
  • Seat leakage class — a rating of how much fluid a closed valve may pass.

Valve Actuator Selection, Torque Sizing and Upkeep Day by Day

Day 1: Valve Duties and Actuator Families

  • Gate, Globe, Ball and Butterfly Valves — Which Motion and Torque Profile Applies
  • Quarter-Turn Versus Multi-Turn Drives — Matching Actuator Geometry to Valve Stem
  • Pneumatic Diaphragm and Piston Actuators — Where Plant Air Suits the Duty
  • Electric Motor-Operated Actuators — When Remote Isolation Justifies a Power Supply
  • Electro-Hydraulic and Gas-Over-Oil Drives — Choosing for Large Bore and Remote Sites

Day 2: Torque and Thrust Calculation

  • Valve Torque Curves — Reading Breakaway, Running and End Values
  • Differential Pressure and Packing Friction Effects — Setting the Design Torque Basis
  • Scotch-Yoke and Rack-and-Pinion Output Curves — Matching Actuator Output to Valve Demand
  • Spring Sizing at Minimum Supply Pressure — Confirming Fail Action Still Seats the Valve
  • Safety Factors and Oversizing Risks — Protecting Stems, Couplings and Seats

Day 3: Accessories, Controls and Fail-Safe Logic

  • Positioners and Smart Diagnostics — Choosing Feedback Level for Each Valve
  • Solenoid Valves, Quick Exhausts and Volume Boosters — Meeting Required Stroke Times
  • Limit Switches and Position Transmitters — Proving Open and Closed States to Control
  • Motor Starters, Torque Switches and Limit Settings — Stopping Electric Drives Without Damage
  • Fail-Open, Fail-Closed and Stay-Put Logic — Aligning Actuators with Process Hazards

Day 4: Testing, Diagnostics and Maintenance

  • Stroke Time and Full Stroke Tests — Accepting Actuators at Commissioning
  • Partial Stroke Testing on Emergency Valves — Extending Proof Test Intervals Safely
  • Seat Leakage Classes and Bench Testing — Setting Repair Acceptance Limits
  • Seal Kits, Gearbox Lubrication and Spring Checks — Planning Preventive Actuator Tasks
  • Torque Signature and Air Consumption Trends — Spotting Degradation Before Failure

Day 5: Practising the Actuator Selection and Torque Datasheet

  • Failure Case Review From Two Sectors — Tracing Stalls and Failed Trips to Root Cause
  • Applying Torque Calculations to a Live Duty — Confirming Margin at Worst Conditions
  • Applying Accessory and Fail Action Choices — Completing the Control Package
  • Applying Test and Maintenance Intervals — Setting the Actuator Upkeep Routine
  • Actuator Selection and Torque Datasheet — Presenting the Finished Duty Specification

Applying Valve Actuator Selection, Torque Sizing and Upkeep After the Course

  • Recheck torque margin on five critical shutdown valves against current supply pressure.
  • Start torque signature trending for one unit's motor-operated valves.

Valve Actuator Selection, Torque Sizing and Upkeep Questions (FAQ)

What is valve actuator selection, torque sizing and upkeep, and why does it matter now?

It is matching each valve to a drive with enough torque, the right fail action and a reliable maintenance routine. It matters now because a failed remote stroke becomes a safety loss.

Which roles gain most from valve actuator selection, torque sizing and upkeep?

Instrument, mechanical, electrical and reliability engineers gain most. You share one method, so faults stop falling between trades.

How does valve actuator selection, torque sizing and upkeep differ from a control valve sizing course?

It focuses on the drive rather than the valve trim. Control valve sizing covers flow coefficients and noise; this covers torque, fail action and actuator care for isolation valves in oil and gas and water plants.

What do you bring back from valve actuator selection, torque sizing and upkeep?

You bring back a completed actuator selection and torque datasheet for a real duty. It records torque basis, drive, margin, fail action and test intervals.

Valve Actuator Selection, Torque Sizing and Upkeep: The Way Forward

The actuator selection and torque datasheet first informs whether a critical valve's drive still has enough margin. Instrument and mechanical engineers use it with planners and process safety. After first use, revisit safety factors and test intervals once field stroke and torque trends are gathered from the plant.

Questions about dates, fees and booking

When does this course next run?

The next session runs 22 – 26 November 2026 in Sharm El-Sheikh. It is one of 25 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 24 cities: Sharm El-Sheikh, Dar es Salaam, Milan, London, Muscat, Madrid, Kuala Lumpur, New York, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 14 – 18 November 2027, from 2,900 £ per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from 4,000 £ (Cairo) to 9,500 £ (New York) in a classroom, and from 2,900 £ live online. Each date shows its own fee.

Is there a brochure for this course?

How do I book a place?

Choose a date above and select Register, or send us an enquiry.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

More ways to train